To solve an Edexcel IGCSE quadratic inequality, rearrange it so one side is zero, find the roots of the quadratic, sketch the U-shaped curve through those roots, and read off where the curve is below or above the x-axis. For a positive x² term, "less than zero" gives one interval between the roots, and "greater than zero" gives two separate intervals outside them. This is 4MA1 Higher section 2.8A, which also asks you to show the solution set on a number line.
Most marks are lost not on the algebra but on the last step: writing one interval when there should be two, or the wrong way round. This guide shows how to avoid that, with five worked examples. Students who want a tutor to build the method with them can use our Edexcel IGCSE maths teachers.
What section 2.8 covers
| Statement | Tier | Content |
|---|---|---|
| 2.8A–C | Foundation | Symbols <, >, ≤, ≥; open and closed circles on a number line; solving linear inequalities |
| 2.8D–E | Foundation | Showing and identifying regions defined by simple linear inequalities |
| 2.8A | Higher | Solving quadratic inequalities in one unknown and showing the solution on a number line |
| 2.8B | Higher | Harder regions defined by linear inequalities |
Higher assumes the Foundation statements, so the number-line conventions apply: an open circle for < or > and a filled circle for ≤ or ≥.
The method in four steps
- Rearrange so the right-hand side is 0 and the x² term is positive.
- Find the roots of the quadratic by factorising, the formula or completing the square.
- Sketch a U-shaped curve crossing the x-axis at the roots. It does not need to be accurate.
- Read off the part you need: below the axis for < 0 or ≤ 0, above it for > 0 or ≥ 0.
For a positive x² term the pattern is always the same:
- (x − p)(x − q) < 0 gives p < x < q, one interval.
- (x − p)(x − q) > 0 gives x < p or x > q, two intervals.
Calculator or not?
4MA1 allows a calculator on both papers, but these questions are about method. When roots come from the quadratic formula, the calculator turns surds into decimals; keep the exact form if the question asks for it, and round only at the end. A quick check of a test value in the original inequality is a good use of the calculator.
Worked example 1: between the roots
Solve x² − 5x − 14 < 0. How many integers satisfy it?
Factorise: (x − 7)(x + 2) < 0. Roots: x = −2 and x = 7.
The U-shaped curve is below the axis between the roots, so −2 < x < 7.
Integers: −1, 0, 1, 2, 3, 4, 5, 6, which is 8 integers. The strict signs mean −2 and 7 themselves are excluded.
Worked example 2: outside the roots, with a non-unit x² term
Solve 2x² + x − 6 ≥ 0.
Factorise: (2x − 3)(x + 2) ≥ 0. Roots: x = 1.5 and x = −2.
The curve is above the axis outside the roots, and the "≥" includes the roots themselves:
x ≤ −2 or x ≥ 1.5.
On a number line, draw filled circles at −2 and 1.5 with arrows going outwards. Writing "−2 ≥ x ≥ 1.5" is wrong; no number can satisfy that. Two separate intervals need the word "or".
Worked example 3: a square on one side
Solve 9x² > 49.
Rearrange: 9x² − 49 > 0. This is a difference of two squares: (3x − 7)(3x + 7) > 0. Roots: x = 7/3 and x = −7/3.
Outside the roots: x < −7/3 or x > 7/3.
The common error here is to square-root both sides and write x > 7/3 only, losing the negative half.
Worked example 4: roots from the formula, then a second condition
(a) Solve x² − 4x − 7 ≤ 0, giving exact values. (b) Find the integers that satisfy both x² − 4x − 7 ≤ 0 and 3x − 2 > 4.
(a) The quadratic does not factorise. Completing the square: (x − 2)² − 11 ≤ 0, so the roots are x = 2 ± √11.
Between the roots: 2 − √11 ≤ x ≤ 2 + √11, which is about −1.32 ≤ x ≤ 5.32.
(b) The linear inequality gives 3x > 6, so x > 2. Combining with (a), x must be greater than 2 and no more than 5.32. So the integers are 3, 4 and 5.
The calculator helps here only to estimate 2 + √11 ≈ 5.32; the exact form is the answer to (a).
