Edexcel IGCSE differentiation is section 3.4 of the 4MA1 specification, and it is Higher tier only. You need to differentiate integer powers of x (including negative powers such as 1/x), use the derivative to find gradients, rates of change and turning points, decide whether a turning point is a maximum or a minimum from the shape of the graph, and apply calculus to kinematics and simple practical problems.
The rule is short: if y = axⁿ, then dy/dx = naxⁿ⁻¹. The marks come from using it accurately inside longer questions. This guide shows four worked examples. For one-to-one help with calculus, our Edexcel calculus and Higher-tier tutors teach this section regularly.
What section 3.4 asks for
| Statement | In practice |
|---|---|
| 3.4A The concept of a variable rate of change | The gradient of a curve changes from point to point |
| 3.4B Differentiate integer powers of x | x³, 5x, 7, 4/x, 2/x² |
| 3.4C Gradients, rates of change, stationary and turning points | Set dy/dx = 0 and solve |
| 3.4D Maxima and minima from the general shape of the graph | No second derivative needed |
| 3.4E Linear kinematics and simple practical problems | s → v → a, and optimising a quantity |
Integration is not in 4MA1. Neither are powers that are fractions, such as √x, in the differentiation statements; the specification says integer powers.
The toolkit
- Power rule: y = axⁿ gives dy/dx = naxⁿ⁻¹. So x⁴ → 4x³, 5x → 5, and a constant → 0.
- Negative powers: rewrite first. 18/x = 18x⁻¹, which differentiates to −18x⁻², or −18/x².
- Gradient at a point: substitute the x value into dy/dx.
- Stationary point: where dy/dx = 0.
- Kinematics: velocity v = ds/dt and acceleration a = dv/dt.
- Maximum or minimum: in 4MA1 you decide from the shape of the graph, for example by knowing that a positive cubic rises, turns down, then rises again. Checking the sign of the gradient either side of the point is a neat confirmation.
Calculator or not?
A calculator is allowed on both 4MA1 papers, but it cannot differentiate for you: Pearson bans calculators with symbolic differentiation. Use it for substituting values once the algebra is done, for example to find y at a turning point. Write every derivative by hand.
Worked example 1: turning points of a cubic
Find the coordinates of the turning points of y = x³ − 6x² + 9x + 2, and state which is a maximum.
Differentiate: dy/dx = 3x² − 12x + 9.
At a turning point dy/dx = 0: 3x² − 12x + 9 = 0, so x² − 4x + 3 = 0, which factorises as (x − 1)(x − 3) = 0. So x = 1 or x = 3.
Substitute back into y (not into dy/dx):
- x = 1: y = 1 − 6 + 9 + 2 = 6
- x = 3: y = 27 − 54 + 27 + 2 = 2
The curve is a positive cubic, so it rises, turns, falls and turns again. The first turning point is the maximum: (1, 6) is a maximum and (3, 2) is a minimum.
Worked example 2: a negative power
y = 2x + 18/x for x > 0. Find the minimum value of y.
Rewrite: y = 2x + 18x⁻¹. Differentiate: dy/dx = 2 − 18x⁻² = 2 − 18/x².
Set to zero: 18/x² = 2, so x² = 9 and x = 3 (since x > 0).
y = 2 × 3 + 18/3 = 12.
Check the shape: just below x = 3 the gradient is negative, and just above it is positive, so the curve falls then rises. The minimum value is y = 12, at x = 3.
Worked example 3: kinematics
A particle moves in a straight line. Its displacement from O after t seconds is s = t³ − 9t² + 24t metres, for t ≥ 0. (a) Find when the particle is at rest. (b) Find its displacement at the first of these times. (c) Find its acceleration when t = 5.
(a) Velocity v = ds/dt = 3t² − 18t + 24. At rest, v = 0: 3(t² − 6t + 8) = 0, so (t − 2)(t − 4) = 0, giving t = 2 s and t = 4 s.
(b) At t = 2: s = 8 − 36 + 48 = 20 m.
(c) Acceleration a = dv/dt = 6t − 18. At t = 5: a = 30 − 18 = 12 m/s².
"At rest" means velocity is zero, not displacement. That single phrase decides whether the method mark is earned.
Worked example 4: an open box (a practical problem)
A square sheet of card has side 12 cm. A square of side x cm is cut from each corner and the sides are folded up to make an open box. Show that the volume is V = x(12 − 2x)² and find the maximum volume.
