WhatsApp us
IGCSE Maths18 Nov 2026

Vectors in Two Dimensions in IGCSE Additional Maths (0606 Topic 13)

0606 vectors in one guide: notation, magnitude and unit vectors, position vectors and dividing a line in a ratio, equating like vectors, velocity vectors and collisions, and the λ and μ method for where two lines meet. Four worked examples and a self-check.

Vectors in Two Dimensions in IGCSE Additional Maths (0606 Topic 13)

A vector in 0606 has a size and a direction, and you will see it written as a column, as ai + bj, as a bold letter or as AB with an arrow. The core skills are finding a magnitude, |ai + bj| = √(a² + b²); finding a unit vector by dividing a vector by its magnitude; using position vectors to locate points; and solving problems with velocity, where position = starting position + time × velocity. Topic 13 of Cambridge IGCSE Additional Mathematics then pushes these into geometry and motion problems that need careful setting out.

Vectors look easy until two unknowns appear. If λ and μ questions are where you stop, 0606 specialists can take you through the method step by step.

The syllabus content

Topic 13, Vectors in two dimensions, has four learning outcomes in the 2025–2027 syllabus:

  • 13.1 Understand and use vector notation, in any of the usual forms. Correct vector notation is expected in your answers.
  • 13.2 Know and use position vectors and unit vectors. The unit vector in the direction of a is a divided by |a|.
  • 13.3 Find the magnitude of a vector, add and subtract vectors, and multiply by scalars. This includes equating like vectors and solving vector geometry problems, with a diagram given in more complex cases.
  • 13.4 Compose and resolve velocities, including using a velocity vector to find position and solving problems such as particles colliding.

There is no Core or Extended split; every candidate studies this and it can be on either paper. 0580 Extended vector geometry is the foundation, and our 0580 vector geometry proofs guide is a good refresher. For the other topics, see the full list of Additional Maths topics.

Notation and key facts

IdeaHow to write itFact to use
Vector from A to BAB (arrow above), or b − aAB = OB − OA
Magnitudev between two vertical bars√(x² + y²) for xi + yj
Unit vectorv divided by its magnitudeHas magnitude 1
Parallel vectorsOne is a scalar multiple of the otherki + 6j is parallel to 2i + 3j when k = 4
Equal vectorsSame i and same j componentsEquate coefficients

Printed papers show vectors in bold. In handwritten work, underline the letter so that a vector a cannot be mistaken for a number a. Examiners expect correct notation.

Worked example 1: magnitude, unit vectors and a ratio

(a) a = 3i − 4j. Find |a| and the unit vector in the direction of a. (b) A and B have position vectors 2i + 7j and 8i − j. Find AB, |AB| and the position vector of the point P on AB with AP : PB = 1 : 3.

(a) |a| = √(3² + (−4)²) = √25 = 5. Unit vector = (3i − 4j)/5 = 0.6i − 0.8j.

(b) AB = OB − OA = (8 − 2)i + (−1 − 7)j = 6i − 8j, and |AB| = √(36 + 64) = 10.

P is one quarter of the way from A to B, because AP : PB = 1 : 3 splits AB into 4 equal parts. So:

OP = OA + ¼AB = (2i + 7j) + (1.5i − 2j) = 3.5i + 5j.

The common error is using 1/3 instead of 1/4. Add the ratio parts first.

Worked example 2: equating like vectors

Find the constants p and q such that p(2i + j) + q(i − 3j) = 7i − 7j.

Collect the i and j parts on the left: (2p + q)i + (p − 3q)j = 7i − 7j.

Equate coefficients:

  • i: 2p + q = 7
  • j: p − 3q = −7

From the first, q = 7 − 2p. Substitute: p − 21 + 6p = −7, so 7p = 14 and p = 2, then q = 3.

Check: 2(2i + j) + 3(i − 3j) = 4i + 2j + 3i − 9j = 7i − 7j.

Worked example 3: velocity, position and collision

At noon, ship A is at the point with position vector (i + 2j) km and moves with constant velocity (4i + 3j) km/h. Ship B is at (13i + 2j) km and moves with velocity (−2i + 3j) km/h. (a) Find the speed of A. (b) Find the position vectors of A and B t hours after noon. (c) Show that the ships collide, and find when and where.

