WhatsApp us
IGCSE Maths18 Nov 2026

IGCSE Additional Maths Kinematics (0606): Displacement, Velocity and Acceleration with Calculus

Straight-line motion in Cambridge 0606: differentiate displacement to get velocity and acceleration, integrate back with a starting condition, find when a particle is at rest, tell distance from displacement, and sketch the five motion graphs. Four worked examples with polynomial, exponential and trigonometric motion.

IGCSE Additional Maths Kinematics (0606): Displacement, Velocity and Acceleration with Calculus

Kinematics in IGCSE Additional Maths is calculus applied to a particle moving in a straight line. Differentiate displacement s to get velocity v, and differentiate v to get acceleration a. To go the other way, integrate and use a starting condition to find the constant. Almost every question then asks one of four things: when the particle is at rest, where it is, how far it has travelled, or what its graph looks like.

Kinematics joins two calculus skills in one question, so it rewards students who are secure in both. Our Cambridge 0606 tutors often use it as a check on the whole of Topic 14.

What the syllabus says

Kinematics sits at the end of Topic 14, Calculus, in the 0606 syllabus for 2025–2027:

  • 14.14 Apply differentiation and integration to kinematics problems involving displacement, velocity and acceleration of a particle moving in a straight line, with variable or constant acceleration.
  • 14.15 Use these relationships to draw and use displacement–time, distance–time, velocity–time, speed–time and acceleration–time graphs.

There are no tiers in 0606, so every candidate covers both points. No calculus formulas appear on the List of formulas. The rest of the topic list is in our 0606 syllabus overview.

The one diagram to remember

Go this wayDo this
s → v → aDifferentiate: v = ds/dt, a = dv/dt
a → v → sIntegrate, then use a known value (often "starts from rest" or "starts at O") to find c
At restv = 0
Returns to Os = 0 (for t greater than 0)
Maximum velocitya = 0

Words matter as much as symbols. "Initially" means t = 0. "Starts from O" means s = 0 when t = 0. "From rest" means v = 0 when t = 0.

Non-calculator or calculator?

On Paper 1, kinematics usually uses polynomials in t with whole-number times, or exact answers with e and ln. On Paper 2, expect exponential motion such as v = 10e^(−0.2t), or trigonometric motion in radians, with answers to 3 significant figures. Both papers expect the differentiation or integration to be written out.

Worked example 1: at rest, acceleration and distance

A particle moves in a straight line so that its displacement from a fixed point O after t seconds is s = t³ − 9t² + 24t metres. Find (a) the times when it is at rest, (b) its acceleration at t = 1, (c) the total distance travelled in the first 5 seconds.

(a) v = ds/dt = 3t² − 18t + 24 = 3(t − 2)(t − 4). At rest when v = 0: t = 2 s and t = 4 s.

(b) a = dv/dt = 6t − 18. At t = 1, a = −12 m/s². The negative sign means the particle is slowing down while moving forward at that moment.

(c) The particle changes direction at t = 2 and t = 4, so split the journey there:

t0245
s0201620

Distance = 20 + |16 − 20| + |20 − 16| = 20 + 4 + 4 = 28 m.

The displacement at t = 5 is only 20 m. Giving 20 for "distance travelled" is the single most common lost mark in this topic.

Worked example 2: exponential velocity (calculator)

A particle starts at O and moves with velocity v = 10e^(−0.2t) m/s. Find (a) its acceleration when t = 3, (b) its displacement from O when t = 5, (c) what happens to its displacement as t becomes large.

(a) a = dv/dt = −2e^(−0.2t). At t = 3, a = −2e^(−0.6) = −1.10 m/s² (3 s.f.).

(b) s = ∫10e^(−0.2t) dt = −50e^(−0.2t) + c. At t = 0, s = 0, so 0 = −50 + c and c = 50.

s = 50 − 50e^(−0.2t). At t = 5, s = 50 − 50e^(−1) = 31.6 m (3 s.f.).

(c) e^(−0.2t) approaches 0, so s approaches 50 m. The velocity is always positive, so the particle never turns back and never quite reaches 50 m.

Forgetting to find c is the trap here. Without it, s at t = 5 comes out as −18.4, which is clearly not possible for a particle that only moves forward.

Worked example 3: trigonometric motion

A particle starts at O with velocity v = 3 cos 2t m/s, where t is in seconds and the angle is in radians. Find (a) the first time the particle is at rest, (b) its displacement and acceleration at that time.

