WhatsApp us
IGCSE Maths18 Nov 2026

IGCSE Further Pure Maths Vectors (4PM1 Section 7): i and j, Position Vectors, Ratio and Vector Geometry

Section 7 of Edexcel Further Pure Mathematics (4PM1), "Scalar and vector quantities": i and j components, magnitude and unit vectors, position vectors, the point dividing AB in a ratio, and vector proofs of collinearity and intersection. Four worked examples and a self-check.

IGCSE Further Pure Maths Vectors (4PM1 Section 7): i and j, Position Vectors, Ratio and Vector Geometry

Vectors in Edexcel International GCSE Further Pure Mathematics (4PM1) sit in Section 7, "Scalar and vector quantities". Compared with 4MA1, the new parts are working in i and j components, finding unit vectors, using the position vector of a point that divides a line in a ratio m : n, and the key fact for proofs: if α₁a + β₁b = α₂a + β₂b and a and b are not parallel, then α₁ = α₂ and β₁ = β₂. That last fact is how you find where two lines in a triangle meet.

If vector proofs are where your child's marks disappear, 4PM1 tutoring with a matched tutor is a good way to rebuild the method one diagram at a time.

What Section 7 lists

Spec pointSkill
7AAdd and subtract coplanar vectors; multiply by a scalar; equate coefficients of non-parallel a and b
7BComponents and resolved parts, using i and j
7CMagnitude of a vector
7DPosition vectors: AB = OB − OA = b − a
7EUnit vectors
7FSimple geometric properties: collinearity, parallel lines, concurrency, and the point dividing AB in the ratio m : n

Tier. 4PM1 is single tier, aimed at grades 9–4 with 3 allowed, so there is no Core or Extended split; everyone needs all six points. The 4PM1 Further Pure pillar guide lists the other nine sections.

Formulae. Nothing from this section is printed on the 4PM1 formulae sheet. You need the magnitude formula, the unit vector idea and the ratio formula from memory.

Calculator use. Calculators are allowed on both papers. Magnitudes such as √277 are fine as decimals unless an exact answer is asked for, but vector proofs are algebra, and the calculator cannot help there.

The toolkit

  • Magnitude: |pi + qj| = √(p² + q²).
  • Unit vector in the direction of v: v / |v|.
  • Resolving: a vector of magnitude R at angle θ to i is R cos θ i + R sin θ j.
  • Position vector: the position vector of A is OA = a, and AB = b − a.
  • Ratio: if P divides AB in the ratio m : n, then p = (na + mb)/(m + n).
  • Parallel: u is parallel to v if u = kv for some scalar k.
  • Collinear: A, B, C are collinear if AB is parallel to BC and they share the point B.

Worked example 1: components, magnitude, unit vector

a = 3i − 4j and b = −i + 2j. Find (a) 2a − 3b, (b) |2a − 3b|, (c) the unit vector in the direction of a.

(a) 2a − 3b = (6i − 8j) − (−3i + 6j) = 9i − 14j. Watch the double negative on the i term.

(b) |9i − 14j| = √(81 + 196) = √277 = 16.6 (3 s.f.).

(c) |a| = √(9 + 16) = 5, so the unit vector is (3i − 4j)/5 = 0.6i − 0.8j.

Worked example 2: a point dividing a line in a ratio

Relative to O, A has position vector 2i + j and B has position vector 8i + 10j. P lies on AB with AP : PB = 1 : 2. Find the position vector of P.

With m = 1 and n = 2: p = (2a + 1b)/3.

2a + b = (4i + 2j) + (8i + 10j) = 12i + 12j.

p = 4i + 4j.

Check: AP = (4i + 4j) − (2i + j) = 2i + 3j and PB = (8i + 10j) − (4i + 4j) = 4i + 6j = 2 × AP. ✓

The common slip is putting m with a instead of with b. P is closer to A, so A's vector gets the larger weight.

Worked example 3: where two lines meet in a triangle

In triangle OAB, OA = a and OB = b. M is the midpoint of OA. N is on AB with AN : NB = 2 : 1. The lines ON and BM meet at X. Find OX in terms of a and b.

