WhatsApp us
IGCSE Maths18 Nov 2026

IGCSE Vector Geometry (0580 E7.4): Midpoints, Ratios, Parallel Lines and Collinear Points

Vector geometry for Cambridge IGCSE 0580 Extended (E7.4): writing routes in terms of a and b, position vectors, points that divide a line in a ratio, and how to prove lines parallel or points collinear, with the sentences that earn the final mark. Four worked examples and a self-check.

IGCSE Vector Geometry (0580 E7.4): Midpoints, Ratios, Parallel Lines and Collinear Points

Vector geometry in IGCSE maths means using two base vectors, usually a and b, to describe every line in a diagram, and then using that algebra to prove facts about the shape: that two lines are parallel, that three points lie on a straight line, or where a point divides a line. Cambridge IGCSE Mathematics 0580 lists it as E7.4, and it is Extended content only. The syllabus names four skills: represent vectors by directed line segments, use position vectors, express vectors in terms of two coplanar vectors, and use vectors to reason and solve geometric problems, including parallel vectors, collinear points, ratio and similarity.

These questions carry several marks each and often sit near the end of a paper. They look hard, but they follow a small number of patterns. This guide sets out those patterns, with four worked examples. For one-to-one help with the harder Extended questions, see our one-to-one Cambridge IGCSE maths lessons.

The one idea behind every question: routes

To find any vector, travel from its start to its end along lines you already know.

  • Going with a known vector adds it; going against it subtracts it.
  • Any route gives the same answer, so pick the simplest.

If OA = a and OB = b, then the vector from A to B goes A → O → B:

AB = AO + OB = −a + b = b − a

Write it as b − a, not a − b. That single line is the start of almost every E7.4 question. The column vector arithmetic it relies on is in our column vector arithmetic guide, and the place of E7.4 in the whole strand is on our IGCSE vectors topic map.

Position vectors

The position vector of a point P is the vector OP from the origin O. If A has position vector a and B has position vector b, then AB = b − a. With coordinates, the position vector of (3, 5) is the column vector with 3 on top and 5 below, so position vectors connect vector geometry to coordinate geometry.

Splitting a line in a ratio

If P lies on AB with AP : PB = m : n, then AP is m/(m + n) of AB. So:

OP = OA + AP = a + (m/(m + n))(b − a)

Do not memorise a formula; use the route and the fraction each time. It is the same reasoning as sharing in a ratio, covered in our ratio and proportion guide.

How to write the proof sentences

Most marks in E7.4 are for the algebra, but the last mark is often for the conclusion. Use these forms.

To showShow thisFinal sentence
PQ is parallel to RSPQ = k × RS for a number k"PQ is a multiple of RS, so PQ is parallel to RS."
A, B and C are collinearAC = k × AB (a multiple, and they share point A)"AC is a multiple of AB and they share the point A, so A, B and C lie on a straight line."
A ratio of lengthsAC = k × AB"AC = 3AB, so AB : BC = 1 : 2."

Parallel alone is not enough for collinear. Two parallel lines can be separate; you must also say they share a point.

Non-calculator and calculator handling

There is no calculator work in vector geometry: it is algebra with fractions. That makes it ideal for Paper 2, and students who rely on a calculator for fractions find it harder there. When it appears on Paper 4, the method is identical. Keep fractions exact, such as (3/5)a + (2/5)b, throughout.

Worked example 1: a midpoint

OA = a and OB = b. M is the midpoint of AB. Find OM in terms of a and b.

AB = b − a. M is halfway, so AM = ½(b − a).

OM = OA + AM = a + ½(b − a) = a + ½b − ½a = ½a + ½b

You can also write this as ½(a + b). It says that M is the "average" of A and B, which matches the midpoint rule for coordinates.

Worked example 2: a point dividing a line in a ratio

OA = a and OB = b. P lies on AB with AP : PB = 2 : 3. Find OP in terms of a and b, in its simplest form.

There are 2 + 3 = 5 parts, so AP = (2/5)AB = (2/5)(b − a).

OP = a + (2/5)(b − a) = a + (2/5)b − (2/5)a = (3/5)a + (2/5)b

Check: the coefficients add to 1, which is always true for a point on the line AB. If yours do not, recheck the route.