(a) 3 cos 2t = 0 when 2t = π/2, so t = π/4 s.

(b) s = ∫3 cos 2t dt = (3/2) sin 2t + c. At t = 0, s = 0, so c = 0. At t = π/4, s = (3/2) sin(π/2) = 1.5 m.

a = dv/dt = −6 sin 2t. At t = π/4, a = −6 m/s².

This one works on either paper because the angles are exact. On Paper 2, check the calculator is in radians before you start.

Worked example 4: from acceleration back to displacement

A particle moves from O with acceleration a = 6t − 4 m/s². Its initial velocity is 3 m/s. Show that the particle is never at rest, and find its displacement at t = 2.

v = ∫(6t − 4) dt = 3t² − 4t + c. With v = 3 at t = 0, c = 3, so v = 3t² − 4t + 3.

For v = 0: the discriminant is (−4)² − 4 × 3 × 3 = 16 − 36 = −20, which is negative. So v = 0 has no real roots and the particle is never at rest.

s = ∫(3t² − 4t + 3) dt = t³ − 2t² + 3t + c, and c = 0 because it starts at O. At t = 2, s = 8 − 8 + 6 = 6 m.

The "show that" uses the discriminant from Topic 2. 0606 likes to mix topics like this, so a quadratic skill can carry a kinematics mark.

Sketching the motion graphs

Syllabus point 14.15 lists five graphs. Each comes from the one before it:

  • Displacement–time: plot s against t. Turning points are where v = 0.
  • Distance–time: the same as displacement–time until the particle turns. After that, distance keeps increasing while displacement falls.
  • Velocity–time: the gradient is the acceleration, and the signed area under it is the displacement.
  • Speed–time: speed is |v|, so reflect any part of the velocity graph below the axis to above it. Expect a cusp where v = 0.
  • Acceleration–time: for a cubic s, this is a straight line.

When sketching, label where the graph meets the axes and the coordinates of turning points. Cambridge's conventions say a sketch need not be to scale but must show these key features.

Common mistakes our tutors see

  1. Distance and displacement treated as the same. Always check for a change of direction first.
  2. No constant of integration, or c found from the wrong condition.
  3. "At rest" set as s = 0 instead of v = 0.
  4. Calculator in degrees for trigonometric motion.
  5. Negative acceleration read as "moving backwards". It means the velocity is decreasing, which is a different thing.
  6. Units left off or mixed up, such as m/s for an acceleration. The syllabus expects you to recognise the notation m s⁻¹ and m s⁻², which mean the same as m/s and m/s².

When to get help

Signs a student would benefit from a tutor on this topic:

  • They can differentiate s but stall when a question starts from a or v.
  • Distance-travelled answers are often wrong even when every calculation is right.
  • They cannot say in words what the particle is doing at a given time.
  • Speed–time and distance–time sketches look exactly like the velocity and displacement graphs.

These are usually gaps in reading the motion, not in calculus. A tutor fixes them by asking the student to describe the journey aloud before writing anything.

Self-check

  1. s = 2t³ − 3t². Find v and a when t = 2.
  2. v = 4t − t² and the particle starts at O. When is it at rest, and what is its displacement then (t greater than 0)?
  3. v = 2 sin t, starting at O. Find s when t = π.
  4. v = 12 − 3t², starting at O. Find the distance travelled in the first 3 seconds.

Answers.

  1. v = 6t² − 6t = 12 m/s; a = 12t − 6 = 18 m/s².
  2. v = t(4 − t) = 0 at t = 4. s = 2t² − t³/3, so s = 32 − 64/3 = 32/3 m, about 10.7 m.
  3. s = −2 cos t + 2 (since s = 0 at t = 0). At t = π, s = 2 + 2 = 4 m.
  4. v = 0 at t = 2. s = 12t − t³ gives s(2) = 16 and s(3) = 9. Distance = 16 + 7 = 23 m.

Where it leads

Kinematics depends on both halves of the calculus topic. If either feels shaky, go back to integration for 0606 or stationary points and rates of change. The graphs here extend the distance–time and speed–time graphs from 0580; our guide to reading 0580 travel graphs covers that starting point.

The same ideas continue in IB Mathematics and in A level Mechanics. Our IB kinematics guide shows how the IB version builds on this. For mixed calculus questions, use our Additional Maths calculus practice.

