Trigonometry is Section 10 of Edexcel International GCSE Further Pure Mathematics (4PM1), and it has more sub-points than any other section: eight, from 10A to 10H. Beyond 4MA1 Higher, it adds radian measure, ratios of any angle in degrees or radians, the angle between two planes in 3D, the identity sin²θ + cos²θ = 1, the addition formulae for sin, cos and tan of (A ± B), and trig equations on a given interval. Several of those formulae are printed on the formulae sheet, but knowing when to use them is the real skill.
For a student who wants to work through this section with someone who knows the Pearson course, a Further Pure trigonometry tutor can set the right practice for each sub-point.
Section 10 at a glance
| Spec point | Content |
|---|---|
| 10A | Radian measure; arc length s = rθ and sector area A = ½r²θ |
| 10B | sin, cos and tan of any angle in degrees or radians, and their graphs; exact values for 30°, 45°, 60° and related angles such as 120° and 300° |
| 10C | Problems in two or three dimensions, including the angle between a line and a plane and between two planes |
| 10D | Sine and cosine formulae; area ½ab sin C |
| 10E | sin²θ + cos²θ = 1 |
| 10F | tan θ = sin θ / cos θ |
| 10G | Addition formulae for sin(A ± B), cos(A ± B), tan(A ± B) |
| 10H | Simple trig equations on a given interval |
Tier status. 4PM1 is a single-tier exam aimed at grades 9–4 (3 allowed). There is no Core or Extended split, so all eight points apply. The Edexcel 4PM1 overview shows the other nine sections.
What Pearson prints and what you learn.
- On the formulae sheet: the cosine rule, tan θ = sin θ / cos θ, and all six addition formulae.
- To learn: s = rθ, A = ½r²θ, the sine rule, sin²θ + cos²θ = 1, area = ½ab sin C, and the exact values.
Calculator handling. Calculators are allowed on both papers. Set radians or degrees to match the question; getting this one setting wrong is among the easiest ways to lose marks here. Questions asking for exact values, such as sin 75°, must be done with the addition formulae and surds, not decimals.
Exact values you need without thinking
| θ | 30° (π/6) | 45° (π/4) | 60° (π/3) |
|---|---|---|---|
| sin θ | 1/2 | √2/2 | √3/2 |
| cos θ | √3/2 | √2/2 | 1/2 |
| tan θ | 1/√3 | 1 | √3 |
Related angles come from the graphs or the quadrants: sin 120° = sin 60° = √3/2, and cos 300° = cos 60° = 1/2.
Worked example 1: a sector and a segment in radians
A sector OAB has radius 8 cm and angle AOB = 1.2 radians. Find (a) the arc length AB, (b) the area of the sector, (c) the perimeter of the sector, (d) the area of the segment between the chord AB and the arc.
(a) s = rθ = 8 × 1.2 = 9.6 cm.
(b) A = ½r²θ = ½ × 64 × 1.2 = 38.4 cm².
(c) Perimeter = 8 + 8 + 9.6 = 25.6 cm.
(d) Triangle OAB = ½ × 8 × 8 × sin 1.2 = 32 × 0.93204 = 29.825 cm². Segment = 38.4 − 29.825 = 8.57 cm² (3 s.f.).
Part (d) needs sin 1.2 in radians. In degree mode you get 32 × 0.0209 and a nonsense answer.
Worked example 2: exact values from the addition formulae
Find the exact values of (a) sin 75°, (b) tan 15°.
(a) sin 75° = sin(45° + 30°) = sin 45° cos 30° + cos 45° sin 30°
= (√2/2)(√3/2) + (√2/2)(1/2) = (√6 + √2)/4.
(b) tan 15° = tan(45° − 30°) = (tan 45° − tan 30°)/(1 + tan 45° tan 30°)
= (1 − 1/√3)/(1 + 1/√3). Multiply top and bottom by √3: (√3 − 1)/(√3 + 1).
Rationalise: (√3 − 1)²/(3 − 1) = (4 − 2√3)/2 = 2 − √3.
Both formulae are on the sheet; the exact values and the surd work are not. Check with the calculator at the end: tan 15° ≈ 0.268 and 2 − √3 ≈ 0.268.
Worked example 3: two trig equations
(a) Solve 2cos²x + 3 sin x − 3 = 0 for 0° ≤ x < 360°.
Use cos²x = 1 − sin²x: 2(1 − sin²x) + 3 sin x − 3 = 0.
So −2sin²x + 3 sin x − 1 = 0, or 2sin²x − 3 sin x + 1 = 0.
(2 sin x − 1)(sin x − 1) = 0, so sin x = 1/2 or sin x = 1.
sin x = 1/2 gives x = 30° or 150°. sin x = 1 gives x = 90°.
x = 30°, 90°, 150°.
(b) Solve cos(2x − π/6) = 1/2 for 0 ≤ x ≤ π.
