Differentiation is the newest-feeling topic in IGCSE maths for most students, yet the questions are among the most predictable on an Extended paper. Learn one rule, practise finding where the gradient is zero, and you can collect these marks every time. This page gives you eleven original questions in the style of Cambridge 0580, arranged in four stages, with a full solution under each.
Differentiation (E2.12) is Extended only. The syllabus covers estimating gradients by drawing tangents, differentiating axⁿ where n is a positive integer or zero (with sums of up to three such terms), and using derivatives for gradients and stationary points. You may tell maxima from minima by any method: an accurate sketch, the second derivative, or the gradient either side. Points of inflection are not required, and dy/dx notation is expected. Everything here can be done without a calculator. If differentiation is the topic you avoid, a Cambridge IGCSE maths tutor for Extended 0580 can usually make it routine within a few lessons.
Marking notes are our own summary: M for method, A for accuracy that depends on the method, B for an independent mark.
Stage 1: the rule
The rule: if y = axⁿ, then dy/dx = naxⁿ⁻¹. A constant term differentiates to 0.
Q1. Find dy/dx when y = 4x³ − 5x² + 7x − 2. [2]
Solution: Each term separately: 12x² − 10x + 7 − 0, so dy/dx = 12x² − 10x + 7.
Marking: B2 for all terms correct; B1 for two or three correct.
Q2. y = (2x − 1)(x + 3). Find dy/dx. [2]
Solution: Expand first: y = 2x² + 5x − 3. Then dy/dx = 4x + 5.
Marking: M1 for expanding; A1. You cannot differentiate each bracket separately and multiply the results.
Q3. y = (x⁴ + 3x²)/x. Find dy/dx. [2]
Solution: Divide each term by x: y = x³ + 3x. Then dy/dx = 3x² + 3.
Marking: M1 for simplifying into separate powers of x; A1.
Stage 2: gradients and tangents
Q4. Find the gradient of the curve y = x² − 6x + 1 at the point where x = 5. [2]
Solution: dy/dx = 2x − 6. At x = 5: 10 − 6 = 4.
Marking: M1 for differentiating; A1. The gradient comes from dy/dx, not from y: substituting into y gives −4, which is the y-coordinate.
Q5. Find the coordinates of the points on y = x³ − 5x where the gradient is 7. [3]
Solution: dy/dx = 3x² − 5. Set 3x² − 5 = 7, so 3x² = 12, x² = 4 and x = 2 or x = −2.
When x = 2, y = 8 − 10 = −2. When x = −2, y = −8 + 10 = 2. Points (2, −2) and (−2, 2).
Marking: M1 for setting dy/dx = 7; A1 for both x values; A1 for both points. Missing the negative square root loses a mark.
Q6. Find the equation of the tangent to y = x² − 4x + 7 at the point where x = 3. [3]
Solution: At x = 3, y = 9 − 12 + 7 = 4, so the point is (3, 4). dy/dx = 2x − 4, which is 2 at x = 3. Tangent: y − 4 = 2(x − 3), so y = 2x − 2.
Marking: B1 for the point; B1 for the gradient; A1 for the equation. This combines the gradient with the straight-line method from coordinate geometry.
Stage 3: stationary points
Q7. Find the stationary points of y = x³ − 3x² − 9x + 4 and determine their nature. [6]
Solution: dy/dx = 3x² − 6x − 9. Set it to zero: 3x² − 6x − 9 = 0, so x² − 2x − 3 = 0, (x − 3)(x + 1) = 0, and x = 3 or x = −1.
y at x = 3: 27 − 27 − 27 + 4 = −23. y at x = −1: −1 − 3 + 9 + 4 = 9.
Second derivative: d²y/dx² = 6x − 6. At x = 3 it is 12, which is positive, so (3, −23) is a minimum. At x = −1 it is −12, which is negative, so (−1, 9) is a maximum.
Marking: M1 for dy/dx = 0; A1 for both x values; A1 for both y values; M1 for a valid test; A1 for each correct nature. Divide the quadratic by 3 first: it makes the factorising easier.
Q8. y = x³ − 12x. Find the stationary points and use the gradient on either side of each to decide its nature. [5]
Solution: dy/dx = 3x² − 12 = 0, so x² = 4 and x = ±2. y(2) = 8 − 24 = −16 and y(−2) = −8 + 24 = 16.
Gradient either side of x = −2: at x = −3, dy/dx = 15 (positive); at x = −1, dy/dx = −9 (negative). Positive then negative means (−2, 16) is a maximum.
