WhatsApp us
IGCSE Maths18 Nov 2026

IGCSE Transformations (0580 E7.1): How to Describe a Transformation Fully, With Worked Examples

Reflection, rotation, enlargement and translation for Cambridge IGCSE 0580 (C7.1 and E7.1): the details a full description needs, how to find a centre of rotation or enlargement, negative scale factors and combined transformations, with four worked examples and a self-check.

IGCSE Transformations (0580 E7.1): How to Describe a Transformation Fully, With Worked Examples

To describe a transformation fully in IGCSE maths, name it and give every detail that pins it down: a reflection needs the equation of the mirror line; a rotation needs the centre, the angle and the direction; an enlargement needs the centre and the scale factor; a translation needs the column vector. In Cambridge IGCSE Mathematics 0580 this is sub-topic 7.1, Transformations, and it is on both tiers, though Extended questions go further than Core ones.

When a question says "describe fully the single transformation", it means one transformation only. Giving two, such as "a reflection and then a translation", scores nothing even if the combination works. This guide gives the checklist, the methods for finding centres, and four worked examples. If you would like a tutor to work through transformation questions with your child, see our IGCSE maths tutors for Cambridge 0580.

Core and Extended: what each tier covers

Core (C7.1)Extended (E7.1)
ReflectionIn a vertical or horizontal lineIn any straight line
RotationAbout the origin, a vertex or the midpoint of an edge; multiples of 90°About any centre; multiples of 90°
EnlargementPositive and fractional scale factorsAlso negative scale factors
TranslationBy a column vectorBy a column vector
CombinationsNot examinedMay be examined

Both tiers must use a ruler for all straight edges, and tracing paper can be requested in the exam room. The rest of the strand, from column vectors to vector proofs, is mapped on our transformations and vectors overview.

The full-description checklist

TransformationMust stateExample of a full answer
ReflectionThe word "reflection" and the mirror line's equationReflection in the line y = −1
Rotation"Rotation", angle, direction, centreRotation 90° clockwise about (2, 0)
Enlargement"Enlargement", scale factor, centreEnlargement, scale factor −2, centre (1, 1)
Translation"Translation" and the column vectorTranslation by the vector with top −3 and bottom 2

Use the exact words. "Flip", "turn", "move" and "shrink" are not accepted names. A rotation of 180° does not need a direction, because clockwise and anticlockwise give the same result. An enlargement with a scale factor between 0 and 1 is still called an enlargement, even though the shape gets smaller.

Non-calculator and calculator handling

Transformations appear on any of the four papers. There is almost no arithmetic, so a calculator does not help; what matters is accurate drawing on the grid, correct coordinates and complete wording. On every paper, check each image vertex by counting squares from the centre or line, and draw edges with a ruler.

Worked example 1: reflection in a sloping line (Extended)

Triangle P has vertices (2, 1), (4, 1) and (2, 4). Triangle Q has vertices (1, 2), (1, 4) and (4, 2). Describe fully the single transformation that maps P onto Q.

Compare the coordinates: (2, 1) goes to (1, 2), (4, 1) goes to (1, 4), (2, 4) goes to (4, 2). Each time, x and y swap.

Swapping coordinates is the rule for a reflection in the line y = x. Check one point geometrically: the midpoint of (2, 1) and (1, 2) is (1.5, 1.5), which lies on y = x, and the segment joining them is perpendicular to y = x.

Reflection in the line y = x.

Core questions only use vertical and horizontal mirror lines, such as x = 3 or y = −1. If the line equations are not secure, our guide to the equation of a straight line helps.

Worked example 2: rotations and how to find the centre

Triangle P has vertices (2, 1), (4, 1) and (2, 4).

(a) Rotate P through 90° anticlockwise about the origin.

For 90° anticlockwise about (0, 0), each point (x, y) moves to (−y, x).

(2, 1) → (−1, 2); (4, 1) → (−1, 4); (2, 4) → (−4, 2).

In the exam you would usually use tracing paper: trace the shape and the axes, put your pencil on the centre, turn the paper a quarter turn anticlockwise and mark the new vertices.

(b) Triangle R has vertices (4, −1), (2, −1) and (4, −4). Describe fully the single transformation that maps P onto R.

The shape has been turned upside down, so try a rotation of 180°. For a 180° rotation, the centre is the midpoint of any point and its image.

  • Midpoint of (2, 1) and (4, −1): (3, 0)
  • Midpoint of (4, 1) and (2, −1): (3, 0)
  • Midpoint of (2, 4) and (4, −4): (3, 0)

All three agree. Rotation through 180° about (3, 0).

