Edexcel IGCSE vectors questions come from section 5.1 of 4MA1, which is Higher only: column vectors, multiplying by a scalar, adding and subtracting, the magnitude of a vector, resultants, and simple geometric proofs. Section 5.2, transformation geometry, is on both tiers: rotations, reflections, translations and enlargements, including giving a complete description of a transformation. Together they make up heading 5 of the specification, "Vectors and transformation geometry".
Both topics reward precise language. A vector proof needs a clear final statement, and a transformation description needs every detail, such as the centre and the direction of a rotation. This guide works through both with four examples. Our Edexcel IGCSE maths specialists teach the topic one-to-one if you need it.
What heading 5 covers
| Section | Tier | Content |
|---|---|---|
| 5.1 A–G | Higher only | Magnitude and direction; notation such as OA (with an arrow) and bold a; scalar multiples; adding and subtracting; modulus; resultants; simple vector proofs |
| 5.2 A–M | Foundation and Higher | Rotation (centre and angle, anticlockwise positive), reflection (mirror line), translation (column vector), enlargement (centre and positive scale factor, including fractions); congruence under rotation, reflection and translation; complete descriptions |
Two points are easy to miss. First, enlargements in 4MA1 use positive scale factors only, including fractions; negative scale factors are not in the specification. Second, an anticlockwise rotation is a positive angle and a clockwise rotation is negative, which matters if a question gives "−90°".
In this article, a column vector is written across the line as (3, −4) because of the page format. In the exam, write it vertically, with 3 above −4.
The vector toolkit
- Adding and subtracting: add or subtract the components: (3, −4) + (−1, 2) = (2, −2).
- Scalar multiples: 2a doubles each component and keeps the direction; −a reverses it.
- Magnitude: |(x, y)| = √(x² + y²).
- Routes: AB = AO + OB = −a + b = b − a, where OA = a and OB = b.
- Parallel vectors are scalar multiples of each other. Collinear points share a vector route and a point.
Calculator or not?
A calculator is allowed on both 4MA1 papers. In vectors, it helps only with magnitudes, such as √277. Vector proofs are pure algebra and need every step written. Transformation questions need a ruler, a pencil and sometimes tracing paper, which Pearson allows.
Worked example 1: combining and measuring vectors (Higher)
a = (3, −4) and b = (−1, 2). Find (a) 2a − 3b, (b) |a| and (c) |2a − 3b|, to 3 significant figures.
(a) 2a = (6, −8) and 3b = (−3, 6). So 2a − 3b = (6 − (−3), −8 − 6) = (9, −14).
(b) |a| = √(3² + (−4)²) = √25 = 5.
(c) |2a − 3b| = √(9² + (−14)²) = √(81 + 196) = √277 = 16.6 (3 s.f.).
Subtracting a negative is the usual slip in (a): 6 − (−3) is 9, not 3.
Worked example 2: a vector proof (Higher)
OAB is a triangle with OA = a and OB = b. P is the point on AB such that AP : PB = 1 : 2. The point R is such that OR = 2a + b. Show that O, P and R lie on a straight line.
Find OP by a route through A:
- AB = AO + OB = b − a
- AP = ⅓AB = ⅓(b − a), because AP is one part out of three
- OP = OA + AP = a + ⅓b − ⅓a = ⅔a + ⅓b
Now compare with OR: 3 × OP = 2a + b = OR.
So OR is a scalar multiple of OP, which means the two vectors are parallel. They also share the point O, so O, P and R are collinear, with OR three times as long as OP.
The final sentence earns its own mark. "Parallel" alone is not enough; you must say they share a point.
Worked example 3: describing a rotation (both tiers)
Triangle T has vertices (1, 1), (3, 1) and (1, 2). Triangle U has vertices (−1, 1), (−1, 3) and (−2, 1). Describe fully the single transformation that maps T onto U.
The shape has the same size and is turned, so it is a rotation. Test a rule: a rotation of 90° anticlockwise about the origin sends (x, y) to (−y, x).
- (1, 1) → (−1, 1) ✓
- (3, 1) → (−1, 3) ✓
- (1, 2) → (−2, 1) ✓
Rotation, 90° anticlockwise, about (0, 0).
