Differentiation finds the gradient of a curve at any point. In 0606 you must differentiate xⁿ for any rational n, sin x, cos x, tan x, eˣ and ln x, and combine them with the chain rule (a function inside a function), the product rule (two functions multiplied) and the quotient rule (one divided by another). No calculus formulas are printed in the List of formulas, so every derivative and every rule must be known by heart. Topic 14 of Cambridge IGCSE Additional Mathematics then uses these tools for tangents, stationary points, rates of change and, later, integration.
Calculus is usually the topic with the most marks at stake, and gaps in the basic rules spread into every question. If you want those rules checked properly, IGCSE Additional Mathematics tutors can work through them with you from the first lesson.
Where differentiation sits in 0606
Topic 14, Calculus, is the largest topic in the 2025–2027 syllabus, with fifteen learning outcomes. This guide covers the differentiation core:
- 14.1 The idea of a derived function. Only an informal idea of a limit is expected; differentiation from first principles is not required.
- 14.2 The notations f′(x), f″(x), dy/dx and d²y/dx², and the idea of δx → 0.
- 14.3 Derivatives of xⁿ (any rational n), sin x, cos x, tan x, eˣ and ln x, with constant multiples, sums and composite functions (chain rule). Trig angles are always in radians.
- 14.4 Differentiating products and quotients.
- 14.5 and 14.6 Gradients, tangents and normals, and stationary points (points of inflexion are not included).
Connected rates of change, small increments, practical maximum and minimum problems and the full nature tests are in our sibling guide to applications of differentiation in 0606. As 0606 has no Core or Extended tier, all of this is for every candidate, on both papers. For the whole course, read the 0606 syllabus summary. If you met simple differentiation in 0580 Extended, our 0580 differentiation guide is the starting point this builds on.
The derivatives to learn
| y | dy/dx | Note |
|---|---|---|
| xⁿ | nxⁿ⁻¹ | Any rational n, so √x = x^(1/2) and 1/x² = x⁻² |
| sin x | cos x | x in radians |
| cos x | −sin x | Watch the minus sign |
| tan x | sec²x | |
| eˣ | eˣ | |
| ln x | 1/x | For x > 0 |
The three rules, with u and v as functions of x:
- Chain rule: if y = f(g(x)), then dy/dx = f′(g(x)) × g′(x). In words: differentiate the outside, keep the inside, multiply by the derivative of the inside.
- Product rule: d(uv)/dx = u dv/dx + v du/dx.
- Quotient rule: d(u/v)/dx = (v du/dx − u dv/dx)/v².
The chain rule gives useful shortcuts: the derivative of eᵏˣ is keᵏˣ, of sin kx is k cos kx, and of ln(ax + b) is a/(ax + b).
Worked example 1: chain rule practice
Differentiate (a) y = (3x² − 5)⁴, (b) y = √(4x + 1), (c) y = ln(5x − 2), (d) y = tan 2x, and find the gradient of (d) at x = π/8.
(a) Outside: ( )⁴; inside: 3x² − 5, with derivative 6x.
dy/dx = 4(3x² − 5)³ × 6x = 24x(3x² − 5)³.
(b) Write as (4x + 1)^(1/2). dy/dx = ½(4x + 1)^(−1/2) × 4 = 2/√(4x + 1).
(c) dy/dx = 1/(5x − 2) × 5 = 5/(5x − 2).
(d) dy/dx = sec²(2x) × 2 = 2 sec²2x. At x = π/8, 2x = π/4, cos(π/4) = 1/√2, so sec²(π/4) = 2 and the gradient is 4.
Rewriting roots and fractions as powers before differentiating is the habit that prevents most errors.
Worked example 2: product and quotient rules
(a) Differentiate y = x²e³ˣ. (b) Differentiate y = (ln x)/x and find the coordinates of the stationary point.
(a) u = x², du/dx = 2x; v = e³ˣ, dv/dx = 3e³ˣ.
dy/dx = x² × 3e³ˣ + e³ˣ × 2x = xe³ˣ(3x + 2).
Factorising the answer is not always required, but it makes the next step (for example, solving dy/dx = 0) much easier.
(b) u = ln x, du/dx = 1/x; v = x, dv/dx = 1.
dy/dx = (x × 1/x − ln x × 1)/x² = (1 − ln x)/x².
Stationary point: dy/dx = 0 means 1 − ln x = 0, so x = e and y = (ln e)/e = 1/e. The stationary point is (e, 1/e). Testing the sign of dy/dx either side shows it is a maximum: for x slightly less than e, ln x < 1 and the gradient is positive; for x slightly more, it is negative.
Worked example 3: a tangent and a normal on a trig curve
Find the equations of the tangent and the normal to y = x sin x at the point where x = π/2.
