WhatsApp us
IGCSE Maths18 Nov 2026

IGCSE Vectors Questions: 11 Practice Questions on Vectors and Transformations with Answers

Eleven original IGCSE 0580 questions on transformations and vectors, from translations and describing rotations to magnitude, collinearity and ratio proofs, with full worked solutions and marking notes.

IGCSE Vectors Questions: 11 Practice Questions on Vectors and Transformations with Answers

Vectors questions in IGCSE maths look abstract, but they follow a small number of patterns: write a route, simplify it, then compare it with another route. Transformations questions are even more predictable, because "describe fully" always needs the same pieces of information. This set gives you eleven original questions in the style of Cambridge 0580: six on transformations and five on vectors, ending with two vector geometry proofs.

In 0580, transformations (E7.1) are at both tiers, but vectors in two dimensions, magnitude and vector geometry (E7.2 to E7.4) are Extended only, so Core has no vectors at all. Nearly everything here can be done without a calculator. If vector proofs are where you stall, a Cambridge 0580 maths tutor can show you the route-finding habit in one demo.

Notation on this page. Column vectors are written across the line as (x, y), since the page cannot stack them. Vectors are shown in bold, such as a, and |a| means the magnitude of a.

Transformations

Q1. The point (4, −1) is translated by the vector (−6, 3). Find its image. [1]

Add the vector: (4 − 6, −1 + 3) = (−2, 2).

Marking: B1.

Q2. Find the image of (a) (2, 5) after reflection in the line y = x, (b) (7, 1) after reflection in the line x = 3. [2]

(a) Reflection in y = x swaps the coordinates: (5, 2).

(b) (7, 1) is 4 units to the right of x = 3, so its image is 4 units to the left: (−1, 1).

Marking: B1 each.

Q3. Triangle T has vertices (1, 1), (3, 1) and (1, 2). Its image has vertices (−1, 1), (−1, 3) and (−2, 1). Describe fully the single transformation that maps T onto its image. [3]

Each point (x, y) has gone to (−y, x), which is the effect of a quarter turn anticlockwise about the origin. Check: (3, 1) goes to (−1, 3).

Rotation, 90° anticlockwise, centre (0, 0).

Marking: B1 for "rotation"; B1 for the angle and direction; B1 for the centre. Three pieces of information, three marks. Using two transformations (such as "a reflection and a translation") earns nothing when the question asks for a single one.

Q4. Find the image of (6, 9) after an enlargement with scale factor −½ and centre (2, 1). [2]

From the centre to the point: (6 − 2, 9 − 1) = (4, 8). Multiply by −½: (−2, −4). Add to the centre: (2 − 2, 1 − 4) = (0, −3).

Marking: M1 for multiplying the vector from the centre by −½; A1. A negative scale factor puts the image on the opposite side of the centre.

Q5. An enlargement maps A(2, 3) to A′(5, 9) and B(4, 3) to B′(11, 9). Find the scale factor and the centre of enlargement. [3]

AB has length 2 and A′B′ has length 6, so the scale factor is 3. For the centre P: P + 3(A − P) = A′, so 3A − 2P = A′ and P = (3A − A′)/2 = ((6 − 5)/2, (9 − 9)/2) = (0.5, 0).

Check with B: (0.5, 0) + 3 × (3.5, 3) = (11, 9). Correct.

Marking: B1 for the scale factor; M1 for a valid method for the centre (drawing lines through corresponding points works on a grid); A1.

Q6. A shape is reflected in the x-axis and then rotated 90° clockwise about the origin. Describe the single transformation that has the same effect. [3]

Track a general point. Reflect in the x-axis: (x, y) goes to (x, −y). Rotate 90° clockwise: (p, q) goes to (q, −p), so (x, −y) goes to (−y, −x). Check with (2, 5): it ends at (−5, −2).

Swapping the coordinates and changing both signs is a reflection in the line y = −x.

Marking: M1 for following a point through both steps; A1 for "reflection"; A1 for y = −x.