Let θ = 2x − π/6. When 0 ≤ x ≤ π, the range for θ is −π/6 ≤ θ ≤ 11π/6.
cos θ = 1/2 gives θ = π/3 or 5π/3 in that range (−π/3 is below −π/6, so it is out).
2x − π/6 = π/3 gives x = π/4. 2x − π/6 = 5π/3 gives 2x = 11π/6, so x = 11π/12.
x = π/4 or x = 11π/12.
Changing the interval before solving is the step that finds every solution and rejects the extras.
Worked example 4: angles in a pyramid, including two planes
A right pyramid VABCD has a square base ABCD of side 10 cm and vertical height 12 cm. Find (a) the angle between a sloping face and the base, (b) the angle between a sloping edge VA and the base.
Let M be the centre of the base and N the midpoint of AB.
(a) The angle between the plane VAB and the base is angle VNM, because VN and MN are both perpendicular to the common line AB. MN = 5, so tan(VNM) = 12/5, giving 67.4°.
(b) The angle between VA and the base is angle VAM. AM is half the diagonal: ½√(10² + 10²) = 5√2. So tan(VAM) = 12/(5√2), giving 59.5°.
Part (a) is the "angle between two planes", which 4PM1 includes and 4MA1 Higher does not. The key is finding a line in each plane perpendicular to the line where the planes meet.
Mistakes our tutors see
- Wrong calculator mode for radians or degrees.
- Solutions missing because the interval was not adjusted for 2x or 3x.
- Dividing by sin x or cos x in an equation and losing a solution.
- Using sin(A + B) = sin A + sin B, which is false.
- Wrong triangle for a plane-plane angle, often using the edge instead of the perpendicular height of the face.
- Sector area with degrees in A = ½r²θ.
- Exact answers given as decimals when "exact" or "show that" appears.
When to get help with trigonometry
Ask for help early if your child:
- gets one solution of a trig equation but never the full set;
- cannot rewrite cos²x as 1 − sin²x to make a quadratic;
- mixes up radians and degrees in the same answer;
- finds 3D questions impossible without a model in front of them;
- knows the addition formulae are on the sheet but does not know when to use them.
Self-check
- Convert 135° to radians.
- Find the exact value of cos 105°.
- Solve tan x = √3 for 0 ≤ x < 2π.
- In triangle ABC, a = 7 cm, b = 8 cm and C = 60°. Find c and the area.
- Simplify sin 3x cos x − cos 3x sin x.
Answers. 1: 3π/4. 2: cos(60° + 45°) = (1/2)(√2/2) − (√3/2)(√2/2) = (√2 − √6)/4. 3: x = π/3 or 4π/3. 4: c² = 49 + 64 − 56 = 57, so c = 7.55 cm; area = ½ × 7 × 8 × sin 60° = 14√3 ≈ 24.2 cm². 5: sin 2x.
Where this leads
Trig ratios feed straight into Section 9 calculus with sin and cos, where radians are required. If you are deciding between Pearson and Cambridge, see how 4PM1 trigonometry differs from 0606: Cambridge adds sec, cosec and cot, while 4PM1 has the addition formulae. Cambridge students can compare with the 0606 identities and equations chapter.
The addition formulae return at IB level in compound angles in IB AA HL. For trigonometry support at any stage, see our trigonometry tutoring.
How Maths Bodhi helps
In the free demo, our tutor sets one radian sector question, one exact-value question and one equation on an interval, and checks the calculator mode and the interval work. Tutors are matched to 4PM1, and progress is tracked through written method in exam-style practice. Students who live outside Gurgaon can choose remote IGCSE maths tutoring.
Home tuition is available in Gurgaon (Gurugram). Students elsewhere in India and abroad learn with us online. You can book a free demo class.
Written and checked by the Maths Bodhi team. Facts checked against official Cambridge International and Pearson sources, November 2026.
Frequently asked questions
- What trigonometry is in IGCSE Further Pure Maths?
- Section 10 of 4PM1 covers radians with arcs and sectors, trig ratios of any angle and their graphs, exact values, 2D and 3D problems including the angle between two planes, sine and cosine rules, sin²θ + cos²θ = 1, tan θ = sin θ / cos θ, the addition formulae and trig equations.
- Are the addition formulae given in the 4PM1 exam?
- Yes. The formulae sheet gives sin(A ± B), cos(A ± B) and tan(A ± B), along with the cosine rule and tan θ = sin θ / cos θ. The sine rule and the arc and sector formulae must be learned.
- Are radians in IGCSE Further Pure Maths?
- Yes. Radian measure is Section 10A, with arc length rθ and sector area ½r²θ, and angles in questions may be in degrees or radians.
- Is the angle between two planes in 4PM1?
- Yes. Section 10C includes the angle between a line and a plane and between two planes. Edexcel 4MA1 Higher says the angle between two planes will not be required.
- How do I find all solutions of a trig equation like cos(2x − π/6) = 1/2?
- Change the interval for the expression inside the bracket first, find every solution of cos θ = 1/2 in that new interval, and then convert each back to x.
