The Pearson Edexcel International GCSE in Further Pure Mathematics, code 4PM1, is a single-tier qualification with ten content sections, from logarithms to trigonometry, assessed by two 2-hour calculator papers of 100 marks each. It assumes the content of International GCSE Mathematics A (Higher) or Mathematics B, apart from statistics and matrices, and builds on it with calculus, series, vectors and trigonometry that reach towards A level. This guide lists every section and sub-topic from the official specification, explains how the papers and grades work, and links to a full guide for each section.
All facts below come from the specification (Issue 1, January 2016) and Pearson's 2026/27 timetables and key dates. Families looking for a tutor matched to this exact code can start with our Edexcel Further Pure Maths tutoring, online across India and abroad or at home in Gurgaon.
4PM1 at a glance
| Feature | What the specification says |
|---|---|
| Qualification | Pearson Edexcel International GCSE (9–1) in Further Pure Mathematics |
| Specification | Issue 1, January 2016; first assessment June 2019 |
| Tier | Single tier; questions targeted at grades 9–4, with 3 allowed |
| Results below the minimum | Unclassified (U) |
| Papers | Paper 1 (4PM1/01) and Paper 2 (4PM1/02) |
| Each paper | 2 hours, 100 marks, 50%, around 11 questions |
| Content per paper | Any part of the specification; a question may need more than one section |
| Calculator | Allowed in both papers |
| Formulae | Formulae sheet (Appendix 4) included |
| Mark spread | About 40% over grades 4–5, about 60% over grades 6–9 |
| Content summary | Number; Algebra and calculus; Geometry and trigonometry |
| Assumed knowledge | 4MA1 Higher or 4MB1 content; not statistics or matrices |
You can check these on the official Pearson 4PM1 qualification page, which links to the specification.
Assessment objectives:
- AO1, knowledge of techniques: 30–40%.
- AO2, problems with no immediate method, possibly across topics: 20–30%.
- AO3, clear and accurate written solutions: 35–50%.
The AO3 weighting is unusual and important. A large share of the marks rewards how the working is written, not only the final answers.
All ten sections and their sub-topics
Because 4PM1 has one tier, there is no Core/Extended or Foundation/Higher split: every sub-topic below is examinable for every candidate.
1 Logarithmic functions and indices
- 1A The functions aˣ and log_b x (b a natural number greater than 1), with their graph shapes.
- 1B Laws of indices and logarithms, including change of base; solving aˣ = b.
- 1C Simple manipulation of surds for exact answers.
- 1D Rationalising the denominator.
Full guide: logarithms, indices and surds in 4PM1.
2 The quadratic function
- 2A Factorising and completing the square.
- 2B Using the discriminant: equal real, unequal real or no real roots.
- 2C Functions of the roots α and β, and forming equations with given roots.
Full guide: the quadratic function and roots α, β.
3 Identities and inequalities
- 3A Simple algebraic division by (x ± a) or (ax ± b).
- 3B The factor and remainder theorems; factorising cubics.
- 3C Solving equations, including one linear and one quadratic equation together, and cubics with a rational root.
- 3D Linear and quadratic inequalities.
- 3E Graphs of linear inequalities in two variables; simple linear programming.
Full guide: factor theorem, cubics and inequalities.
4 Graphs
- 4A Graphs of polynomials and rational functions with linear denominators, with asymptotes parallel to the axes.
- 4B Solving equations, including transcendental ones, by graphical methods (iteration not required).
Full guide: asymptotes and graphical solutions.
5 Series
- 5A ∑ notation.
- 5B Arithmetic and geometric series: general terms, sums to n terms, and the sum to infinity of a convergent geometric series with |r| < 1. No proofs required.
Full guide: arithmetic and geometric series in 4PM1.
6 The binomial series
- 6A (1 + x)ⁿ for positive integer n, and for rational n with |x| < 1, including the validity condition.
Full guide: binomial series with rational powers.