Step 1: each line in vector form.

ON = a + (2/3)(b − a) = (1/3)a + (2/3)b.

Since X is on ON: OX = λ[(1/3)a + (2/3)b] = (λ/3)a + (2λ/3)b.

BM = OM − OB = (1/2)a − b. Since X is on BM: OX = b + μ[(1/2)a − b] = (μ/2)a + (1 − μ)b.

Step 2: equate coefficients. a and b are not parallel, so:

λ/3 = μ/2 and 2λ/3 = 1 − μ.

From the first, μ = 2λ/3. Then 2λ/3 = 1 − 2λ/3, so 4λ/3 = 1, so λ = 3/4 and μ = 1/2.

OX = (1/4)a + (1/2)b.

So X is the midpoint of BM, and OX : XN = 3 : 1. State "since a and b are non-parallel" before equating; that sentence is exactly the fact the specification names.

Worked example 4: resolving and a vector of given length

(a) Find the vector of magnitude 15 in the direction of 4i + 3j, and the angle it makes with i. (b) Write a vector of magnitude 10 at 30° above the positive x-axis in i, j form.

(a) |4i + 3j| = 5. The unit vector is (4i + 3j)/5, so the required vector is 15 × (4i + 3j)/5 = 12i + 9j. The angle with i is tan⁻¹(3/4) = 36.9°.

(b) 10 cos 30° i + 10 sin 30° j = 5√3 i + 5j (about 8.66i + 5j).

Resolving is how vector questions connect with velocity: a velocity of 10 m/s at 30° means 5√3 m/s across and 5 m/s up.

Mistakes our tutors see

  1. AB written as a − b instead of b − a.
  2. Ratio weights swapped in the m : n formula.
  3. Equating coefficients without saying a and b are non-parallel.
  4. Using one parameter for both lines, so the equations cannot be solved.
  5. Collinearity "shown" by parallel vectors only, with no shared point stated.
  6. Magnitude with negative signs mishandled, for example √(9 − 16).
  7. Answers left as a mix of i, j form and column form in the same line.

When to get help with vectors

Your child may need guided practice if:

  • they can add vectors but freeze at "find OX";
  • every proof stops after writing one route around the diagram;
  • they cannot explain why two vectors being multiples means the lines are parallel;
  • ratio questions come out right only when the ratio is 1 : 1;
  • they draw no diagram, so routes such as O to A to B are hard to follow.

Self-check

  1. Find |5i − 12j|.
  2. Find the unit vector in the direction of 6i + 8j.
  3. A is (−1, 4) and B is (5, −2). Find the position vector of the point dividing AB in the ratio 2 : 1.
  4. a and b are non-parallel and (p − 2)a + (q + 1)b = 3a − 4b. Find p and q.
  5. Are P(2, 1), Q(5, 7) and R(9, 15) collinear?

Answers. 1: 13. 2: 0.6i + 0.8j. 3: ((1 × −1) + 2 × 5)/3 = 3 and ((1 × 4) + 2 × −2)/3 = 0, so 3i. 4: p = 5, q = −5. 5: PQ = 3i + 6j and QR = 4i + 8j are both multiples of i + 2j and share Q, so yes.

Where this leads

Vectors come straight after the rational-power binomial work in the specification, and they connect closely with the Cartesian coordinates section: the ratio formula appears in both. If the 4MA1 basics are shaky, start with 4MA1 Higher vector proofs.

Cambridge students meet similar work, plus velocity and collision problems, in 0606 vectors in two dimensions. At IB HL, vectors move into three dimensions with lines and planes; our HL vectors guide shows what comes next.

How Maths Bodhi helps

In the free demo, our tutor sets one i, j question and one "find where the lines meet" proof, and checks whether your child can name each route on the diagram. Tutors are matched to 4PM1, and proofs are practised with full written reasoning, which is how marks are won in this section. Families outside Gurgaon can choose Further Pure lessons over video.

Home tuition is available in Gurgaon (Gurugram). Students elsewhere in India and abroad learn with us online. You can book a free demo class.