Worked example 5: a region from linear inequalities (Higher 2.8B)
Find all points with integer coordinates that satisfy x ≥ 1, y > x and x + y ≤ 6.
Work through x values:
- x = 1: y > 1 and y ≤ 5, so y = 2, 3, 4, 5.
- x = 2: y > 2 and y ≤ 4, so y = 3, 4.
- x = 3: y > 3 and y ≤ 3, which is impossible.
So the points are (1, 2), (1, 3), (1, 4), (1, 5), (2, 3) and (2, 4): six points. On a graph, y > x would be drawn as a dashed line because points on it are not included.
Common mistakes our tutors see
- Treating the inequality like an equation and writing x = −2 or x = 7 as the answer.
- One interval instead of two for a "greater than" inequality.
- Square-rooting both sides and losing the negative solution.
- Dividing by a negative without reversing the sign. Rearranging to keep the x² term positive avoids this.
- Wrong circles on the number line: open for strict, filled for inclusive.
- Skipping the sketch. It takes ten seconds and prevents most errors.
When to get help
- The student can factorise but cannot decide which side of the roots to choose.
- Inequalities with a negative x² term confuse them.
- Number-line diagrams are drawn with arrows the wrong way.
- Region questions are attempted without testing a point to check which side to shade.
Self-check
- Solve x² ≤ 36.
- Solve x² + 3x − 10 > 0.
- Solve x(x − 4) < 12.
- Find the integers that satisfy 2x² − 7x + 3 < 0.
- On a number line, should x ≥ 1.5 have an open or a filled circle?
Answers. 1: (x − 6)(x + 6) ≤ 0, so −6 ≤ x ≤ 6. 2: (x + 5)(x − 2) > 0, so x < −5 or x > 2. 3: x² − 4x − 12 < 0, (x − 6)(x + 2) < 0, so −2 < x < 6. 4: (2x − 1)(x − 3) < 0 gives 0.5 < x < 3, so the integers are 1 and 2. 5: Filled, because 1.5 is included.
Where it leads
Quadratic inequalities return in Further Pure Mathematics 4PM1 under identities and inequalities, in Cambridge Additional Mathematics 0606, and in IB and A level work on the discriminant, where you solve an inequality in k to decide how many roots an equation has. In 4MA1 itself they appear inside other topics, such as finding when a sum of an arithmetic series exceeds a target; our guide to sequences and arithmetic series in Edexcel IGCSE has an example. Calculus questions often hide one too, as in our guide on differentiating and finding turning points. The next topic on the specification list is vectors, explained in our walkthrough of 4MA1 vectors and transformation geometry. For context, see the complete 4MA1 topic list.
How Maths Bodhi helps
Our tutors set one "less than" and one "greater than" inequality in the free demo, which shows at once whether the sketch step is secure. Lessons then add formula roots, combined conditions and regions, with written method checked on exam-style questions. For students who want the algebra to go further, our algebra tutoring page shows how sessions build.
Home tuition is available in Gurgaon (Gurugram). Students elsewhere in India and abroad learn with us online. You can book a free demo class.
Written and checked by the Maths Bodhi team. Facts checked against official Cambridge International and Pearson sources, November 2026.
Frequently asked questions
- How do you solve quadratic inequalities in IGCSE maths?
- Rearrange so one side is zero, find the roots, sketch the U-shaped curve and read off where it is below the axis (for less than) or above it (for greater than).
- Are quadratic inequalities on the Edexcel IGCSE Foundation paper?
- No. Solving quadratic inequalities is a Higher statement in section 2.8 of 4MA1. Foundation covers linear inequalities and simple regions.
- Why does a quadratic inequality sometimes have two answers?
- For a positive x² term, "greater than zero" means the curve is above the axis on both sides of the roots, so the solution is two intervals joined by "or".
- How do you show a quadratic inequality on a number line?
- Mark the roots, use open circles for < or > and filled circles for ≤ or ≥, then shade between the roots or outwards from them.
- What if a quadratic inequality does not factorise?
- Find the roots with the quadratic formula or by completing the square, then use the same sketch method. Give exact values if the question asks for them.
- Can I divide both sides of an inequality by a negative number?
- Yes, but the inequality sign must be reversed. Rearranging so that the x² term is positive avoids the problem.