How Maths Bodhi helps

In the free demo, our tutor gives a short kinematics question and asks the student to describe the motion before calculating. That shows quickly whether the gap is in the calculus or in reading the situation. Tutors are matched to 0606, and progress is tracked through written method on exam-style questions. For other IGCSE codes too, see our IGCSE maths home tutors.

Home tuition is available in Gurgaon (Gurugram). Students elsewhere in India and abroad learn with us online. You can book a free demo class.

Written and checked by the Maths Bodhi team. Facts checked against official Cambridge International and Pearson sources, November 2026.

Frequently asked questions

Is kinematics in IGCSE Additional Maths?
Yes. Syllabus points 14.14 and 14.15 cover displacement, velocity and acceleration of a particle in a straight line, using differentiation and integration, and the five motion graphs.
How do I find when a particle is at rest?
Set the velocity equal to zero and solve for t. Do not set the displacement to zero; that finds when the particle is back at the starting point.
What is the difference between distance and displacement in 0606 kinematics?
Displacement is the position relative to O and can be negative. Distance is the total length travelled. If the particle changes direction, split the time at each point where v = 0 and add the sizes of each part.
How do I get displacement from velocity?
Integrate the velocity with respect to t, then use a starting condition, such as s = 0 when t = 0, to find the constant of integration.
Do 0606 kinematics questions use radians?
Yes, when the motion involves sin or cos. The syllabus says angles in calculus with trigonometric functions are always in radians.
What is a speed–time graph in Additional Maths?
It shows the size of the velocity. Draw the velocity–time graph and reflect any part below the time axis to above it.
0606 kinematicsdisplacement velocity accelerationparticle at restmotion graphs calculusIGCSE maths tutor

Related guides

Keep exploring this maths topic

IGCSE Maths18 Nov 2026

Edexcel IGCSE Differentiation: Gradients, Turning Points and Kinematics (4MA1 Higher)

Calculus in 4MA1 section 3.4, a Higher-only topic: differentiating integer powers of x, gradients and tangents, stationary points, simple optimisation and kinematics, with four worked examples and a self-check.

Edexcel IGCSE differentiation4MA1 calculusstationary points IGCSEkinematics differentiation

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Additional Maths Calculus Questions (0606): 12 Exam-Style Problems with Answers

Twelve original calculus questions in the style of Cambridge 0606, with suggested marks: chain, product and quotient rules, tangents, stationary points, rates of change, small increments, integration, areas, kinematics and a "hence" integral. Full worked answers with notes on method and accuracy marks.

0606 calculus practicedifferentiation questionsintegration questionskinematics questions 0606

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Speed–Time and Distance–Time Graphs: Gradient, Area and Acceleration (0580 E2.9)

Graphs in practical situations for Cambridge IGCSE 0580: travel and conversion graphs at Core, then speed–time graphs, acceleration, distance as area and tangents to curves at Extended, with four original worked examples and a self-check.

IGCSE speed time graphsdistance time graphsacceleration and area under a graph0580 E2.9

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Further Pure Maths Calculus (4PM1 Section 9): Product, Quotient and Chain Rules, Areas, Volumes and Rates of Change

Section 9 of Edexcel Further Pure Mathematics (4PM1): differentiating and integrating powers of x, sin ax, cos ax and eᵃˣ; product, quotient and chain rules; stationary points with justification; tangents and normals; kinematics; areas and volumes of revolution; connected rates of change and small changes.

further pure calculus4PM1 differentiationvolumes of revolution IGCSEconnected rates of change

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Additional Maths Vectors Questions (0606): Position Vectors, Geometry and Velocity

Nine original 0606-style vector questions in rising difficulty, with worked answers and mark notes: magnitude and unit vectors, position vectors and ratios, equating like vectors, a vector geometry intersection, position from a velocity vector, collision, a river crossing and closest approach.

0606 vectors practiceposition vectors questionsvelocity vectorsvector geometry 0606

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Additional Maths Integration (0606): Indefinite Integrals, Definite Integrals and Areas

Everything Cambridge 0606 asks you to integrate, from powers of x and 1/x to (ax + b)^n, e^(ax+b) and the trigonometric forms, plus definite integrals, "hence" questions and areas between a line and a curve. Four worked examples and a self-check.

0606 integrationdefinite integralsarea under a curveCambridge Additional Maths calculus

By Maths Bodhi Team

Read guide