Written and checked by the Maths Bodhi team. Facts checked against official Cambridge International and Pearson sources, November 2026.

Frequently asked questions

What vectors are in IGCSE Further Pure Maths?
Section 7 of 4PM1 covers adding, subtracting and scaling coplanar vectors, i and j components, magnitude, position vectors, unit vectors, and simple vector geometry including collinearity, parallel lines, concurrency and the point dividing a line in a ratio.
How do you find the position vector of a point dividing AB in the ratio m : n?
Use p = (na + mb)/(m + n), where a and b are the position vectors of A and B. The point is nearer to A when m is smaller than n.
How do you prove three points are collinear with vectors?
Show that two of the vectors between them, such as AB and BC, are multiples of each other, and state that they share a common point, B.
Why must a and b be non-parallel when equating coefficients?
If a and b are non-parallel, the only way αa + βb can equal γa + δb is α = γ and β = δ. The specification expects this fact in vector proofs.
Is the vector magnitude formula given in the 4PM1 exam?
No. Nothing from the vectors section is printed on the 4PM1 formulae sheet, so learn |pi + qj| = √(p² + q²) and the ratio formula.
further pure vectors4PM1 vectorsposition vectors IGCSEvector geometry proofsIGCSE maths tutor

Related guides

Keep exploring this maths topic

IGCSE Maths18 Nov 2026

Vectors in Two Dimensions in IGCSE Additional Maths (0606 Topic 13)

0606 vectors in one guide: notation, magnitude and unit vectors, position vectors and dividing a line in a ratio, equating like vectors, velocity vectors and collisions, and the λ and μ method for where two lines meet. Four worked examples and a self-check.

additional maths vectors0606 vectorsposition vectors and unit vectorsvelocity vectors

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Additional Maths Vectors Questions (0606): Position Vectors, Geometry and Velocity

Nine original 0606-style vector questions in rising difficulty, with worked answers and mark notes: magnitude and unit vectors, position vectors and ratios, equating like vectors, a vector geometry intersection, position from a velocity vector, collision, a river crossing and closest approach.

0606 vectors practiceposition vectors questionsvelocity vectorsvector geometry 0606

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Vector Geometry (0580 E7.4): Midpoints, Ratios, Parallel Lines and Collinear Points

Vector geometry for Cambridge IGCSE 0580 Extended (E7.4): writing routes in terms of a and b, position vectors, points that divide a line in a ratio, and how to prove lines parallel or points collinear, with the sentences that earn the final mark. Four worked examples and a self-check.

IGCSE vector geometrycollinear vectors proofvectors ratio questions0580 E7.4

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Further Pure Maths Syllabus (Edexcel 4PM1): All 10 Sections, Papers, Grades and a Study Order

The complete guide to the Pearson Edexcel International GCSE in Further Pure Mathematics (4PM1): every section and sub-topic from the official specification, how the two papers work, grades, the formulae sheet, Summer 2027 dates, a recommended study order and links to a guide for every section.

IGCSE further pure maths syllabus4PM1 specificationEdexcel Further Pure Mathematics4PM1 topics

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Further Pure Maths Coordinate Geometry (4PM1 Section 8): Distance, Ratio, Gradient and Straight Lines

Section 8 of Edexcel Further Pure Mathematics (4PM1), "Rectangular Cartesian coordinates": distance between points, the point dividing a line in a ratio, gradient, equations of straight lines, and parallel and perpendicular lines. Four worked examples and a self-check.

further pure coordinate geometry4PM1 straight linesperpendicular lines IGCSEratio formula coordinates

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

Edexcel IGCSE Vectors and Transformations: Vector Proofs, Magnitude and Describing Transformations (4MA1)

Heading 5 of 4MA1: vectors (Higher only) and transformation geometry (both tiers). Column vectors, magnitude, vector geometry proofs, and full descriptions of rotations, reflections, translations and enlargements, with four worked examples.

Edexcel IGCSE vectors4MA1 transformationsvector geometry proofsdescribing transformations IGCSE

By Maths Bodhi Team

Read guide