WhatsApp us
IGCSE Maths18 Nov 2026

IGCSE Speed–Time and Distance–Time Graphs: Gradient, Area and Acceleration (0580 E2.9)

Graphs in practical situations for Cambridge IGCSE 0580: travel and conversion graphs at Core, then speed–time graphs, acceleration, distance as area and tangents to curves at Extended, with four original worked examples and a self-check.

IGCSE Speed–Time and Distance–Time Graphs: Gradient, Area and Acceleration (0580 E2.9)

On a distance–time graph, the gradient is the speed. On a speed–time graph, the gradient is the acceleration and the area underneath is the distance travelled. Those two sentences answer most travel-graph questions on the IGCSE papers. The rest is reading scales carefully and keeping units consistent.

In Cambridge IGCSE 0580 this is E2.9 Graphs in practical situations. Core uses and interprets travel graphs and conversion graphs, draws graphs from data and treats the gradient of a straight line as a rate of change. Extended adds speed–time graphs, acceleration and deceleration, distance as the area under a speed–time graph (straight sections only), and estimating the gradient of a curve by drawing a tangent. If graph questions are costing marks, our IGCSE maths tutors for Cambridge 0580 work on them with real grid paper, not just on a screen.

What each graph tells you

GraphGradient meansArea meansHorizontal line means
Distance–timeSpeedNothing usefulStationary (stopped)
Speed–timeAcceleration (negative = deceleration)Distance travelledConstant speed
Conversion graphThe conversion rateNothing usefulNot applicable

The last column causes many lost marks. A flat section on a speed–time graph does not mean the object has stopped; it means it is moving at a steady speed.

Worked example 1: a distance–time journey (Core and Extended)

A cyclist leaves home and rides 12 km in 40 minutes. She rests for 20 minutes, then rides home in 30 minutes. (a) Find her speed on each part in km/h. (b) Find her average speed for the whole journey.

Picture the graph: a line rising from (0, 0) to (40, 12), a flat section from 40 to 60 minutes, then a line falling to (90, 0).

(a) Convert minutes to hours before dividing.

  • Outward: 40 minutes = 2/3 h, so speed = 12 ÷ 2/3 = 18 km/h.
  • Rest: 0 km/h.
  • Return: 30 minutes = 0.5 h, so speed = 12 ÷ 0.5 = 24 km/h.

The return line is steeper, which matches the higher speed.

(b) Average speed = total distance ÷ total time = 24 km ÷ 1.5 h = 16 km/h.

The rest counts in the total time. Averaging the three speeds gives the wrong answer, a mistake examiners plan for.

Worked example 2: acceleration and area (Extended)

A car starts from rest and accelerates uniformly to 15 m/s in 6 seconds. It travels at 15 m/s for 20 seconds, then decelerates uniformly to rest in 4 seconds. (a) Find the acceleration and the deceleration. (b) Find the total distance travelled. (c) Find the average speed.

The speed–time graph is a trapezium: up from (0, 0) to (6, 15), flat to (26, 15), down to (30, 0).

(a) Acceleration = gradient = 15 ÷ 6 = 2.5 m/s². Deceleration = 15 ÷ 4 = 3.75 m/s².

(b) Distance = area under the graph. Split it into shapes:

  • Triangle: ½ × 6 × 15 = 45 m
  • Rectangle: 20 × 15 = 300 m
  • Triangle: ½ × 4 × 15 = 30 m

Total: 375 m. You can also use the trapezium formula: ½ × (20 + 30) × 15 = 375 m.

(c) Average speed = 375 ÷ 30 = 12.5 m/s.

Worked example 3: finding an unknown speed (Extended)

A train passes a signal at 4 m/s and accelerates uniformly for 10 seconds to a speed of V m/s. It then travels at V m/s for 30 seconds. The total distance in these 40 seconds is 1070 m. Find V and the acceleration.

Set up the area as an equation. The first 10 seconds form a trapezium with parallel sides 4 and V:

  • First part: ½ × (4 + V) × 10 = 20 + 5V
  • Second part: 30V

Total: 20 + 5V + 30V = 1070, so 35V = 1050 and V = 30 m/s.

Acceleration = (30 − 4) ÷ 10 = 2.6 m/s².

This is a typical Paper 4 structure: the graph gives you shapes, the shapes give you an equation and the equation gives the unknown. If forming the equation is the hard part, our guide to solving linear equations can help.

Worked example 4: a tangent to a curve (Extended)

A distance–time graph for a ball rolling down a slope is a curve. A tangent is drawn at t = 3 seconds. It passes through the points (1.5, 0) and (5, 21), where distance is in metres. Estimate the speed of the ball at t = 3 s.

The speed at an instant is the gradient of the tangent at that point:

Gradient = (21 − 0) ÷ (5 − 1.5) = 21 ÷ 3.5 = 6 m/s.

In the exam you draw the tangent yourself, so the answer is an estimate and mark schemes accept a range. To get within it:

  • Use a sharp pencil and a ruler, touching the curve at exactly one point near t = 3.
  • Choose two points on the tangent that are far apart, which reduces the effect of reading errors.
  • Read their coordinates carefully from the scale.

A tangent drawn through the origin and the point on the curve gives the average speed over the first 3 seconds, not the speed at 3 seconds. That confusion is common.

Conversion graphs

A conversion graph is a straight line through the origin. If 20 units of currency A convert to 36 units of currency B, the line passes through (20, 36) and its gradient, 1.8, is the conversion rate. To convert a large amount that is off the graph, read a convenient value and scale it: 200 units of A is 10 × 20, so it converts to 10 × 36 = 360 units of B. Core questions often ask exactly this.

