Edexcel IGCSE functions questions come from section 3.2 of the 4MA1 specification, which is Higher tier only. You need four things: what a function is, the notation f(x) = … and f : x ↦ …, which values must be excluded from a domain, and how to find composite functions such as fg(x) and inverse functions f⁻¹(x). Pearson defines fg as "do g first, then f", and that one rule causes more lost marks than anything else in the topic.
This guide covers each idea with a worked example, then lists the mistakes we see most and a self-check. If functions are new or shaky close to the exam, our Edexcel IGCSE maths tuition can teach the section from the start.
What section 3.2 asks for
| Statement | What it means in practice |
|---|---|
| 3.2A A function is a mapping between elements of two sets | Each input has exactly one output |
| 3.2B Notation f(x) = … and f : x ↦ … | Two ways of writing the same rule |
| 3.2C Domain and range; values excluded from a domain | For example, exclude x = 2 from 1/(x − 2) |
| 3.2D Composite fg and inverse f⁻¹ | fg means g first, then f |
At Foundation, section 3.2 is listed as Higher tier only, so Foundation papers do not test it. Close relatives in Higher section 3.3 include transformations of graphs such as y = f(x + a) and y = af(x), which use the same notation.
The key ideas
- f(3) means "put 3 into f".
- The domain is the set of inputs allowed. You exclude a value if it makes a denominator zero, or if it would need the square root of a negative number.
- The range is the set of outputs the function actually produces.
- fg(x) = f(g(x)). Work from the inside out: apply g, then apply f to the result.
- f⁻¹ reverses f. If f(a) = b, then f⁻¹(b) = a.
Calculator or not?
Both 4MA1 papers allow a calculator, but functions questions are mostly algebra. The calculator is useful for two checks: evaluating a composite at a number, and testing an inverse by putting a value through f and then f⁻¹ to see that you get the starting value back. Neither check replaces the written algebra, which is where the marks are.
Worked example 1: composite functions in both orders
f(x) = 3x − 5 and g(x) = x² + 1. Find (a) fg(2), (b) gf(2), (c) fg(x).
(a) g first: g(2) = 2² + 1 = 5. Then f(5) = 3 × 5 − 5 = 10.
(b) f first: f(2) = 3 × 2 − 5 = 1. Then g(1) = 1² + 1 = 2.
(c) Replace the x in f with the whole of g(x): fg(x) = 3(x² + 1) − 5 = 3x² − 2.
Check (c) against (a): 3 × 2² − 2 = 10. The two orders give different answers, which is the point of the question.
Worked example 2: the inverse of a fraction function
f(x) = (2x + 3)/(x − 4), x ≠ 4. Find f⁻¹(x).
Write y = (2x + 3)/(x − 4) and rearrange for x.
- Multiply up: y(x − 4) = 2x + 3
- Expand: xy − 4y = 2x + 3
- Collect the x terms: xy − 2x = 4y + 3
- Factorise: x(y − 2) = 4y + 3
- Divide: x = (4y + 3)/(y − 2)
So f⁻¹(x) = (4x + 3)/(x − 2), x ≠ 2.
Check: f(5) = 13/1 = 13, and f⁻¹(13) = 55/11 = 5. This is the "change the subject when it appears twice" skill from Higher section 2.3, used inside a functions question.
Worked example 3: domain, excluded values and range
(a) Which value must be excluded from the domain of h(x) = 1/(x + 3)? (b) State the largest possible domain of k(x) = √(x − 2). (c) f(x) = x² + 4 for all real x. State its range.
(a) The denominator is zero when x = −3, so x = −3 is excluded.
(b) The square root needs x − 2 ≥ 0, so x ≥ 2.
(c) x² is never negative, so x² + 4 is never less than 4. The range is f(x) ≥ 4.
Write the range in terms of f(x), not x. The domain is about inputs and the range about outputs.
Worked example 4: an equation with composites
f(x) = 2x − 1 and g(x) = x². Solve fg(x) = gf(x).
