The binomial series is Section 6 of Edexcel International GCSE Further Pure Mathematics (4PM1), and it goes further than most IGCSE-level courses. You expand (1 + x)ⁿ in two cases: when n is a positive integer, which gives a finite expansion, and when n is rational (negative or fractional) and |x| < 1, which gives an infinite series that you truncate. The specification says the validity condition for the second case is expected, so "state the range of x" is part of nearly every answer.
For students who find this jump hard, a tutor who teaches Edexcel Further Pure can take the expansion apart term by term, which is usually where the confusion sits.
What the specification asks
- 6A Use of the binomial series (1 + x)ⁿ when:
- n is a positive integer;
- n is rational and |x| < 1, with the validity condition expected.
Same for every candidate. 4PM1 has one tier, targeting grades 9–4 (grade 3 allowed), so there is no Core or Extended version of this section. The section-by-section 4PM1 overview shows what else you need.
On the formulae sheet. The binomial series is printed:
(1 + x)ⁿ = 1 + nx + n(n − 1)/2! x² + ... + n(n − 1)...(n − r + 1)/r! xʳ + ..., for |x| < 1.
You still need to know how to apply it: replacing x with 2x or −3x, and factorising (a + bx)ⁿ into aⁿ(1 + bx/a)ⁿ first.
Calculator. Calculators are allowed on both 4PM1 papers, and the nCr button helps with positive integer n. For rational n there is no button. Work out each coefficient as a fraction by hand, and keep fractions exact; the calculator is for checking an approximation at the end.
The pattern behind each term
For the term in xʳ, the coefficient is n(n − 1)(n − 2)... (r factors) divided by r!. So for n = 1/2:
- x term: 1/2
- x² term: (1/2)(−1/2)/2 = −1/8
- x³ term: (1/2)(−1/2)(−3/2)/6 = 1/16
When x is replaced by kx, every term in xʳ picks up kʳ, and that includes the sign. Brackets around (kx) prevent most errors.
Worked example 1: positive integer n
Expand (1 + 2x)⁵ as far as the term in x³.
(1 + 2x)⁵ = 1 + 5(2x) + (5 × 4/2)(2x)² + (5 × 4 × 3/6)(2x)³ + ...
= 1 + 10x + 10(4x²) + 10(8x³) + ...
= 1 + 10x + 40x² + 80x³ + ...
Because n is a positive integer, the expansion stops after the x⁵ term and is valid for every x.
Worked example 2: one coefficient in (a + bx)ⁿ
Find the coefficient of x³ in the expansion of (2 − x/2)⁶.
The term in x³ uses ⁶C₃ = 20, the first term to the power 3, and the second term to the power 3:
20 × 2³ × (−1/2)³ = 20 × 8 × (−1/8) = −20.
Writing the second term as (−x/2) in a bracket keeps the negative sign. Students who write −x³/2 instead of (−x/2)³ = −x³/8 lose the mark here.
Worked example 3: a fractional power and its validity
(a) Expand (1 − 3x)^(1/2) in ascending powers of x up to the term in x³, and state the values of x for which it is valid. (b) Use x = 0.01 to estimate √0.97.
(a) Use n = 1/2 and replace x with (−3x):
1 + (1/2)(−3x) + [(1/2)(−1/2)/2] × (−3x)² + [(1/2)(−1/2)(−3/2)/6] × (−3x)³
= 1 − (3/2)x + (−1/8)(9x²) + (1/16)(−27x³)
= 1 − (3/2)x − (9/8)x² − (27/16)x³ + ...
Validity: |−3x| < 1, so |x| < 1/3, or −1/3 < x < 1/3.
(b) With x = 0.01, (1 − 0.03)^(1/2) = √0.97:
1 − 0.015 − 0.0001125 − 0.0000016875 = 0.98488581 (to 8 d.p.).
The calculator gives √0.97 = 0.98488578..., so four terms are accurate to 7 decimal places. Choosing x so that 1 − 3x is the number you want is the whole trick; x = 0.01 is inside the valid range.
Worked example 4: factorising first
Expand 1/√(4 + x) up to the term in x², and state the range of validity.
Write 1/√(4 + x) = (4 + x)^(−1/2). The bracket must start with 1, so take out the 4:
(4 + x)^(−1/2) = 4^(−1/2) (1 + x/4)^(−1/2) = (1/2)(1 + x/4)^(−1/2).