A full description of a rotation needs three things: the word rotation, the angle with its direction, and the centre. Missing any one usually loses a mark. Tracing paper is the quickest way to find a centre that is not obvious.
Worked example 4: an enlargement with a fractional scale factor (both tiers)
Triangle P has vertices (6, 4), (10, 4) and (6, 8). Enlarge P by scale factor ½ with centre (2, 0). Then compare the areas.
For each vertex, find the vector from the centre, halve it, and add it back to the centre:
- (6, 4): vector (4, 4) → (2, 2) → image (4, 2)
- (10, 4): vector (8, 4) → (4, 2) → image (6, 2)
- (6, 8): vector (4, 8) → (2, 4) → image (4, 4)
Lengths are halved, so the area is multiplied by (½)² = ¼. The original area is ½ × 4 × 4 = 8 square units, so the image has area 2 square units.
A fractional scale factor makes the shape smaller and moves it towards the centre. It is still called an enlargement.
Common mistakes our tutors see
- Writing AB as a − b instead of b − a. Go from A back to O, then out to B.
- Forgetting the shared point when proving that points are collinear.
- Incomplete descriptions, such as "rotation 90°" with no direction or centre.
- Describing two transformations when the question asks for a single one.
- Using the origin as the centre of enlargement when the question gives another centre.
- Adding magnitudes: |a + b| is not |a| + |b| in general.
When to get help
- The student gets lost choosing a route through a vector diagram.
- Ratio points such as "AP : PB = 1 : 2" are placed at the wrong fraction.
- Transformation descriptions lose marks even when the shape is drawn correctly.
- Rotations about a point other than the origin cannot be found.
Self-check
- Find the magnitude of (7, 24).
- p = (2, 5) and q = (−1, 3). Find p − 2q.
- The point (4, 1) is reflected in the line y = x. Where does it go?
- Translate (2, −1) by the vector (−4, 3).
- A shape of area 5 cm² is enlarged by scale factor 3. Find the new area.
Answers. 1: √(49 + 576) = 25. 2: (2 + 2, 5 − 6) = (4, −1). 3: (1, 4). 4: (−2, 2). 5: 5 × 3² = 45 cm².
Where it leads
Vectors grow a lot after 4MA1. Further Pure Mathematics 4PM1 has a topic on scalar and vector quantities, Cambridge Additional Mathematics 0606 covers vectors in two dimensions, and IB Analysis and Approaches HL and A level Mathematics take them into three dimensions. Our IB AA HL tutoring covers that later stage. Within 4MA1, the related graph transformations, such as y = f(x + a), sit in section 3.3 alongside function notation. Before tackling the practice sets, it helps to have covered quadratic inequality methods and the guide to arithmetic sequences, nth terms and sums. Calculus is in our 4MA1 differentiation guide, and every section is listed in the Edexcel IGCSE 4MA1 specification guide.
How Maths Bodhi helps
In the free demo our tutor sets one vector route and one transformation description. Those two short tasks show whether the gap is in notation, in the algebra or in the precise wording examiners expect. Lessons then build up to full proofs, marked for method. Online students anywhere can join our IGCSE maths online classes.
Home tuition is available in Gurgaon (Gurugram). Students elsewhere in India and abroad learn with us online. You can book a free demo class.
Written and checked by the Maths Bodhi team. Facts checked against official Cambridge International and Pearson sources, November 2026.
Frequently asked questions
- Are vectors on the Edexcel IGCSE Foundation paper?
- No. Section 5.1 Vectors is Higher tier only in 4MA1. Foundation students meet column vectors only in translations, under transformation geometry.
- How do you prove points are collinear with vectors?
- Show that one vector is a scalar multiple of another, so they are parallel, and that they share a point. State both facts in a final sentence.
- How do you find the magnitude of a vector?
- For a column vector with components x and y, the magnitude is √(x² + y²). For example, the magnitude of (3, −4) is 5.
- What do you need to describe a rotation fully?
- The word rotation, the angle, the direction (clockwise or anticlockwise) and the centre of rotation.
- Are negative scale factors in Edexcel IGCSE maths?
- No. The 4MA1 specification says enlargements use a positive scale factor only, including fractions.
- What is the difference between a vector and a translation?
- A translation is a transformation that moves every point by the same amount, and it is described by a column vector. A vector is a quantity with size and direction that can describe many things, including that movement.