Either side of x = 2: at x = 1, dy/dx = −9; at x = 3, dy/dx = 15. Negative then positive means (2, −16) is a minimum.
Marking: M1 A1 for the x values; A1 for the points; M1 for testing gradients each side; A1 for both natures. Pick test values close to the stationary point, but not past the next one.
Q9. The curve y = ax² + bx has a stationary point at (2, −8). Find a and b. [4]
Solution: dy/dx = 2ax + b, which is 0 at x = 2: 4a + b = 0. The point lies on the curve: 4a + 2b = −8.
Subtract the first from the second: b = −8. Then 4a = 8, so a = 2 and b = −8.
Check: y = 2x² − 8x gives y(2) = 8 − 16 = −8 and dy/dx = 4x − 8 = 0 at x = 2.
Marking: M1 for each equation; A1 for each value. Two pieces of information give two equations.
Stage 4: in context
These two place stationary points in a practical setting. Treat them as stretch practice.
Q10. A ball is thrown upwards. Its height after t seconds is h = 20t − 5t² metres. Use differentiation to find the greatest height. [3]
Solution: dh/dt = 20 − 10t = 0 gives t = 2. Then h = 40 − 20 = 20 m. The coefficient of t² is negative, so this is a maximum.
Marking: M1 for differentiating and setting to zero; A1 for t; A1 for 20 m.
Q11. A farmer has 120 m of fencing to make three sides of a rectangular pen, with a wall forming the fourth side. The two sides perpendicular to the wall are each x m long. (a) Show that the area is A = 120x − 2x². (b) Find the maximum area. [5]
Solution: (a) The side parallel to the wall is 120 − 2x, so A = x(120 − 2x) = 120x − 2x².
(b) dA/dx = 120 − 4x = 0, so x = 30. A = 30 × 60 = 1800 m². d²A/dx² = −4, which is negative, so this is a maximum.
Marking: B1 for (a) with the length 120 − 2x explained; M1 for differentiating and setting to zero; A1 for x = 30; A1 for 1800; B1 for showing it is a maximum.
Where differentiation marks go
- Differentiating the constant to something other than 0, or keeping it.
- Substituting into y when the question asked for the gradient.
- Forgetting the y-coordinate when asked for a stationary point.
- Stating "maximum" or "minimum" with no test shown.
- Differentiating a product or quotient without expanding or simplifying first.
The full method is in our differentiation guide for 0580. Stationary points tie in with sketching curves and their turning points, and Q6 relies on finding the equation of a straight line. Where E2.12 sits in the whole strand is shown in our 0580 algebra and graphs overview.
Next, try the unstructured problem-solving set, where you choose the method yourself, or revisit accuracy rules with the bounds and proportion questions. Additional Maths students will meet the same ideas in more depth through 0606 applications of differentiation.
Send us the questions you got wrong
Note the stage where you started dropping marks, then send your working on WhatsApp (use the WhatsApp button on this page), or bring it to a free demo class. We will pick up from that stage rather than starting from the rule again.
How Maths Bodhi helps
- A free demo that checks whether differentiation errors come from the rule or from the algebra around it.
- A tutor matched to 0580, 0606, 0607, 4MA1 or 4PM1.
- Exam-style calculus questions each week, with every test of nature written out.
- Final-year students can work with a Class 10 IGCSE maths tutor at home in Gurgaon or online.
Home tuition is available in Gurgaon (Gurugram). Students elsewhere in India and abroad learn with us online. You can book a free demo class.
Written and checked by the Maths Bodhi team. Facts checked against official Cambridge International and Pearson sources, November 2026.
Frequently asked questions
- Is differentiation in IGCSE Core maths?
- No. In Cambridge 0580, differentiation (E2.12) is Extended only.
- What differentiation do I need for IGCSE 0580?
- Differentiating axⁿ where n is a positive integer or zero, with sums of up to three terms, then using dy/dx for gradients and stationary points, and telling maxima from minima.
- How do I tell a maximum from a minimum in IGCSE?
- Any method is accepted: an accurate sketch, the sign of the second derivative, or the sign of the gradient either side of the stationary point.
- Do I need points of inflection for IGCSE maths?
- No. The 0580 syllabus says candidates are not expected to identify points of inflection.
- What is a stationary point?
- A point on a curve where the gradient dy/dx is zero; in 0580 these are turning points, either maximum or minimum.
- Are these differentiation questions from past papers?
- No. They are original questions written by the Maths Bodhi team in the exam style.