Vectors (Extended only)

Q7. a = (3, −2) and b = (−1, 4). Find (a) 2a − 3b, (b) |a + b|. [4]

(a) 2a = (6, −4) and 3b = (−3, 12). 2a − 3b = (6 + 3, −4 − 12) = (9, −16).

(b) a + b = (2, 2). |a + b| = √(2² + 2²) = √8 = 2√2, or 2.83 to 3 significant figures.

Marking: B1 for each component in (a); M1 A1 for the magnitude.

Q8. P is the point (2, 3) and the vector PQ = (−5, 12). Find (a) |PQ|, (b) the coordinates of Q. [2]

(a) √((−5)² + 12²) = √169 = 13.

(b) Q = (2 − 5, 3 + 12) = (−3, 15).

Marking: B1 each.

Q9. Find the scalars k and m such that k(2, 1) + m(1, −3) = (7, −7). [3]

Compare components: 2k + m = 7 and k − 3m = −7. From the first, m = 7 − 2k. Substitute: k − 21 + 6k = −7, so 7k = 14, k = 2 and m = 3.

Marking: M1 for two equations; M1 for solving; A1. Check: 2(2, 1) + 3(1, −3) = (4 + 3, 2 − 9) = (7, −7).

Q10. O is the origin, OA = a and OB = b. P lies on AB with AP : PB = 1 : 2. (a) Find AB. (b) Find OP in terms of a and b. (c) OQ = 2a + b. Show that O, P and Q lie on a straight line. [5]

(a) AB = AO + OB = −a + b, or b − a.

(b) AP is one third of AB: OP = OA + AP = a + ⅓(b − a) = ⅔a + ⅓b.

(c) OQ = 2a + b = 3(⅔a + ⅓b) = 3 OP. OQ is a multiple of OP, so the two vectors are parallel, and they share the point O. Therefore O, P and Q are collinear.

Marking: B1 for (a); M1 A1 for (b); M1 for showing OQ = 3 OP; A1 for a conclusion that mentions both "parallel" and "common point".

Q11. OABC is a parallelogram with OA = a and OC = c. M is the midpoint of BC. N lies on OB with ON : NB = 2 : 1. Show that A, N and M are collinear and find AN : NM. [5]

OB = a + c, so ON = ⅔(a + c).

AN = AO + ON = −a + ⅔a + ⅔c = −⅓a + ⅔c.

CB = OA = a, so CM = ½a and OM = c + ½a. Then AM = −a + c + ½a = c − ½a.

Now AN = ⅔(c − ½a) = ⅔ AM. AN is a multiple of AM and they share A, so A, N and M are collinear, and AN : NM = 2 : 1.

Marking: B1 for ON; M1 for AN; M1 for AM; A1 for the collinearity statement; B1 for the ratio. Write every vector as a route between known points before you simplify: that is the habit that unlocks these proofs.

Answers at a glance

(−2, 2) · (5, 2) and (−1, 1) · rotation 90° anticlockwise about (0, 0) · (0, −3) · scale factor 3, centre (0.5, 0) · reflection in y = −x · (9, −16) and 2√2 · 13 and (−3, 15) · k = 2, m = 3 · ⅔a + ⅓b · AN : NM = 2 : 1.

Mistakes we see in this topic

  • "Describe fully" answers missing the centre, the direction or the line of reflection.
  • Using clockwise when the turn is anticlockwise. Use tracing paper, which you can ask for in the exam.
  • Treating −a + b as a − b.
  • Saying "parallel" without the shared point when proving collinearity.
  • Adding magnitudes instead of finding the magnitude of the sum.

For method and more examples, see our guides to describing transformations fully, column vectors and magnitude and vector geometry proofs. The strand overview, transformations and vectors in 0580, lists each syllabus heading.

If bearings and distances suit you, compare this set with the trigonometry questions. For something quite different, the probability practice set is next in the series. Students taking Additional Maths will extend these ideas in 0606 vectors.

Send us the questions you got wrong

Photograph your working, especially any vector proof that stalled halfway, and send it on WhatsApp (use the WhatsApp button on this page). Or bring it to a free demo class, where the tutor will finish the proof with you from the line you reached.