(a) Speed is the magnitude of velocity: √(16 + 9) = 5 km/h.

(b) Position = initial position + t × velocity:

  • rA = (1 + 4t)i + (2 + 3t)j
  • rB = (13 − 2t)i + (2 + 3t)j

(c) For a collision, both components must be equal at the same time t.

  • i: 1 + 4t = 13 − 2t, so t = 2
  • j: 2 + 3t = 2 + 3t, true for every t, so it is true at t = 2

The ships collide 2 hours after noon (at 2 pm), at the point with position vector 9i + 8j km.

Checking one component is not enough: you must show the other component agrees at the same t. The same position–velocity idea is used for particles in a straight line in 0606 kinematics, though there the velocity changes with time.

Worked example 4: where two lines cross (λ and μ)

OA = a and OB = b. P is the point on OA with OP = ⅔a, and Q is the midpoint of AB. The lines OQ and BP meet at X. Find OX in terms of a and b.

Write OX in two ways.

Along OQ: OQ = ½(a + b), so OX = λOQ = ½λa + ½λb for some number λ.

Along BP: BP = OP − OB = ⅔a − b, so OX = OB + μBP = b + μ(⅔a − b) = ⅔μa + (1 − μ)b.

a and b are not parallel, so equate their coefficients:

  • a: ½λ = ⅔μ
  • b: ½λ = 1 − μ

So ⅔μ = 1 − μ, giving μ = 3/5, and then λ = 4/5.

OX = ⅖a + ⅖b = ⅖(a + b).

The step "a and b are not parallel, so equate coefficients" is the reason the method works. State it, because it is part of the justification.

Calculator and non-calculator

On Paper 1, vector questions are usually exact: surd magnitudes such as √20 = 2√5, fractional λ and μ, and unit vectors with surd denominators. On Paper 2, velocity problems with bearings or angles may need trigonometry to resolve a velocity into i and j parts, and answers go to 3 significant figures. In both, write vectors in a consistent form and keep units on speeds and positions.

Mistakes our tutors see

  1. AB = OA − OB instead of OB − OA.
  2. Speed given as a vector instead of a magnitude.
  3. Using the wrong fraction for a ratio, as in Example 1.
  4. Checking only one component in a collision question.
  5. Using the same letter for the scalar on both lines in a λ–μ question.
  6. Missing vector notation, so a vector answer looks like a number.

When to get help with vectors

  • You can find magnitudes but cannot set up a geometry problem with λ and μ.
  • Velocity questions confuse you because of the time variable t.
  • You are not sure when two vectors are parallel or how to show it.
  • Your answers are often right but lose marks for notation.

Self-check

  1. Find |5i + 12j| and the unit vector in that direction.
  2. A is (1, −2) and B is (7, 6). Find AB and |AB|.
  3. A particle starts at (2i − 3j) m and moves with velocity (3i + 4j) m/s. Find its position after 4 seconds and its speed.
  4. Find k if ki + 6j is parallel to 2i + 3j.

Answers. 1: 13, unit vector (5i + 12j)/13. 2: AB = 6i + 8j, |AB| = 10. 3: (2i − 3j) + 4(3i + 4j) = 14i + 13j m, speed 5 m/s. 4: ki + 6j = 2(2i + 3j) needs k = 4.

Where this leads

Vectors finish the algebra and geometry part of the course; next comes calculus, starting with differentiation in Topic 14. If you have just finished AP and GP in Topic 12, note that vectors are more about setting out than formulas. For timed practice, use the 0606 vectors practice questions.

At IB AA HL and A level, vectors move into three dimensions with lines, planes and the scalar product; see our IB HL vectors guide.

How Maths Bodhi helps

Our tutors insist on a labelled diagram and consistent notation from the first lesson, because most vector marks are lost in setting out rather than arithmetic. The free demo includes one collision question and one λ–μ question. See how we teach the wider course on our Cambridge IGCSE maths tutors page.