For a 90° rotation with an unknown centre, use tracing paper and trial points, or draw the perpendicular bisectors of two lines joining points to their images; they cross at the centre.

Worked example 3: enlargement with a negative scale factor (Extended)

Triangle T has vertices (2, 2), (4, 2) and (2, 3). Its image T′ has vertices (−1, −1), (−5, −1) and (−1, −3). Describe fully the single transformation that maps T onto T′.

Scale factor. The side from (2, 2) to (4, 2) has length 2. The matching side from (−1, −1) to (−5, −1) has length 4. So the size factor is 2. The image is upside down and on the opposite side, so the scale factor is negative: −2.

Centre. Draw lines through each vertex and its image; they meet at the centre.

  • (2, 2) and (−1, −1) both lie on the line y = x.
  • (4, 2) and (−5, −1): this line has gradient 3/9 = 1/3 and meets y = x at (1, 1).

Enlargement, scale factor −2, centre (1, 1).

Check one vertex: from (1, 1) to (4, 2) is 3 right and 1 up. Multiply by −2: 6 left and 2 down, landing at (−5, −1). Correct.

With a negative scale factor, each image point is on the opposite side of the centre, at the scale factor times the distance. Core questions use only positive and fractional scale factors.

Worked example 4: a combined transformation (Extended)

Triangle P, with vertices (2, 1), (4, 1) and (2, 4), is reflected in the x-axis and the result is rotated through 90° clockwise about the origin. Describe fully the single transformation that is equivalent to these two.

Reflect in the x-axis: (x, y) → (x, −y), giving (2, −1), (4, −1), (2, −4).

Rotate 90° clockwise about (0, 0): (x, y) → (y, −x), giving (−1, −2), (−1, −4), (−4, −2).

Compare with P: (2, 1) has become (−1, −2). Each point (x, y) has become (−y, −x). That is the rule for a reflection in the line y = −x.

Reflection in the line y = −x.

The order matters. Doing the rotation first and then the reflection gives a different image, so follow the order in the question.

Translations and column vectors

A translation slides a shape without turning it. The column vector gives the movement: the top number is the change in x (positive means right), and the bottom number is the change in y (positive means up). If P moves to the triangle with vertices (−1, 3), (1, 3) and (−1, 6), every point has moved 3 left and 2 up, so the vector has top −3 and bottom 2.

Column vectors are where this sub-topic hands over to vector arithmetic; our guide to column vectors picks up from here for Extended students.

Common mistakes our tutors see

  1. Two transformations for a "single transformation" question.
  2. Missing details: a rotation without a centre or direction, an enlargement without a centre.
  3. x = and y = mixed up: reflecting in x = 2 (a vertical line) when the question says y = 2.
  4. Wrong direction of rotation. Clockwise and anticlockwise are easy to swap when counting quarter turns.
  5. Negative scale factor image on the same side of the centre.
  6. Column vectors written as coordinates, with brackets and a comma instead of a column.
  7. No ruler, which the syllabus requires for straight edges.

When to get help with transformations

  • Your child can draw an image but cannot describe one, or the other way round.
  • Rotations about points other than the origin are often wrong.
  • Extended work on negative scale factors and combinations is avoided.
  • Descriptions regularly lose one mark for a missing detail, even when the transformation is right.

These are habit problems, and a tutor watching a few questions can usually fix them quickly.

Self-check

  1. Describe fully the single transformation that maps (1, 1), (3, 1), (1, 2) onto (1, −1), (3, −1), (1, −2).
  2. Describe fully the single transformation that maps (1, 2), (3, 2), (3, 5) onto (4, 0), (6, 0), (6, 3).
  3. Describe fully the single transformation that maps (4, 2), (8, 2), (4, 6) onto (2, 1), (4, 1), (2, 3).
  4. The point (3, 1) is rotated through 90° clockwise about the origin. Find its image.
  5. The point (5, 3) is reflected in the line x = 2. Find its image.

Answers. 1: Reflection in the x-axis (the line y = 0). 2: Translation by the vector with top 3 and bottom −2. 3: Enlargement, scale factor ½, centre (0, 0). 4: (1, −3). 5: (−1, 3).

Where transformations lead

Enlargement connects straight to similar shapes, where the scale factor also controls area and volume; see our guide to similarity and scale factors for area and volume. Vector geometry, the last part of the strand, uses the same "move along a route" idea in algebra; our guide to vector proofs shows how. In Cambridge IGCSE International Mathematics and later courses, transformations are applied to graphs instead of shapes, as in our 0607 guide to functions and transformations.