Worked example 3: proving three points are collinear

OA = a and OB = b. The point C has OC = 3b − 2a. Show that A, B and C lie on a straight line, and find the ratio AB : BC.

AB = b − a

AC = OC − OA = (3b − 2a) − a = 3b − 3a = 3(b − a)

So AC = 3AB. AC is a multiple of AB, and the two vectors share the point A, so A, B and C lie on a straight line.

For the ratio: BC = AC − AB = 3(b − a) − (b − a) = 2(b − a) = 2AB.

AB : BC = 1 : 2

Taking out the common factor, here 3(b − a), is the step that makes the multiple visible. Practise factorising vector expressions until you do it without thinking.

Worked example 4: find k, with similarity

In triangle OAB, OA = a and OB = b. X lies on OA with OX : XA = 1 : 2. Y lies on AB with AY = k × AB. (a) Find XY in terms of a, b and k. (b) XY is parallel to OB. Find k, and describe what this tells you about triangles AXY and AOB.

(a) OX is a third of OA, so XA = ⅔a. Then go from X to A, and from A towards B:

XY = XA + AY = ⅔a + k(b − a) = (⅔ − k)a + kb

(b) If XY is parallel to OB, it must be a multiple of b alone, so the coefficient of a is zero:

⅔ − k = 0, so k = ⅔

Then XY = ⅔b, so XY is parallel to OB and two thirds of its length. Since AX = ⅔ × AO as well, triangle AXY is similar to triangle AOB with scale factor ⅔, and AY : YB = 2 : 1.

This is the "ratio and similarity" style of question the syllabus mentions. Setting a coefficient to zero, or matching coefficients of a and b, is the key move. The link to shapes is explained in our similar shapes guide.

Common mistakes our tutors see

  1. AB written as a − b. Always end minus start: b − a.
  2. Going against a vector without a minus sign, such as writing BO as b.
  3. Wrong fraction for a ratio: using 2/3 instead of 2/5 for AP : PB = 2 : 3.
  4. Not simplifying. Leaving a + (2/5)(b − a) unexpanded can lose the final mark when "simplest form" is asked.
  5. Collinear proof without "common point".
  6. No conclusion at all: correct algebra, then nothing, so the reasoning mark is lost.
  7. Mixing up AY = k AB with AY = k YB, which changes every fraction afterwards.

When to get help with vector geometry

  • Your child is comfortable with column vectors but loses their way once the diagram has letters.
  • They can find OM or OP but cannot start a "show that" question.
  • Proofs are correct but marked down for missing sentences.
  • They skip vector geometry in past papers because "it always goes wrong".

E7.4 rewards a method more than insight, so it is one of the most teachable parts of the Extended course.

Self-check

  1. OABC is a parallelogram with OA = a and OC = c. Find OB and AC in terms of a and c.
  2. OA = a and OB = b. M is the midpoint of OA and N is the midpoint of OB. Show that MN is parallel to AB.
  3. A is the point (1, 2) and B is the point (7, 5). P lies on AB with AP : PB = 1 : 2. Find the coordinates of P.
  4. OP = a + 2b and OQ = 3a + 6b. Show that O, P and Q are collinear.
  5. XY = (1 − k)a + 2kb and XY is parallel to a + b. Find k.

Answers. 1: OB = a + c, AC = c − a. 2: MN = ½b − ½a = ½(b − a) = ½AB, so MN is parallel to AB (and half its length). 3: AB = (6, 3), so OP = (1, 2) + ⅓(6, 3) = (3, 3). 4: OQ = 3(a + 2b) = 3OP, and both start at O, so O, P and Q are collinear. 5: The coefficients must be equal: 1 − k = 2k, so k = ⅓.

Where vector geometry leads

Vector reasoning carries straight into IGCSE Additional Mathematics, where "equating like vectors" and vector geometry with harder diagrams are both listed; our 0606 vectors practice is a good test of readiness. At IB HL, the same thinking extends to three dimensions. Before that, consolidate this sub-topic with the vector questions in our IGCSE vectors and transformations practice, and if transformations still need work, the transformations walk-through covers E7.1.