Expand with n = −1/2 and x replaced by x/4:
(1 + x/4)^(−1/2) = 1 + (−1/2)(x/4) + [(−1/2)(−3/2)/2] × (x/4)² + ...
= 1 − x/8 + (3/8)(x²/16) + ... = 1 − x/8 + 3x²/128 + ...
Multiply by 1/2: 1/2 − x/16 + 3x²/256 + ...
Validity: |x/4| < 1, so |x| < 4.
The most common error here is expanding (4 + x)^(−1/2) as if the 4 were a 1. Always make the first term 1 before using the series.
Mistakes our tutors see
- Losing negative signs when x is replaced by −3x, especially in the x³ term.
- Forgetting the brackets, writing 2x² instead of (2x)² = 4x².
- No validity statement for rational n, or giving |x| < 1 when the bracket is (1 − 3x).
- Not factorising (a + bx)ⁿ before expanding with rational n.
- Dividing by r incorrectly, for example using 2 instead of 3! = 6 for the x³ term.
- Stopping too early or too late compared with "up to and including the term in x²".
- Using a value of x outside the valid range for an approximation.
When to get help with the binomial series
Consider support when your child:
- can expand (1 + x)⁵ but not (1 − 3x)^(1/2);
- regularly gets the right size of coefficient but the wrong sign;
- never writes the validity condition, even when reminded;
- cannot decide which x to substitute for an approximation such as √0.97 or ∛1.03;
- copes with expansions alone but not when they appear inside a longer question.
Self-check
- Write the first three terms of (1 − x)⁷.
- Expand (1 + x)^(−1) up to the term in x³ and state the validity.
- State the range of x for which (1 + 5x)^(−2/3) can be expanded.
- Find the coefficient of x² in (1 + 2x)^(3/2).
- Use the first three terms of (1 + x)¹⁰ to estimate 1.02¹⁰.
Answers. 1: 1 − 7x + 21x². 2: 1 − x + x² − x³, valid for |x| < 1. 3: |5x| < 1, so |x| < 1/5. 4: (3/2)(1/2)/2 × 2² = 3/2. 5: 1 + 10(0.02) + 45(0.02)² = 1.218 (the true value is 1.2190 to 4 d.p.).
Where this leads
The binomial series follows naturally from Section 5 sums and sigma notation, and it is followed in the specification by the 4PM1 vectors guide. For what is printed on the paper and what is not, see which formulae Pearson prints.
Cambridge 0606 covers the binomial expansion with positive powers only, so rational n is one of the clearest ways 4PM1 reaches further. Rational-power expansions are a standard part of A level pure mathematics, so this section gives a head start for students heading to Cambridge A level maths support.
How Maths Bodhi helps
In the free demo, our tutor sets one positive-integer expansion and one rational-power expansion with validity, and checks the signs and brackets in each line. Tutors are matched to 4PM1, and practice is exam-style, with every expansion written out rather than taken from a calculator. Students in other cities join through IGCSE maths lessons online.
Home tuition is available in Gurgaon (Gurugram). Students elsewhere in India and abroad learn with us online. You can book a free demo class.
Written and checked by the Maths Bodhi team. Facts checked against official Cambridge International and Pearson sources, November 2026.
Frequently asked questions
- Is the binomial series in IGCSE Further Pure Maths?
- Yes. Section 6 of 4PM1 covers the binomial series (1 + x)ⁿ when n is a positive integer and when n is rational with |x| < 1, and the validity condition is expected.
- Is the binomial expansion on the 4PM1 formulae sheet?
- Yes. The formulae sheet gives the series for (1 + x)ⁿ with the condition |x| < 1. You still need to know how to substitute terms like 2x or −3x and how to factorise (a + bx)ⁿ.
- How do I find the range of validity of a binomial expansion?
- For (1 + kx)ⁿ with rational n, the expansion is valid when |kx| < 1, so |x| < 1/|k|. For (a + bx)ⁿ, factorise to aⁿ(1 + bx/a)ⁿ and use |bx/a| < 1.
- Can I expand with negative or fractional powers in IGCSE?
- In Edexcel 4PM1, yes. Cambridge IGCSE Additional Mathematics 0606 limits the binomial theorem to positive integer powers.
- How do I use a binomial expansion to approximate a square root?
- Choose x so the bracket equals the number you need and x is inside the valid range, for example x = 0.01 in (1 − 3x)^(1/2) to estimate √0.97, then add the first few terms.
