A vector has both size and direction. In Cambridge IGCSE Mathematics 0580, E7.2 Vectors in two dimensions asks Extended students to describe a translation with a vector, add and subtract vectors, and multiply a vector by a scalar; E7.3 Magnitude of a vector asks them to find the length of a vector (x, y) as √(x² + y²). Both are Extended content only. Core students meet column vectors only as the way to describe a translation.
These two sub-topics are the arithmetic that vector geometry proofs are built on, so it pays to make them automatic. This guide covers notation, the rules, four worked examples and a self-check. For one-to-one help aimed at the Extended papers, see our Extended-tier 0580 maths tutors.
A note on layout. A column vector is written with the x-component on top and the y-component underneath, inside tall brackets. Web pages cannot show that neatly, so on this page a column vector appears on one line as (x, y). In your exam answers, always write it as a column.
Notation you must recognise
Cambridge says vectors will be printed in one of these forms:
- A column vector: x on top, y underneath.
- AB with an arrow over it: the vector from point A to point B.
- A bold lower-case letter, such as a.
When you write by hand you cannot do bold, so underline the letter. The magnitude (length) is shown with modulus signs: |a| is the magnitude of a, and |AB| is the magnitude of AB. Where these sub-topics sit in the strand is set out in our guide to the 0580 transformations and vectors topics.
The rules
| Operation | Rule | Example |
|---|---|---|
| Add | Add the components | (3, −2) + (−1, 5) = (2, 3) |
| Subtract | Subtract the components | (3, −2) − (−1, 5) = (4, −7) |
| Multiply by a scalar k | Multiply each component by k | 3 × (3, −2) = (9, −6) |
| Negative of a vector | Change both signs; same length, opposite direction | −(3, −2) = (−3, 2) |
| Magnitude | √(x² + y²) | Magnitude of (6, 8) = √100 = 10 |
| Vector from A to B | Position of B minus position of A | A(1, 2), B(4, 7): AB = (3, 5) |
Parallel vectors. Two vectors are parallel if one is a scalar multiple of the other. (4, −6) and (−2, 3) are parallel because (4, −6) = −2 × (−2, 3). The negative scalar means they point in opposite directions.
Non-calculator and calculator handling
Vector arithmetic is integer work, so most of it suits Paper 2. The difference shows up in magnitudes: on the non-calculator paper, leave answers such as √13 or 2√5 as surds (our guide to simplifying surds shows how). On Paper 4, give a decimal to 3 significant figures unless the question asks for an exact answer.
Worked example 1: combining vectors
a = (3, −2) and b = (−1, 5). Find (a) 2a − 3b and (b) |a + b|.
(a) 2a = (6, −4) and 3b = (−3, 15).
2a − 3b = (6 − (−3), −4 − 15) = (9, −19)
(b) a + b = (3 + (−1), −2 + 5) = (2, 3)
The magnitude |a + b| = √(2² + 3²) = √13 = √13 exactly, or 3.61 (3 s.f.)
Notice that |a + b| is not |a| + |b|. Here |a| = √13 and |b| = √26, and their sum is about 8.71, much more than 3.61. Lengths only add like that when the vectors point the same way.
Worked example 2: vectors between points
A is the point (−2, 1) and B is the point (4, 9). Find (a) the vector AB, (b) |AB| and (c) the vector BA.
(a) AB = B − A = (4 − (−2), 9 − 1) = (6, 8)
(b) |AB| = √(6² + 8²) = √100 = 10
(c) BA is the same journey in reverse: (−6, −8)
The magnitude in (b) is the same as the distance between the points, found with Pythagoras' rule, c² = a² + b². That is not a coincidence; magnitude is Pythagoras applied to the two components.
Worked example 3: finding unknown scalars
Find p and q such that p(2, 3) + q(1, −1) = (7, 3).
Write one equation for each component.
- Top: 2p + q = 7
- Bottom: 3p − q = 3
Add the equations to eliminate q: 5p = 10, so p = 2.
Substitute: 2(2) + q = 7, so q = 3.
p = 2, q = 3
Check: 2(2, 3) + 3(1, −1) = (4, 6) + (3, −3) = (7, 3). Correct.
This is the vector form of simultaneous equations, a skill that comes up again in vector geometry when you match coefficients of a and b.