The base is (12 − 2x) by (12 − 2x) and the height is x, so V = x(12 − 2x)².
Expand: (12 − 2x)² = 144 − 48x + 4x², so V = 4x³ − 48x² + 144x.
Differentiate: dV/dx = 12x² − 96x + 144 = 12(x² − 8x + 12) = 12(x − 2)(x − 6).
So x = 2 or x = 6. But x = 6 would use the whole sheet and give zero volume, so x = 2.
V = 2 × 8² = 128 cm³, the maximum.
Expanding before differentiating is necessary at this level, because 4MA1 only asks you to differentiate sums of powers, not products.
Common mistakes our tutors see
- Substituting into dy/dx to find y. The y-coordinate comes from the original equation.
- Differentiating 18/x as 18. Rewrite as 18x⁻¹ first.
- Dropping the constant wrongly, such as differentiating 9x as 0 or 2 as 2.
- Not rejecting an impossible value, such as x = 6 in the box or a negative time.
- Confusing "at rest" with "at O". At rest means v = 0; at O means s = 0.
- Naming the maximum without a reason. Give the shape or gradient check in a sentence.
When to get help
- The power rule is fine, but questions with fractions or negative powers go wrong.
- Turning points are found but the y-coordinates are wrong.
- Kinematics questions are skipped because velocity and acceleration feel like physics.
- The student needs to expand before differentiating and the algebra breaks down.
Self-check
- Differentiate y = 5x⁴ − 3x + 7.
- Differentiate y = 6/x².
- Find the gradient of y = x² − 4/x at the point where x = 2.
- Find the equation of the tangent to that curve at x = 2.
- A particle has velocity v = 3t² − 12t. For t > 0, when is it at rest?
Answers. 1: dy/dx = 20x³ − 3. 2: y = 6x⁻², so dy/dx = −12/x³. 3: dy/dx = 2x + 4/x², so at x = 2 the gradient is 5. 4: At x = 2, y = 4 − 2 = 2, so y − 2 = 5(x − 2), giving y = 5x − 8. 5: 3t(t − 4) = 0, so t = 4 s.
Where it leads
Differentiation in 4MA1 is a first taste. Further Pure Mathematics 4PM1 has a full calculus topic, Cambridge Additional Mathematics 0606 includes calculus with no formulas given, and IB Analysis and Approaches and A level Pure Mathematics extend it to more functions and to integration. Our calculus tutoring covers those next steps. Many 4MA1 calculus questions also need you to solve an inequality or a quadratic first; see our guide to quadratic inequality questions in Edexcel IGCSE. Because derivatives are rules applied to functions, our page on function notation and inverse functions in 4MA1 is good preparation. For every other section, use the 4MA1 Higher and Foundation content guide.
How Maths Bodhi helps
Calculus is usually the last 4MA1 topic taught, so it is often the least practised. In the free demo our tutor checks the power rule, negative powers and one turning-point question, then plans lessons around what is missing. Students in Gurgaon can choose one-to-one IGCSE maths home tuition, and others learn online.
Home tuition is available in Gurgaon (Gurugram). Students elsewhere in India and abroad learn with us online. You can book a free demo class.
Written and checked by the Maths Bodhi team. Facts checked against official Cambridge International and Pearson sources, November 2026.
Frequently asked questions
- Is differentiation in Edexcel IGCSE maths?
- Yes, on the Higher tier only. Section 3.4 Calculus covers differentiating integer powers of x, gradients, turning points and simple kinematics.
- Is integration in Edexcel IGCSE maths 4MA1?
- No. The 4MA1 calculus section covers differentiation only. Integration appears in Further Pure Mathematics 4PM1 and in A level.
- How do you find a turning point in IGCSE maths?
- Differentiate, set dy/dx equal to zero and solve for x. Then substitute each x value into the original equation to find the y-coordinates.
- Do I need the second derivative for 4MA1 maxima and minima?
- No. The specification says to distinguish between maxima and minima by considering the general shape of the graph. Checking the gradient either side is a useful confirmation.
- How is differentiation used in kinematics?
- Differentiate displacement s to get velocity v, and differentiate velocity to get acceleration a. A particle is at rest when v = 0.
- Can I differentiate 1/x in Edexcel IGCSE?
- Yes. Rewrite 1/x as x⁻¹ and use the power rule to get −x⁻², which is −1/x². The specification covers integer powers, including negative ones.