Non-calculator and calculator handling

Graph reading is set on both papers. On Paper 1 or 2, numbers are chosen to make gradients and areas simple, and you may be asked to draw the graph from a description. On Paper 3 or 4, units need converting (km/h to m/s, minutes to hours) and answers go to 3 significant figures. Our rates, speed and density guide covers the unit conversions in detail.

Mistakes our tutors see

  1. Treating a flat speed–time section as stopped.
  2. Mixing minutes and hours when calculating speed in km/h.
  3. Averaging speeds instead of dividing total distance by total time.
  4. Forgetting the ½ in triangle areas.
  5. Misreading scales, especially when one small square is not 1 unit.
  6. Drawing a chord instead of a tangent for the speed at an instant.

When to get help

  • You can calculate from a graph but struggle to sketch one from a description.
  • Questions with an unknown speed or time leave you unsure how to start.
  • Tangent estimates are always outside the accepted range.
  • Unit conversions in kinematics go wrong more often than the graph work itself.

Self-check

  1. A distance–time graph goes from (10 min, 2 km) to (25 min, 8 km). Find the speed in km/h.
  2. A speed–time graph rises from 0 to 12 m/s in 8 s. Find the acceleration.
  3. Find the distance travelled in question 2.
  4. What does a horizontal line on a speed–time graph show?
  5. A bus decelerates uniformly from 18 m/s to rest in 12 s. Find the deceleration and the distance travelled.

Answers.

  1. 6 km in 15 minutes = 0.25 h: 24 km/h
  2. 12 ÷ 8 = 1.5 m/s²
  3. ½ × 8 × 12 = 48 m
  4. Constant speed, not stopped
  5. 1.5 m/s² and ½ × 12 × 18 = 108 m

Where this leads

Practical graphs lead into plotting curves from equations, covered in our guide to graphs of functions and graphical solutions, and the tangent idea becomes differentiation later in the strand, as our 0580 algebra and graphs topic map shows. Proportional rates link back to proportion relationships in algebra. In Additional Mathematics 0606, kinematics uses calculus to move between displacement, velocity and acceleration; see our 0606 kinematics guide.

How Maths Bodhi helps

In a free demo, the tutor describes a journey in words and asks the student to sketch both graphs, then checks the reading of gradient and area. Practice uses original exam-style graph questions, with progress tracked through written method. For lessons on a shared whiteboard from anywhere, see our online tutoring for IGCSE maths.

Home tuition is available in Gurgaon (Gurugram). Students elsewhere in India and abroad learn with us online. You can book a free demo class.

Written and checked by the Maths Bodhi team. Facts checked against official Cambridge International and Pearson sources, November 2026.

Frequently asked questions

Are speed–time graphs in IGCSE Core?
No. In the 0580 2025 to 2027 syllabus, Core covers travel and conversion graphs. Speed–time graphs, acceleration and the area under the graph are Extended.
What does the area under a speed–time graph represent?
The distance travelled. Split the area into triangles, rectangles and trapeziums, find each area and add them. 0580 uses straight-line sections only.
How do you find acceleration from a speed–time graph?
Acceleration is the gradient: change in speed divided by time taken. A negative gradient is a deceleration.
How do you find speed from a curved distance–time graph?
Draw a tangent to the curve at the time you want, then work out the gradient of the tangent using two points on it that are far apart.
How do you calculate average speed for a journey?
Divide the total distance by the total time, including any time spent stopped. Do not take the mean of the separate speeds.
IGCSE speed time graphsdistance time graphsacceleration and area under a graph0580 E2.9IGCSE maths tutor

Related guides

Keep exploring this maths topic

IGCSE Maths18 Nov 2026

IGCSE Maths 0580 Algebra and Graphs: Every Topic from E2.1 to E2.13

The complete map of Cambridge IGCSE 0580 Algebra and graphs: all 13 sub-topics with their syllabus references, what Core covers and what Extended adds, how algebra is tested on the non-calculator and calculator papers, and a study order.

IGCSE algebra topics0580 algebra and graphsIGCSE Extended algebraIGCSE maths syllabus

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Additional Maths Kinematics (0606): Displacement, Velocity and Acceleration with Calculus

Straight-line motion in Cambridge 0606: differentiate displacement to get velocity and acceleration, integrate back with a starting condition, find when a particle is at rest, tell distance from displacement, and sketch the five motion graphs. Four worked examples with polynomial, exponential and trigonometric motion.

0606 kinematicsdisplacement velocity accelerationparticle at restmotion graphs calculus

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Speed, Density and Pressure: Rates Questions Explained (0580 E1.12)

Average speed, unit conversions such as km/h to m/s, density, pressure, flow rates, fuel consumption and population density for Cambridge IGCSE 0580, including which formulas you must know and which are given, with four worked examples.

IGCSE speed density pressureaverage speed IGCSEdensity questions 0580IGCSE rates

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Extended Calculator Practice: Paper 4 Style Set 2

Ten more original Paper 4 style questions for Cambridge IGCSE 0580 Extended: growth and decay, bounds, similar solids, histograms, bearings, 3D angles and trig equations, with full worked answers.

IGCSE calculator practice0580 Paper 4 set 2IGCSE Extended questionsIGCSE exam practice

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Maths A* Questions: A 10-Problem Challenge Set With Solutions

Ten original A*-level problems for Cambridge IGCSE 0580 Extended that test proof, exact values and precise reasoning, with full solutions and the one idea each problem turns on.

IGCSE maths A* questions0580 challenge problemsIGCSE Extended proofIGCSE A* practice

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Maths Word Problems: How to Turn Words into Working

How to solve IGCSE maths word problems: a table translating common exam phrases into maths, four fully worked problems on ratio, speed, inequalities and time, traps to avoid and a checklist.

IGCSE maths word problemsIGCSE worded questionsIGCSE exam technique0580 revision

By Maths Bodhi Team

Read guide