How Maths Bodhi helps

  • A free demo that checks transformations and vector routes from your own working.
  • A tutor matched to your code and tier.
  • Proof-style questions practised until the routes become automatic, with written method checked.
  • Live online IGCSE maths tutoring for students anywhere, and home lessons in Gurgaon.

Home tuition is available in Gurgaon (Gurugram). Students elsewhere in India and abroad learn with us online. You can book a free demo class.

Written and checked by the Maths Bodhi team. Facts checked against official Cambridge International and Pearson sources, November 2026.

Frequently asked questions

Are vectors in IGCSE Core maths?
No. In Cambridge 0580, vectors in two dimensions, magnitude and vector geometry are Extended only, so Core has no vectors. Transformations are at both tiers.
What do I need to describe a rotation fully?
State that it is a rotation, give the angle with its direction (clockwise or anticlockwise) and give the centre of rotation.
How do I show that three points are collinear using vectors?
Show that one vector is a multiple of another, so they are parallel, and state that they share a common point.
How do I find the magnitude of a vector?
For a column vector (x, y), the magnitude is √(x² + y²).
Can I use tracing paper in IGCSE maths?
Cambridge allows tracing paper for all four 0580 papers, but candidates cannot bring their own. You can ask for it during the exam.
Are these questions from Cambridge past papers?
No. They are original questions written by the Maths Bodhi team in an exam style.
IGCSE vectors practiceIGCSE transformations questionsvector geometry IGCSE0580 vectorsIGCSE maths tutor

Related guides

Keep exploring this maths topic

IGCSE Maths18 Nov 2026

Edexcel IGCSE Vectors and Transformations: Vector Proofs, Magnitude and Describing Transformations (4MA1)

Heading 5 of 4MA1: vectors (Higher only) and transformation geometry (both tiers). Column vectors, magnitude, vector geometry proofs, and full descriptions of rotations, reflections, translations and enlargements, with four worked examples.

Edexcel IGCSE vectors4MA1 transformationsvector geometry proofsdescribing transformations IGCSE

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Transformations (0580 E7.1): How to Describe a Transformation Fully, With Worked Examples

Reflection, rotation, enlargement and translation for Cambridge IGCSE 0580 (C7.1 and E7.1): the details a full description needs, how to find a centre of rotation or enlargement, negative scale factors and combined transformations, with four worked examples and a self-check.

IGCSE transformationsdescribe fully transformationnegative scale factor enlargement0580 E7.1

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Vector Geometry (0580 E7.4): Midpoints, Ratios, Parallel Lines and Collinear Points

Vector geometry for Cambridge IGCSE 0580 Extended (E7.4): writing routes in terms of a and b, position vectors, points that divide a line in a ratio, and how to prove lines parallel or points collinear, with the sentences that earn the final mark. Four worked examples and a self-check.

IGCSE vector geometrycollinear vectors proofvectors ratio questions0580 E7.4

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Maths Transformations and Vectors Topics (0580 E7): What Core and Extended Students Need

The four sub-topics of Cambridge IGCSE 0580 topic 7, Transformations and vectors, with their syllabus references, exactly where Core stops and Extended carries on, what changed in 2025, how the strand is examined on the non-calculator and calculator papers, and a study order.

IGCSE vectorsIGCSE transformations0580 E7IGCSE Extended maths

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Additional Maths Vectors Questions (0606): Position Vectors, Geometry and Velocity

Nine original 0606-style vector questions in rising difficulty, with worked answers and mark notes: magnitude and unit vectors, position vectors and ratios, equating like vectors, a vector geometry intersection, position from a velocity vector, collision, a river crossing and closest approach.

0606 vectors practiceposition vectors questionsvelocity vectorsvector geometry 0606

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Differentiation Questions: 11 Practice Questions on Gradients, Tangents and Stationary Points

Eleven original IGCSE 0580 Extended differentiation questions in four stages, from differentiating powers of x to stationary points, maximum and minimum tests and simple context problems, each with a full solution and marking notes.

IGCSE differentiation practiceIGCSE stationary points questionsdy/dx questions IGCSE0580 Extended calculus

By Maths Bodhi Team

Read guide