How Maths Bodhi helps

Our tutors teach vector geometry as a short list of moves: route, ratio fraction, factorise, conclude. In a free demo class, the student attempts one collinear proof and one ratio question while the tutor notes where the method breaks. For regular sessions aimed at the Extended papers, see our IGCSE maths home tuition and online lessons.

Home tuition is available in Gurgaon (Gurugram). Students elsewhere in India and abroad learn with us online. You can book a free demo class.

Written and checked by the Maths Bodhi team. Facts checked against official Cambridge International and Pearson sources, November 2026.

Frequently asked questions

How do you prove points are collinear with vectors in IGCSE?
Show that one vector is a multiple of the other, such as AC = 3AB, and state that they share a common point. Then the three points lie on a straight line.
How do you show two vectors are parallel?
Show that one is a number multiple of the other. For example, if PQ = 2(b − a) and AB = b − a, then PQ = 2AB, so PQ is parallel to AB.
Is vector geometry in IGCSE Core maths?
No. Vector geometry is E7.4, which is Extended content only in the 0580 syllabus.
How do you find a vector that divides a line in a ratio?
Go to the start of the line, then add the right fraction of the line. For AP : PB = 2 : 3, OP = OA + (2/5)AB.
Why is AB equal to b − a?
Travel from A back to O (−a) and then from O to B (+b). So AB = −a + b, which is written b − a.
Do I need a calculator for IGCSE vector questions?
No. Vector geometry is algebra with fractions, which is why it suits the non-calculator Paper 2 as well as Paper 4.
IGCSE vector geometrycollinear vectors proofvectors ratio questions0580 E7.4IGCSE maths tutor

Related guides

Keep exploring this maths topic

IGCSE Maths18 Nov 2026

IGCSE Vectors Questions: 11 Practice Questions on Vectors and Transformations with Answers

Eleven original IGCSE 0580 questions on transformations and vectors, from translations and describing rotations to magnitude, collinearity and ratio proofs, with full worked solutions and marking notes.

IGCSE vectors practiceIGCSE transformations questionsvector geometry IGCSE0580 vectors

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Maths Transformations and Vectors Topics (0580 E7): What Core and Extended Students Need

The four sub-topics of Cambridge IGCSE 0580 topic 7, Transformations and vectors, with their syllabus references, exactly where Core stops and Extended carries on, what changed in 2025, how the strand is examined on the non-calculator and calculator papers, and a study order.

IGCSE vectorsIGCSE transformations0580 E7IGCSE Extended maths

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Further Pure Maths Vectors (4PM1 Section 7): i and j, Position Vectors, Ratio and Vector Geometry

Section 7 of Edexcel Further Pure Mathematics (4PM1), "Scalar and vector quantities": i and j components, magnitude and unit vectors, position vectors, the point dividing AB in a ratio, and vector proofs of collinearity and intersection. Four worked examples and a self-check.

further pure vectors4PM1 vectorsposition vectors IGCSEvector geometry proofs

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

Edexcel IGCSE Vectors and Transformations: Vector Proofs, Magnitude and Describing Transformations (4MA1)

Heading 5 of 4MA1: vectors (Higher only) and transformation geometry (both tiers). Column vectors, magnitude, vector geometry proofs, and full descriptions of rotations, reflections, translations and enlargements, with four worked examples.

Edexcel IGCSE vectors4MA1 transformationsvector geometry proofsdescribing transformations IGCSE

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

Hardest IGCSE Maths Questions: 9 Extended Problems With Full Solutions

Nine original multi-step problems of the kind that decide A and A* grades in Cambridge IGCSE 0580 Extended, from bounds of a division to vector proofs, each with a full solution and notes on why students get stuck.

hardest IGCSE maths questionsIGCSE Extended hard questions0580 A* practiceIGCSE problem solving

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Additional Maths Vectors Questions (0606): Position Vectors, Geometry and Velocity

Nine original 0606-style vector questions in rising difficulty, with worked answers and mark notes: magnitude and unit vectors, position vectors and ratios, equating like vectors, a vector geometry intersection, position from a velocity vector, collision, a river crossing and closest approach.

0606 vectors practiceposition vectors questionsvelocity vectorsvector geometry 0606

By Maths Bodhi Team

Read guide