Two short rules do most of the work in Topic 3 of Cambridge IGCSE Additional Mathematics. The remainder theorem says that when a polynomial p(x) is divided by (x − a), the remainder is p(a). The factor theorem follows from it: (x − a) is a factor of p(x) exactly when p(a) = 0. With those two facts and some careful division, you can find unknown coefficients, factorise cubics and solve cubic equations.
The ideas are simple, but questions pile them together, and one arithmetic slip with negative numbers wrecks the whole answer. Working through them with an Additional Maths tutor is often the quickest way to make the method reliable.
Where it sits in the syllabus
Topic 3, Factors of polynomials, has three learning outcomes in the 2025–2027 syllabus:
- 3.1 Know and use the remainder and factor theorems.
- 3.2 Find factors of polynomials. For a cubic, you are first expected to write it as a linear factor times a quadratic factor, by observation or by algebraic long division.
- 3.3 Solve cubic equations.
There is no Core or Extended version of 0606: everyone sits the same two papers, so this topic can appear on non-calculator Paper 1 or calculator Paper 2. None of the results are in the List of formulas. You can see the topic's neighbours on our complete 0606 topic map.
The theorems, with the divisor (ax − b)
For a divisor such as (2x − 1), set it equal to zero: x = 1/2. Then:
- the remainder when p(x) is divided by (2x − 1) is p(1/2);
- (2x − 1) is a factor if p(1/2) = 0.
For (x + 3), use x = −3. Students who substitute +3 for a divisor of (x + 3) lose every mark that follows, so write "x + 3 = 0, x = −3" as a habit.
Worked example 1: two unknown coefficients
p(x) = 2x³ + ax² + bx − 6. (x − 2) is a factor of p(x), and the remainder when p(x) is divided by (x + 1) is −12. Find a and b, and show that p(x) = 0 has only one real root.
Factor condition: p(2) = 0.
16 + 4a + 2b − 6 = 0, so 4a + 2b = −10, which simplifies to 2a + b = −5.
Remainder condition: p(−1) = −12.
−2 + a − b − 6 = −12, so a − b = −4.
Solve together: adding the two equations gives 3a = −9, so a = −3, and then b = 1.
So p(x) = 2x³ − 3x² + x − 6. Check: p(2) = 16 − 12 + 2 − 6 = 0.
Only one real root: divide by (x − 2) to get p(x) = (x − 2)(2x² + x + 3). The quadratic factor has discriminant 1² − 4(2)(3) = −23 < 0, so it has no real roots. The only real root is x = 2. The last step uses the discriminant from our guide to quadratic functions and the discriminant, which is exactly how 0606 likes to link topics.
Worked example 2: solve a cubic equation
Solve x³ − 4x² − 7x + 10 = 0.
Find one root by trial. Any integer root must divide the constant 10, so try ±1, ±2, ±5, ±10. p(1) = 1 − 4 − 7 + 10 = 0, so (x − 1) is a factor.
Find the quadratic factor. Compare coefficients: x³ − 4x² − 7x + 10 = (x − 1)(x² + bx + c).
- The constant term: −c = 10, so c = −10.
- The x² term: b − 1 = −4, so b = −3.
So the cubic is (x − 1)(x² − 3x − 10) = (x − 1)(x − 5)(x + 2).
x = 1, x = 5 or x = −2.
Comparing coefficients is often faster than long division when the leading coefficient is 1. Use the x term as a test: expanding (x − 1)(x² − 3x − 10) gives −10x + 3x = −7x, which matches.
Worked example 3: algebraic division with a remainder
Divide 3x³ − 2x² + 5 by (x + 2), giving the quotient and remainder.
Notice that there is no x term, so write the dividend as 3x³ − 2x² + 0x + 5. Leaving out the zero term is the most common cause of a wrong quotient.
Long division, step by step:
- 3x³ ÷ x = 3x². Multiply: 3x²(x + 2) = 3x³ + 6x². Subtract: −8x² + 0x.
- −8x² ÷ x = −8x. Multiply: −8x(x + 2) = −8x² − 16x. Subtract: 16x + 5.
- 16x ÷ x = 16. Multiply: 16(x + 2) = 16x + 32. Subtract: −27.
Quotient 3x² − 8x + 16, remainder −27.
Check with the remainder theorem: p(−2) = 3(−8) − 2(4) + 5 = −24 − 8 + 5 = −27. The two methods agree.
Worked example 4: a factor of the form (2x − 1)
Show that (2x − 1) is a factor of 4x³ + 8x² − x − 2, and hence factorise it completely.
Show: p(1/2) = 4(1/8) + 8(1/4) − 1/2 − 2 = 1/2 + 2 − 1/2 − 2 = 0. So (2x − 1) is a factor.
