To multiply decimals, multiply the numbers as if there were no decimal points, then count the decimal places in both numbers and give the answer that many decimal places. To divide by a decimal, multiply both numbers by 10, 100 or 1000 until you are dividing by a whole number, then divide as usual. Always estimate first, so you know roughly what the answer should be.
In NCERT's Ganita Prakash, decimals come in two parts of the Class 7 course: Part I Chapter 3, "A Peek Beyond the Point", and Part II Chapter 4, "Another Peek Beyond the Point", which NCERT describes as decimals with multiplication and division. This guide explains the methods, why they work and how to check answers. If decimals keep slipping at school, our Class 7 maths home tuition can help one to one.
Place value: the base for everything
Each place is worth ten times the place to its right.
| Thousands | Hundreds | Tens | Ones | . | Tenths | Hundredths | Thousandths |
|---|---|---|---|---|---|---|---|
| 1000 | 100 | 10 | 1 | . | 1/10 | 1/100 | 1/1000 |
So 3.46 means 3 ones, 4 tenths and 6 hundredths, which is 346/100. Seeing a decimal as a fraction with 10, 100 or 1000 at the bottom is the key to both methods in this guide.
Multiplying and dividing by 10, 100 and 1000
Multiplying by 10 makes every digit worth ten times as much, so each digit moves one place to the left. Dividing by 10 moves each digit one place to the right. The usual shortcut is to "move the decimal point", which gives the same result.
| Calculation | Move | Answer |
|---|---|---|
| 0.9 × 10 | 1 place | 9 |
| 4.08 × 100 | 2 places | 408 |
| 2.5 × 1000 | 3 places (fill with zeros) | 2500 |
| 37.2 ÷ 10 | 1 place | 3.72 |
| 6.1 ÷ 100 | 2 places | 0.061 |
| 52.6 ÷ 1000 | 3 places | 0.0526 |
Count the zeros in 10, 100 or 1000. That is how many places to move. When you run out of digits, fill the gaps with zeros.
Multiplying two decimals
Method:
- Ignore the decimal points and multiply the whole numbers.
- Count the total number of decimal places in the two numbers you multiplied.
- Put the decimal point so the answer has that many decimal places.
- Compare with your estimate.
Why it works. 0.3 × 0.2 is 3/10 × 2/10 = 6/100 = 0.06. Tenths times tenths gives hundredths, so 1 decimal place plus 1 decimal place gives 2 decimal places. The counting rule is just fraction multiplication in disguise.
A surprise for many students: multiplying by a number less than 1 makes the answer smaller. 8 × 0.5 = 4, because taking "half of 8" gives less than 8.
Dividing decimals
Dividing a decimal by a whole number. Divide as usual and keep the decimal point in the answer directly above the decimal point in the number being divided.
Dividing by a decimal. Change the question into one with a whole-number divisor. Multiply both numbers by the same power of 10. This does not change the answer, because 9.36 ÷ 0.12 and 936 ÷ 12 describe the same sharing: both numbers have grown by the same factor.
Dividing past the decimal point. Sometimes a division does not come out exactly in whole numbers. Put a decimal point after the number and add zeros, then keep dividing. Some divisions end (7 ÷ 8 = 0.875). Others repeat for ever (2 ÷ 3 = 0.666…), and the question will tell you how many decimal places to give.
Worked examples
Example 1: multiplying two decimals.
Find 3.46 × 2.5.
Estimate: about 3.5 × 2.5, which is a little under 9.
Multiply without points: 346 × 25 = 8650.
Count decimal places: 3.46 has 2 and 2.5 has 1, so 3 in total.
Place the point: 8.650, which is 8.65.
Check: 8.65 is a little under 9, as the estimate said.
Example 2: small decimals.
Find 0.07 × 0.6.
Multiply without points: 7 × 6 = 42.
Count decimal places: 0.07 has 2 and 0.6 has 1, so 3 in total.
The answer needs 3 decimal places, but 42 has only two digits, so add a zero in front: 0.042.
Check with fractions: 7/100 × 6/10 = 42/1000 = 0.042. Both numbers are less than 1, so the answer is smaller than either of them, which makes sense.
Example 3: long division into decimals.
(a) Find 17.04 ÷ 6.
6 into 17 goes 2 times, remainder 5. Write 2, then the decimal point above the decimal point.
Bring down 0: 50. 6 into 50 goes 8 times (48), remainder 2.
Bring down 4: 24. 6 into 24 goes 4 times, remainder 0.
Answer: 2.84. Check: 2.84 × 6 = 17.04.
(b) Find 7 ÷ 8 as a decimal.
8 does not go into 7, so write 0 and a decimal point, then add zeros: 7.000.