At x = π/2, y = (π/2) × 1 = π/2.
Product rule: dy/dx = sin x + x cos x. At x = π/2, dy/dx = 1 + (π/2) × 0 = 1.
Tangent: y − π/2 = 1(x − π/2), so y = x.
Normal: gradient −1, so y − π/2 = −(x − π/2), giving y = π − x.
The normal is perpendicular to the tangent, so its gradient is −1 divided by the tangent's gradient. Exact values in radians, such as cos(π/2) = 0, are needed here on the non-calculator paper.
Worked example 4: stationary point and its nature
Find the stationary point of y = 2x + 8/x², for x > 0, and use the second derivative to determine its nature.
Write y = 2x + 8x⁻². Then:
- dy/dx = 2 − 16x⁻³ = 2 − 16/x³
- d²y/dx² = 48x⁻⁴ = 48/x⁴
dy/dx = 0 gives x³ = 8, so x = 2 and y = 4 + 8/4 = 6.
At x = 2, d²y/dx² = 48/16 = 3, which is positive, so (2, 6) is a minimum point.
The syllabus expects full justification: state the value of d²y/dx² and say what its sign means. Writing "minimum" without the reason loses the mark.
Non-calculator and calculator handling
On Paper 1, derivatives are found by hand and evaluated at exact points such as x = π/4 or x = e, so you need exact trig values in radians and facts like ln e = 1 and e⁰ = 1. On Paper 2, the same rules are used, but gradients and coordinates may be decimals to 3 significant figures. Keep the calculator in radian mode for any trig calculus, as the syllabus says angles will always be in radians there.
Mistakes our tutors see
- Differentiating √x or 1/x² without rewriting as powers.
- Forgetting the chain-rule factor, for example writing cos 3x as the derivative of sin 3x instead of 3 cos 3x.
- Quotient rule numerator in the wrong order. It is v du/dx − u dv/dx.
- Derivative of cos x written as sin x, missing the minus sign.
- Using degrees in trig calculus.
- Substituting the x-value before differentiating, which always gives zero.
- Stating the nature of a stationary point without a reason.
When to get help with differentiation
- You know the rules separately but cannot tell which one a question needs.
- Products inside a chain, such as x²e³ˣ, take you several attempts.
- Your answers are right but unsimplified, and later parts become unmanageable.
- Trig derivatives feel uncertain because you are not secure with radians.
Self-check
- Differentiate 4x³ − 6/x + √x.
- Differentiate e⁵ˣ⁻².
- Differentiate x ln x.
- Differentiate (sin 2x)/x.
- Find the stationary point of y = x² − 6x + 11 and state its nature.
Answers. 1: 12x² + 6/x² + 1/(2√x). 2: 5e⁵ˣ⁻². 3: ln x + 1. 4: (2x cos 2x − sin 2x)/x². 5: dy/dx = 2x − 6 = 0 at x = 3, y = 2; d²y/dx² = 2 > 0, so (3, 2) is a minimum.
Where this leads
Integration, the reverse process, follows directly; see our 0606 integration guide. For mixed timed questions, try the 0606 calculus practice set. If you have come from 2D vectors, note that velocity in calculus is the rate of change of displacement, which links the two.
In IB AA and A level, differentiation extends to implicit and parametric curves, inflexion points and harder optimisation; see our IB AA calculus guide.
How Maths Bodhi helps
Our tutors test the derivative table and the three rules at the start of every calculus block, then move to mixed questions where the student must choose the rule. In the free demo, one chain-rule and one product-rule question show quickly where the gaps are. Students outside Gurgaon can join online one-to-one IGCSE sessions.
Home tuition is available in Gurgaon (Gurugram). Students elsewhere in India and abroad learn with us online. You can book a free demo class.
Written and checked by the Maths Bodhi team. Facts checked against official Cambridge International and Pearson sources, November 2026.
Frequently asked questions
- What differentiation is in IGCSE Additional Maths?
- Topic 14 of 0606 includes derivatives of xⁿ, sin x, cos x, tan x, eˣ and ln x, the chain, product and quotient rules, tangents and normals, stationary points, rates of change, small increments and practical maximum and minimum problems.
- Are calculus formulas given in the 0606 exam?
- No. The syllabus states that no formulas are given in the List of formulas for the calculus section, so you must learn the standard derivatives and the rules.
- Is differentiation from first principles in 0606?
- No. Only an informal understanding of the idea of a limit is expected, and differentiation from first principles is not required.
- Do I need the quotient rule for 0606?
- Yes. The syllabus includes differentiating products and quotients, so you should know both the product rule and the quotient rule.
- Why must angles be in radians when differentiating trig functions?
- The results such as d/dx(sin x) = cos x are only true when x is measured in radians. The 0606 syllabus says angles in trig calculus will always be in radians.