Factorise: here grouping is quicker than division. 4x³ + 8x² − x − 2 = 4x²(x + 2) − 1(x + 2) = (x + 2)(4x² − 1).
4x² − 1 is a difference of two squares, so the full answer is (x + 2)(2x − 1)(2x + 1).
"Factorise completely" means every factor must be linear or irreducible. Stopping at (x + 2)(4x² − 1) loses the final mark.
Choosing a method
| Situation | Fastest method |
|---|---|
| Only the remainder is asked | Remainder theorem: substitute |
| Show something is a factor | Substitute and get 0, then write a conclusion |
| Leading coefficient 1, one root known | Compare coefficients |
| Leading coefficient not 1, or a remainder is needed | Long division |
| Coefficients pair up (as in Example 4) | Grouping |
Paper 1 and Paper 2
On the non-calculator paper, roots are chosen to be small integers or simple fractions, so trial values are quick to test by hand. Fractions such as p(1/2) must be handled exactly.
On the calculator paper, you may use the calculator to evaluate p(a) quickly or to check the roots of the final quadratic. But "show that" and "factorise" still need algebra on the page, and a cubic solved only by calculator equation mode will not earn the method marks.
Mistakes our tutors see
- Wrong sign of a for divisors like (x + 1). Write the divisor equal to zero first.
- Missing zero terms in long division.
- Not finishing the factorisation, for example leaving a difference of two squares.
- No conclusion sentence after p(a) = 0. Write "so (x − a) is a factor".
- Arithmetic with negatives: (−2)³ = −8, not 8.
- Rejecting a quadratic factor too early. Check its discriminant before saying there are no more roots.
When to get help with this topic
- You get the right a and b only when the remainder is zero, and freeze on non-zero remainders.
- Long division of polynomials still feels like a separate trick rather than something you trust.
- You can find one root but cannot get from there to the full factorisation.
- Questions with a factor like (3x + 2) make you guess rather than substitute.
Each of these is a short fix with someone watching your working, and it pays off later when cubics appear in curve sketching and in modulus inequalities.
Self-check
- Find the remainder when x³ + 2x² − 5x + 1 is divided by (x − 2).
- (x + 3) is a factor of x³ + kx² + x − 6. Find k, then factorise completely.
- Solve 2x³ − 3x² − 11x + 6 = 0.
- Find the remainder when 4x³ − x + 5 is divided by (2x + 1).
Answers. 1: p(2) = 8 + 8 − 10 + 1 = 7. 2: p(−3) = −27 + 9k − 3 − 6 = 0, so k = 4, and x³ + 4x² + x − 6 = (x + 3)(x + 2)(x − 1). 3: p(3) = 0, so the cubic is (x − 3)(2x² + 3x − 2) = (x − 3)(2x − 1)(x + 2), giving x = 3, 1/2 or −2. 4: p(−1/2) = −1/2 + 1/2 + 5 = 5.
Where this leads
Once a cubic is written as three linear factors, you can sketch it and its modulus, and solve cubic inequalities graphically; see cubic graphs and their moduli in Topic 4. Because so much of this topic is hand arithmetic, our Paper 1 non-calculator strategy is worth reading alongside it. If you need to rebuild basic factorising first, go back to 0580 expanding and factorising.
After IGCSE, the factor theorem grows into the study of polynomial roots and their sums and products, covered in IB AA HL polynomials and the factor theorem.
How Maths Bodhi helps
In the free demo, our tutor sets one unknown-coefficient question and one division question, then reads the working line by line to see where signs or zero terms go wrong. Lessons then build accuracy before speed, with written method checked each time. Grade 10 students preparing for the exam can also look at our Class 10 IGCSE maths support.
Home tuition is available in Gurgaon (Gurugram). Students elsewhere in India and abroad learn with us online. You can book a free demo class.
Written and checked by the Maths Bodhi team. Facts checked against official Cambridge International and Pearson sources, November 2026.
Frequently asked questions
- What is the remainder theorem in IGCSE Additional Maths?
- When a polynomial p(x) is divided by (x − a), the remainder is p(a). For a divisor (ax − b), the remainder is p(b/a).
- What is the factor theorem?
- (x − a) is a factor of the polynomial p(x) if and only if p(a) = 0. It is the special case of the remainder theorem where the remainder is zero.
- How do you solve a cubic equation in 0606?
- Find one root by testing factors of the constant term, write the cubic as a linear factor times a quadratic factor by division or comparing coefficients, then solve the quadratic.
- Do I need polynomial long division for 0606?
- Yes. The syllabus expects you to obtain a linear factor and a quadratic factor by observation or by algebraic long division, and long division is the safest method when a remainder is asked for.
- Can I use a calculator to solve cubics on Paper 2?
- A calculator can check roots, but questions that ask you to show a factor, factorise or solve usually need the algebra written out to earn the method marks.