70 ÷ 8 = 8 remainder 6. 60 ÷ 8 = 7 remainder 4. 40 ÷ 8 = 5 remainder 0.
Answer: 0.875.
Example 4: dividing by a decimal.
A rope 6.75 m long is cut into pieces each 0.45 m long. How many pieces are there?
We need 6.75 ÷ 0.45.
The divisor 0.45 has 2 decimal places, so multiply both numbers by 100: 675 ÷ 45.
45 × 15 = 675, so the answer is 15 pieces.
Estimate check: 0.45 is close to 0.5, and 6.75 ÷ 0.5 is about 13 or 14, so 15 is sensible. (It is a little more than 13.5 because 0.45 is a little less than 0.5.)
Quick estimation checks
Estimating takes ten seconds and catches most decimal-point errors.
- Round to friendly numbers. 3.46 × 2.5 is close to 3.5 × 2.5 or even 3 × 3. Either tells you the answer is near 9, not 0.9 or 86.
- Ask "bigger or smaller than I started with?" Multiplying by more than 1 makes a number bigger; multiplying by a number between 0 and 1 makes it smaller. Dividing by a number between 0 and 1 makes it bigger. 6.75 ÷ 0.45 must be more than 6.75.
- Reverse the operation. For a division, multiply your answer by the divisor. 15 × 0.45 = 6.75, so Example 4 is right.
Common mistakes
- Lining up the points when multiplying. That rule is for adding and subtracting. For multiplying, count decimal places instead.
- Forgetting placeholder zeros. 0.07 × 0.6 written as 0.42 instead of 0.042.
- Moving the point only in the divisor. In 9.36 ÷ 0.12, changing just 0.12 to 12 gives 0.78. Both numbers must be multiplied by 100: 936 ÷ 12 = 78.
- Moving the point the wrong way. 52.6 ÷ 1000 written as 52 600. Dividing should make the number smaller.
- Stopping too early in long division. If there is a remainder, add a zero and keep going until it ends or the question's decimal places are reached.
- Dropping trailing zeros too soon. In 8.650, remove the final zero only after the decimal point is placed.
How to practise at home (10–15 minutes a day)
- Kitchen sums. Use packet weights and lengths around the house. "A bag weighs 2.35 kg. What do 14 bags weigh?" (32.9 kg.)
- Power-of-10 races. Call out a number and "times 100" or "divided by 1000". Your child says the answer aloud. One minute a day is enough.
- Estimate first, then calculate. For five questions a day, ask for an estimate before any working. Praise a sensible estimate as much as a correct answer.
- Fraction check. Once a week, check one multiplication by rewriting the decimals as fractions, as in Example 2.
- Explain one answer. Ask your child to explain why the decimal point goes where it does.
Decimals connect to many other Class 7 topics. The same sign rules from integer rules for signs apply when decimals are negative, for example (−0.4) × 0.5 = −0.2. Decimals are also fractions with 10, 100 or 1000 at the bottom, a link our guide to Class 6 fractions builds from the start. You can see where both decimal chapters fall in the year in our CBSE Class 7 maths syllabus guide. In Class 8, decimals are used constantly in percentages; see our Class 8 maths tutor page for that next step.
How Maths Bodhi helps
Our tutors start from place value and fractions, so the decimal-point rules make sense rather than feeling like magic. Every method is taught together with an estimation check. We track which mistake your child makes most often and give short, targeted practice on it. For families outside Gurgaon, online maths tuition follows the same approach.
Home tuition is available in Gurgaon (Gurugram). Students elsewhere in India and abroad learn with us online. You can book a free demo class.
Frequently asked questions
- How do you multiply decimals in Class 7?
- Multiply the numbers without the decimal points, count the total decimal places in both numbers, and give the answer that many decimal places. Then check against an estimate.
- How do you divide a decimal by a decimal?
- Multiply both numbers by the same power of 10 so the divisor becomes a whole number, then divide. For example, 9.36 ÷ 0.12 becomes 936 ÷ 12 = 78.
- Why does multiplying by a decimal sometimes make a number smaller?
- Multiplying by a number between 0 and 1 means taking part of something. 8 × 0.5 is half of 8, which is 4.
- How do you multiply a decimal by 100?
- Move each digit two places to the left, which is the same as moving the decimal point two places to the right. For example, 4.08 × 100 = 408.
- What do you do if a division leaves a remainder?
- Put a decimal point after the number, add zeros and keep dividing. For example, 7 ÷ 8 = 0.875. Some divisions repeat for ever, such as 2 ÷ 3 = 0.666…
- Which Class 7 chapters cover decimals?
- In NCERT's Ganita Prakash, Part I Chapter 3, "A Peek Beyond the Point", and Part II Chapter 4, "Another Peek Beyond the Point".