- fg(x) = f(x²) = 2x² − 1
- gf(x) = g(2x − 1) = (2x − 1)² = 4x² − 4x + 1
Set them equal: 2x² − 1 = 4x² − 4x + 1, so 0 = 2x² − 4x + 2 = 2(x − 1)².
So x = 1, a repeated root. Check: fg(1) = 1 and gf(1) = 1.
This mixes composite functions with quadratic equations, which is typical of the longer Higher questions.
Common mistakes our tutors see
- Doing fg in the wrong order. fg(x) is f(g(x)): g acts first.
- Treating f⁻¹(x) as 1/f(x). The inverse reverses the function; it is not the reciprocal.
- Forgetting brackets when substituting, for example writing 3x² + 1 − 5 instead of 3(x² + 1) − 5.
- Leaving the inverse in terms of y. Rewrite it as f⁻¹(x) at the end.
- Giving the range in terms of x. Use f(x) ≥ 4, not x ≥ 4.
- Missing excluded values in both the function and its inverse.
When to get help
- The student gets fg(2) right with numbers but cannot find fg(x).
- Inverse questions stop after "y =", because rearranging with the variable on both sides is not secure.
- Domain and range are confused or left out.
- Functions has never been taught at school because the class started on Foundation.
Self-check
- f(x) = 5 − 2x. Find f⁻¹(x).
- g(x) = x/(x + 1). Which value must be excluded from the domain?
- f(x) = x + 4 and g(x) = 3x. Find gf(x) and fg(x).
- f(x) = 2x² − 3. Find f(−2).
- f(x) = (x + 7)/2. Solve f⁻¹(x) = 9.
Answers. 1: y = 5 − 2x, so x = (5 − y)/2 and f⁻¹(x) = (5 − x)/2. 2: x = −1. 3: gf(x) = 3x + 12 and fg(x) = 3x + 4. 4: 2 × 4 − 3 = 5. 5: f⁻¹(x) = 2x − 7, so 2x − 7 = 9 and x = 8; check: f(9) = 8.
Where it leads
Functions underpin almost everything after 4MA1. Cambridge Additional Mathematics 0606 opens with a whole topic on functions, IB Analysis and Approaches uses composite and inverse functions in its functions topic, and A level Pure uses them throughout. The rate of change of a function is the next 4MA1 step; read our guide to Higher-tier differentiation in 4MA1. Since a function is a mapping between sets, our page on set notation and Venn questions is useful background. Composite and inverse questions often reward a problem-solving approach, covered in what problem solving means for 4MA1 marks. For the rest of the course, see the 4MA1 content headings guide.
How Maths Bodhi helps
Our tutors check function notation in the free demo with two quick questions, one with numbers and one with algebra, which shows where the understanding breaks. Lessons then link functions to rearranging, quadratics and graphs, with written method checked each week. Strong students heading for Further Pure can continue with our Further Pure Mathematics tutors.
Home tuition is available in Gurgaon (Gurugram). Students elsewhere in India and abroad learn with us online. You can book a free demo class.
Written and checked by the Maths Bodhi team. Facts checked against official Cambridge International and Pearson sources, November 2026.
Frequently asked questions
- Are functions on the Edexcel IGCSE Foundation paper?
- No. Section 3.2 Function notation is Higher tier only in the 4MA1 specification, so composite and inverse functions are tested only on Papers 1H and 2H.
- What does fg(x) mean in Edexcel IGCSE maths?
- fg(x) means f(g(x)). Apply g first, then apply f to the result. Pearson's specification states this as "do g first, then f".
- How do you find an inverse function in IGCSE maths?
- Write y = f(x), rearrange to make x the subject, then replace y with x. Check by putting a number through f and then f⁻¹.
- Is f⁻¹(x) the same as 1/f(x)?
- No. f⁻¹ is the inverse function, which reverses f. 1/f(x) is the reciprocal of f(x), which is different.
- What values are excluded from the domain of a function?
- Values that make a denominator zero, such as x = 2 for 1/(x − 2), and values that would need the square root of a negative number.
- What is the range of a function?
- The range is the set of output values the function produces. For f(x) = x² + 4, the range is f(x) ≥ 4.