7 Scalar and vector quantities
- 7A Adding, subtracting and scaling coplanar vectors; equating coefficients of non-parallel vectors.
- 7B Components and resolved parts, using i and j.
- 7C Magnitude.
- 7D Position vectors.
- 7E Unit vectors.
- 7F Vector geometry: collinearity, parallel lines, concurrency, and the point dividing a line in a ratio.
Full guide: 4PM1 vectors and vector geometry.
8 Rectangular Cartesian coordinates
- 8A Distance between two points.
- 8B The point dividing a line in a given ratio.
- 8C Gradient.
- 8D Equations of straight lines.
- 8E Conditions for parallel and perpendicular lines.
Full guide: coordinate geometry of straight lines.
9 Calculus
- 9A Differentiating and integrating sums of multiples of xⁿ (but not integrating 1/x), sin ax, cos ax and eᵃˣ.
- 9B Product, quotient and simple chain rules.
- 9C Straight-line kinematics; areas; volumes of revolution about the axes.
- 9D Stationary and turning points.
- 9E Maxima and minima, including practical problems, with justification.
- 9F Tangents and normals.
- 9G Rates of change, connected rates of change and δy ≈ (dy/dx)δx.
Full guide: Further Pure calculus from rules to volumes.
10 Trigonometry
- 10A Radians, arc length and sector area.
- 10B Ratios of any angle in degrees or radians, their graphs and exact values.
- 10C 2D and 3D problems, including angles between a line and a plane and between two planes.
- 10D Sine and cosine formulae; area ½ab sin C.
- 10E cos²θ + sin²θ = 1.
- 10F tan θ = sin θ / cos θ.
- 10G Addition formulae for sin, cos and tan of (A ± B).
- 10H Simple trigonometric equations on a given interval.
Full guide: radians, addition formulae and trig equations.
Section summary table
| Section | Sub-topics | Builds on from 4MA1 Higher | Most new for students |
|---|---|---|---|
| 1 Logs and indices | 1A–1D | Indices, surds | Log laws, change of base |
| 2 Quadratic function | 2A–2C | Factorising, completing the square | Roots α and β |
| 3 Identities and inequalities | 3A–3E | Quadratic inequalities, regions | Factor and remainder theorems |
| 4 Graphs | 4A–4B | Plotting curves | Rational functions, asymptotes |
| 5 Series | 5A–5B | Arithmetic sequences | Geometric series, sum to infinity |
| 6 Binomial series | 6A | None directly | Expansions with rational n |
| 7 Vectors | 7A–7F | Column vectors, vector proofs | i, j and ratio work |
| 8 Coordinates | 8A–8E | Straight lines | Ratio formula |
| 9 Calculus | 9A–9G | Differentiating powers of x | Trig and exponential calculus, integration, volumes |
| 10 Trigonometry | 10A–10H | Sine and cosine rules, 3D | Radians, addition formulae, two planes |
The "builds on" column is our reading of the two specifications side by side, as a guide to where students usually start.
How 4PM1 is examined
- Two papers, same design. Both are 2 hours, 100 marks and around 11 questions. Neither paper is limited to some sections: each can test anything.
- Calculator on both. The calculator must have ln x, eˣ, standard form, and trig in degrees or radians. Models with symbolic algebra, symbolic differentiation or integration, databanks, text or formula retrieval, or QWERTY keyboards are prohibited.
- There is no non-calculator paper, but many questions ask for exact answers or "show that", so the algebra must still be written.
- Formulae sheet. It prints the series sums, the binomial series, the quotient rule, the cosine rule, the addition formulae, change of base and three mensuration formulae. The rest must be learned; see what the 4PM1 formulae sheet includes.
- Grades. Results are 9 to 4, with 3 allowed, and U below that.
