When the number in front of x² is not 1, the quick "two numbers that add to b and multiply to c" trick stops working on its own. The reliable fix is the ac method: multiply a by c, find two numbers that multiply to ac and add to b, split the middle term with them, and factorise in pairs. It works every time the quadratic factorises, and it turns guesswork into a routine.
In the Cambridge IGCSE 0580 syllabus, factorising ax² + bx + c is listed in E2.2 Algebraic manipulation and is Extended only. Core factorising stops at common factors. Our Cambridge IGCSE maths tutor team sees this skill decide more Paper 2 marks than almost any other, because quadratic equations, algebraic fractions and curve sketching all depend on it.
First, will it factorise at all?
Before you search for factors, a ten-second test tells you whether any exist. Work out b² − 4ac:
- If it is a perfect square (0, 1, 4, 9, 16, 25, ...), the quadratic factorises with whole numbers.
- If it is not, it does not, and an equation would need the quadratic formula instead.
For 6x² + 11x − 10: b² − 4ac = 121 + 240 = 361 = 19². It factorises. For 2x² + 5x − 1: 25 + 8 = 33, not a square, so stop and use the formula. This test is not a named syllabus item at 0580, but it saves time on Paper 2 and it becomes the discriminant in Additional Mathematics.
The ac method in five steps
- Take out any common factor first.
- Work out a × c.
- Find two numbers that multiply to ac and add to b.
- Rewrite bx as the sum of those two terms.
- Factorise the first pair and the second pair, then take out the common bracket.
| Method | How it works | When to use it |
|---|---|---|
| ac (splitting the middle) | Steps above | Default for every a ≠ 1 trinomial |
| Grid or box | Place ax² and c in a 2 × 2 grid and fill the factor pairs | Students who prefer a visual layout |
| Trial of brackets | Guess (px + q)(rx + s) and expand to test | Small a and c with few factor pairs |
All three give the same answer. The ac method is the one we teach as standard, because it needs no guessing once the pair of numbers is found.
Worked example 1: the core routine
Factorise 6x² + 11x − 10.
- No common factor.
- ac = 6 × (−10) = −60.
- Two numbers with product −60 and sum 11: 15 and −4.
- Split: 6x² + 15x − 4x − 10.
- Pairs: 3x(2x + 5) − 2(2x + 5).
Answer: (3x − 2)(2x + 5).
Check by expanding: 6x² + 15x − 4x − 10 = 6x² + 11x − 10. If this was an equation, 6x² + 11x − 10 = 0, the solutions would be x = 2/3 and x = −5/2.
Notice the sign in the second pair. When the third term is negative, take out −2, not 2, so that the bracket matches: −4x − 10 = −2(2x + 5).
Worked example 2: common factor first
Factorise fully 12x² − 22x + 6.
Every term is even, so take out 2 first: 2(6x² − 11x + 3).
Now work on 6x² − 11x + 3:
- ac = 18.
- Product 18, sum −11: −9 and −2.
- Split: 6x² − 9x − 2x + 3.
- Pairs: 3x(2x − 3) − 1(2x − 3).
Answer: 2(3x − 1)(2x − 3).
Skipping the common factor still gives a factorisation, (6x − 2)(2x − 3), but it is not "fully" factorised, because 6x − 2 still contains a 2. Examiners mark that as incomplete.
Worked example 3: a negative x² term
Factorise −5x² + 13x + 6.
A negative leading coefficient makes the search harder, so take out −1 first:
−5x² + 13x + 6 = −(5x² − 13x − 6).
Now factorise 5x² − 13x − 6:
- ac = −30.
- Product −30, sum −13: −15 and 2.
- Split: 5x² − 15x + 2x − 6.
- Pairs: 5x(x − 3) + 2(x − 3) = (5x + 2)(x − 3).
So −5x² + 13x + 6 = −(5x + 2)(x − 3), which is usually written as (5x + 2)(3 − x).
Both forms are correct. The second is tidier because it has no minus sign outside.
Worked example 4: two variables and a hidden quadratic
(a) Factorise 4a² − 4ab − 15b². (b) Factorise fully 3x⁴ − 10x² − 8.
(a) Treat b as part of the coefficients. ac = 4 × (−15) = −60, sum −4: −10 and 6.