Worked example 4: unknown components
(a) The vector (k, 12) has magnitude 13. Find the possible values of k.
√(k² + 12²) = 13, so k² + 144 = 169 and k² = 25.
k = 5 or k = −5
Both are valid: one vector points right, the other left, and both have length 13.
(b) The vector (m, 6) is parallel to (2, −3). Find m.
Parallel means (m, 6) = t(2, −3) for some scalar t. From the bottom components, 6 = −3t, so t = −2. Then m = 2t = −4.
Describing a translation with a vector
A translation by the vector (x, y) moves every point x units right and y units up (negative values mean left or down). If triangle P is translated by a and then by b, the single translation that does both is a + b. That is the link between this sub-topic and E7.1; for the other three transformations, see our guide on describing transformations fully.
Common mistakes our tutors see
- Writing column vectors as coordinates, with a comma and round brackets on one line, in exam answers.
- Sign errors when subtracting a negative component: 3 − (−1) is 4, not 2.
- Adding magnitudes, as if |a + b| = |a| + |b|.
- AB found as A − B, which gives BA instead.
- Squaring a negative component wrongly: (−5)² is 25, not −25.
- Only one answer when a magnitude equation gives k² = 25.
- Not underlining vector letters in handwritten work, so the vector a and the number a look the same.
When to get help with vectors
- The arithmetic is fine, but your child cannot connect a vector to a movement on a diagram.
- Sign errors keep appearing, which usually points to weak negative-number arithmetic rather than vectors.
- They can do column vectors but freeze when the same ideas are written with letters (a and b), which is the step into vector geometry.
- Vector questions are being skipped in past papers.
The step from numbers to letters is where most Extended students need guidance, and it is easier with someone drawing the routes alongside them.
Self-check
- u = (5, −2) and v = (−3, 4). Find u − 2v.
- Find the magnitude of (−7, 4), giving your answer to 3 significant figures.
- P is (3, −1) and Q is (−2, 11). Find PQ and |PQ|.
- Find k if (k, 10) is parallel to (3, 5).
- Find m and n such that m(1, 2) + n(3, −1) = (10, −1).
Answers. 1: (5 + 6, −2 − 8) = (11, −10). 2: √(49 + 16) = √65 = 8.06. 3: PQ = (−5, 12), |PQ| = √(25 + 144) = 13. 4: (k, 10) = 2(3, 5), so k = 6. 5: m + 3n = 10 and 2m − n = −1 give m = 1, n = 3.
Where column vectors lead
The next sub-topic, E7.4, uses exactly these rules with letters instead of numbers, to prove that lines are parallel or that points lie on a straight line; our IGCSE vector geometry guide is the natural next read. In IGCSE Additional Mathematics, vectors gain unit vectors, i and j notation and velocity problems; see our Additional Maths vectors guide.
How Maths Bodhi helps
Our tutors build vectors in two stages: numbers first, until the arithmetic is clean, then letters and diagrams. The free demo includes a short vectors check so the tutor can see which stage your child is at. For students in their final IGCSE year, our Class 10 IGCSE maths home tuition includes regular mixed practice so vectors stay sharp alongside the rest of the course.
Home tuition is available in Gurgaon (Gurugram). Students elsewhere in India and abroad learn with us online. You can book a free demo class.
Written and checked by the Maths Bodhi team. Facts checked against official Cambridge International and Pearson sources, November 2026.
Frequently asked questions
- Are column vectors in IGCSE Core maths?
- Only for describing translations. Adding, subtracting and multiplying vectors by a scalar, and finding magnitude, are Extended content (E7.2 and E7.3).
- How do you find the magnitude of a vector in IGCSE?
- For a column vector with components x and y, the magnitude is √(x² + y²). It is written with modulus signs, such as |a|.
- How do you add column vectors?
- Add the top components together and the bottom components together. Subtracting and multiplying by a scalar also work component by component.
- How do you know if two vectors are parallel?
- Two vectors are parallel if one is a number multiple of the other, for example (4, −6) = −2 × (−2, 3). A negative multiple means opposite directions.
- How do I write a vector in the IGCSE exam?
- Write column vectors as a column with x on top and y below. For single-letter vectors, underline the letter, since you cannot write in bold.
- How do you find the vector from A to B?
- Subtract the position of A from the position of B. For A(1, 2) and B(4, 7), the vector AB has components 3 and 5.