Summer 2027 dates (Pearson final timetable): Paper 1 on Wednesday 19 May 2027, afternoon; Paper 2 on Wednesday 9 June 2027, afternoon. The specification says "Availability: January and June", but Pearson's 2026/27 key dates list no January 2027 International GCSE series. International centres' entry deadline for June 2027 is 21 March 2027, and June 2027 results may be released on 19 August 2027.
For pacing and layout advice, read our 4PM1 paper strategy guide.
A recommended study order (our advice)
The specification numbers the sections 1 to 10, but they do not have to be taught in that order. This is the order our tutors find works for most students:
- Section 1, logs and indices, then Section 2, quadratics: the algebra everything else uses.
- Section 3, identities and inequalities: polynomial skills needed for graphs and calculus.
- Section 8, coordinates, then Section 7, vectors: short, and they share the ratio idea.
- Section 4, graphs: easier once cubics and asymptote ideas are in place.
- Section 5, series, then Section 6, binomial series.
- Section 10, trigonometry: radians must come before calculus with sin and cos.
- Section 9, calculus: seven sub-points, and it draws on almost every other section.
- Mixed papers, because each paper mixes all ten sections.
A student starting in Grade 9 alongside 4MA1 can follow this over two years. A student starting later should allow more time for Sections 9 and 10.
Is 4PM1 right for your child?
Further Pure is a second maths qualification. It suits students who are secure on 4MA1 Higher and enjoy algebra. It is not a replacement for 4MA1: Pearson's specification assumes that content is already known.
If your school offers Cambridge instead, the closest course is 0606 Additional Mathematics. Our comparison of 4PM1 and 0606 sets out the differences. If your child is still working on the main course, start with the 4MA1 specification guide.
Where it leads
4PM1 covers ground that A level Mathematics and IB Analysis and Approaches start from: logarithms, the binomial series, differentiation and integration, and compound-angle trigonometry. Students moving on to A level can read what changes from IGCSE to A level maths, and those choosing between A level and IB can compare IB AA HL with A level maths.
How Maths Bodhi helps
The free demo is a diagnosis, not a sales call: our tutor sets a few questions across logs, quadratics and calculus and shows you where your child stands. Tutors are matched to the exact code, 4PM1, and progress is tracked through written method and exam-style papers. Where 4MA1 gaps hold back Further Pure, the same tutor covers them through our Edexcel IGCSE Maths A support.
Home tuition is available in Gurgaon (Gurugram). Students elsewhere in India and abroad learn with us online. You can book a free demo class.
Written and checked by the Maths Bodhi team. Facts checked against official Cambridge International and Pearson sources, November 2026.
Frequently asked questions
- What is IGCSE Further Pure Maths?
- It is the Pearson Edexcel International GCSE in Further Pure Mathematics, code 4PM1. It is a single-tier qualification with ten sections, including logarithms, series, vectors, calculus and trigonometry, assessed by two 2-hour papers.
- What topics are in the 4PM1 syllabus?
- The ten sections are logarithmic functions and indices, the quadratic function, identities and inequalities, graphs, series, the binomial series, scalar and vector quantities, rectangular Cartesian coordinates, calculus and trigonometry.
- Is a calculator allowed in 4PM1?
- Yes. A calculator may be used in both papers. It must have functions such as ln x, eˣ and trig in degrees or radians, and models with symbolic algebra or symbolic calculus are prohibited.
- What grades can you get in IGCSE Further Pure Maths?
- Questions target grades 9 to 4, with grade 3 allowed. Results below the minimum standard are unclassified (U).
- When are the 4PM1 exams in 2027?
- Pearson's Summer 2027 final timetable has 4PM1 Paper 1 on Wednesday 19 May 2027 and Paper 2 on Wednesday 9 June 2027, both in the afternoon. There is no January 2027 International GCSE series in Pearson's key dates.
- Do I need to take 4MA1 before 4PM1?
- The specification expects thorough knowledge of the content common to International GCSE Mathematics A (Higher) or Mathematics B, apart from statistics and matrices. In practice, that means being secure on 4MA1 Higher content before or while studying 4PM1.