4a² − 10ab + 6ab − 15b² = 2a(2a − 5b) + 3b(2a − 5b) = (2a + 3b)(2a − 5b).
(b) This is a quadratic in x². Write it as 3(x²)² − 10(x²) − 8. ac = −24, sum −10: −12 and 2.
3x⁴ − 12x² + 2x² − 8 = 3x²(x² − 4) + 2(x² − 4) = (3x² + 2)(x² − 4).
But x² − 4 is a difference of two squares, so the full answer is (3x² + 2)(x − 2)(x + 2). The word "fully" is the signal to look again. Our guide to common factors, grouping and the difference of two squares covers that last step.
Non-calculator and calculator papers
Factorising is tested hardest on Paper 2, where it can appear as a short question on its own, or as the first step of a quadratic equation, an algebraic fraction or a sketch. On Paper 4 you are more likely to meet it inside a context: the area of a rectangle given as an expression, or an equation that comes from a word problem.
On Paper 4, if a quadratic equation refuses to factorise after a fair try, you can use the quadratic formula from the List of formulas instead. On Paper 2 the numbers are usually chosen so that factorising works. If it does not, check your arithmetic before switching method.
Mistakes our tutors see
- Taking out the wrong sign in the second pair, so the brackets do not match.
- Missing a common factor, which leaves a factorisation that is not complete.
- Choosing a pair that multiplies to c, not ac. For 6x² + 11x − 10, the pair must multiply to −60, not −10.
- Dropping the 1: 3x(2x − 3) − (2x − 3) gives (3x − 1)(2x − 3), and the −1 must be kept.
- Writing solutions instead of factors when the question only says factorise.
- Giving up too early on large ac values. List the factor pairs of ac in order; one of them will work if b² − 4ac is a perfect square.
When to get help
- Each new question feels like trial and error, even after practice.
- You find the right pair of numbers but the brackets never match.
- Simplifying rational expressions with quadratic tops and bottoms keeps going wrong.
- You lose time on Paper 2 because one trinomial takes several minutes.
Self-check
Factorise fully:
- 2x² + 7x + 3
- 10x² − 17x + 3
- 8x² + 2x − 15
- 9x² − 30x + 25
- 18x² − 3x − 6
Answers.
- (2x + 1)(x + 3)
- (5x − 1)(2x − 3)
- (4x − 5)(2x + 3)
- (3x − 5)², a perfect square
- 3(6x² − x − 2) = 3(3x − 2)(2x + 1)
Where this leads
Factorising non-monic quadratics is the step before solving them, completing the square and sketching parabolas, all covered in our strand overview for 0580 algebra. In Additional Mathematics 0606, the test above becomes the discriminant, used to decide how many roots a quadratic has and where a line meets a curve; see our guide to 0606 quadratic functions and the discriminant.
How Maths Bodhi helps
In a free demo, our tutor sets three trinomials of rising difficulty and watches where the method breaks, usually the pair search or the matching bracket. Lessons then build speed with original exam-style items until the routine is automatic. Grade 10 students preparing for Paper 2 can see our Class 10 IGCSE maths home tutor page.
Home tuition is available in Gurgaon (Gurugram). Students elsewhere in India and abroad learn with us online. You can book a free demo class.
Written and checked by the Maths Bodhi team. Facts checked against official Cambridge International and Pearson sources, November 2026.
Frequently asked questions
- How do you factorise a quadratic when a is not 1?
- Use the ac method. Multiply a by c, find two numbers that multiply to ac and add to b, split the middle term with them, factorise each pair and take out the common bracket.
- Is factorising ax² + bx + c in IGCSE Core?
- No. In the 0580 2025 to 2027 syllabus, factorising quadratic expressions is Extended content. Core factorising is limited to taking out common factors.
- How do I know if a quadratic will factorise?
- Work out b² − 4ac. If it is a perfect square such as 49 or 361, the quadratic factorises with whole numbers. If not, solve equations with the quadratic formula instead.
- What should I do when the x² term is negative?
- Take out −1 first, factorise the positive quadratic inside the bracket, then tidy the answer, for example −(5x + 2)(x − 3) = (5x + 2)(3 − x).
- Why did I lose a mark for factorising?
- Usually because the answer was not fully factorised. Take out any common number first and check whether a bracket such as x² − 4 can be factorised again.