How Maths Bodhi helps

Our tutors give every student the full-description checklist in the first session and then practise until it is automatic, starting with the tier your child is entered for. The free demo includes one drawing and one "describe fully" question so the tutor can see which habit needs work. Families anywhere can learn with our online tutors for IGCSE maths using a shared digital grid.

Home tuition is available in Gurgaon (Gurugram). Students elsewhere in India and abroad learn with us online. You can book a free demo class.

Written and checked by the Maths Bodhi team. Facts checked against official Cambridge International and Pearson sources, November 2026.

Frequently asked questions

How do you describe a rotation fully in IGCSE maths?
State that it is a rotation, give the angle, the direction (clockwise or anticlockwise, not needed for 180°) and the coordinates of the centre.
What does "single transformation" mean in IGCSE maths?
It means one transformation only. Describing two transformations that together give the same result scores no marks.
Are negative scale factors in IGCSE Core maths?
No. Core uses positive and fractional scale factors only. Negative scale factors are part of the Extended syllabus, E7.1.
How do you find the centre of enlargement?
Draw straight lines through each vertex and its matching image vertex. The point where the lines meet is the centre of enlargement.
Can I use tracing paper in IGCSE maths?
Cambridge says tracing paper may be requested during the exam, but you cannot bring your own. It is useful for rotations and reflections.
Is an enlargement with scale factor ½ still called an enlargement?
Yes. In IGCSE maths a scale factor between 0 and 1 makes the shape smaller, but the transformation is still described as an enlargement.
IGCSE transformationsdescribe fully transformationnegative scale factor enlargement0580 E7.1IGCSE maths tutor

Related guides

Keep exploring this maths topic

IGCSE Maths18 Nov 2026

IGCSE Maths Transformations and Vectors Topics (0580 E7): What Core and Extended Students Need

The four sub-topics of Cambridge IGCSE 0580 topic 7, Transformations and vectors, with their syllabus references, exactly where Core stops and Extended carries on, what changed in 2025, how the strand is examined on the non-calculator and calculator papers, and a study order.

IGCSE vectorsIGCSE transformations0580 E7IGCSE Extended maths

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Vectors Questions: 11 Practice Questions on Vectors and Transformations with Answers

Eleven original IGCSE 0580 questions on transformations and vectors, from translations and describing rotations to magnitude, collinearity and ratio proofs, with full worked solutions and marking notes.

IGCSE vectors practiceIGCSE transformations questionsvector geometry IGCSE0580 vectors

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

Edexcel IGCSE Vectors and Transformations: Vector Proofs, Magnitude and Describing Transformations (4MA1)

Heading 5 of 4MA1: vectors (Higher only) and transformation geometry (both tiers). Column vectors, magnitude, vector geometry proofs, and full descriptions of rotations, reflections, translations and enlargements, with four worked examples.

Edexcel IGCSE vectors4MA1 transformationsvector geometry proofsdescribing transformations IGCSE

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Vectors (0580 E7.2–E7.3): Column Vectors, Vector Arithmetic and Magnitude

Column vectors for Cambridge IGCSE 0580 Extended: notation, adding, subtracting and multiplying by a scalar (E7.2), the magnitude √(x² + y²) (E7.3), parallel vectors and solving for unknowns, with four worked examples and a self-check.

IGCSE vectorscolumn vectorsmagnitude of a vector0580 E7.2 and E7.3

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Vector Geometry (0580 E7.4): Midpoints, Ratios, Parallel Lines and Collinear Points

Vector geometry for Cambridge IGCSE 0580 Extended (E7.4): writing routes in terms of a and b, position vectors, points that divide a line in a ratio, and how to prove lines parallel or points collinear, with the sentences that earn the final mark. Four worked examples and a self-check.

IGCSE vector geometrycollinear vectors proofvectors ratio questions0580 E7.4

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Similarity: Similar Triangles and the Area and Volume Scale Factors k² and k³ (0580 E4.4)

Similar shapes for Cambridge IGCSE 0580: finding lengths with the scale factor k, proving two triangles are similar with reasons, and using k² for areas and k³ for volumes, including the reverse questions that start from an area or a volume. Four original worked examples.

IGCSE similaritysimilar triangles IGCSEarea and volume scale factorsimilar solids

By Maths Bodhi Team

Read guide