Home tuition is available in Gurgaon (Gurugram). Students elsewhere in India and abroad learn with us online. You can book a free demo class.

Written and checked by the Maths Bodhi team. Facts checked against official Cambridge International and Pearson sources, November 2026.

Frequently asked questions

What vectors are in IGCSE Additional Maths?
Topic 13 of 0606 covers vectors in two dimensions: notation, position and unit vectors, magnitude, adding and scaling vectors, equating like vectors, vector geometry, and velocity problems including collisions.
How do you find a unit vector?
Divide the vector by its magnitude. For 3i − 4j, the magnitude is 5, so the unit vector is (3i − 4j)/5.
How do you show that two particles collide?
Write each position vector in terms of time t, set the i components equal to find t, then show that the j components are also equal at that same value of t.
What is the difference between velocity and speed in vector questions?
Velocity is a vector with direction, such as 4i + 3j km/h. Speed is its magnitude, √(4² + 3²) = 5 km/h, and has no direction.
How do you find where two lines meet in a vector geometry question?
Write the position vector of the meeting point in two ways using unknown scalars such as λ and μ, then equate the coefficients of the two non-parallel vectors and solve.
additional maths vectors0606 vectorsposition vectors and unit vectorsvelocity vectorsIGCSE maths tutor

Related guides

Keep exploring this maths topic

IGCSE Maths18 Nov 2026

IGCSE Additional Maths Vectors Questions (0606): Position Vectors, Geometry and Velocity

Nine original 0606-style vector questions in rising difficulty, with worked answers and mark notes: magnitude and unit vectors, position vectors and ratios, equating like vectors, a vector geometry intersection, position from a velocity vector, collision, a river crossing and closest approach.

0606 vectors practiceposition vectors questionsvelocity vectorsvector geometry 0606

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Further Pure Maths Vectors (4PM1 Section 7): i and j, Position Vectors, Ratio and Vector Geometry

Section 7 of Edexcel Further Pure Mathematics (4PM1), "Scalar and vector quantities": i and j components, magnitude and unit vectors, position vectors, the point dividing AB in a ratio, and vector proofs of collinearity and intersection. Four worked examples and a self-check.

further pure vectors4PM1 vectorsposition vectors IGCSEvector geometry proofs

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Vectors (0580 E7.2–E7.3): Column Vectors, Vector Arithmetic and Magnitude

Column vectors for Cambridge IGCSE 0580 Extended: notation, adding, subtracting and multiplying by a scalar (E7.2), the magnitude √(x² + y²) (E7.3), parallel vectors and solving for unknowns, with four worked examples and a self-check.

IGCSE vectorscolumn vectorsmagnitude of a vector0580 E7.2 and E7.3

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Vector Geometry (0580 E7.4): Midpoints, Ratios, Parallel Lines and Collinear Points

Vector geometry for Cambridge IGCSE 0580 Extended (E7.4): writing routes in terms of a and b, position vectors, points that divide a line in a ratio, and how to prove lines parallel or points collinear, with the sentences that earn the final mark. Four worked examples and a self-check.

IGCSE vector geometrycollinear vectors proofvectors ratio questions0580 E7.4

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Maths Transformations and Vectors Topics (0580 E7): What Core and Extended Students Need

The four sub-topics of Cambridge IGCSE 0580 topic 7, Transformations and vectors, with their syllabus references, exactly where Core stops and Extended carries on, what changed in 2025, how the strand is examined on the non-calculator and calculator papers, and a study order.

IGCSE vectorsIGCSE transformations0580 E7IGCSE Extended maths

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

Edexcel IGCSE Vectors and Transformations: Vector Proofs, Magnitude and Describing Transformations (4MA1)

Heading 5 of 4MA1: vectors (Higher only) and transformation geometry (both tiers). Column vectors, magnitude, vector geometry proofs, and full descriptions of rotations, reflections, translations and enlargements, with four worked examples.

Edexcel IGCSE vectors4MA1 transformationsvector geometry proofsdescribing transformations IGCSE

By Maths Bodhi Team

Read guide