WhatsApp us
IGCSE Maths18 Nov 2026

IGCSE Speed, Density and Pressure: Rates Questions Explained (0580 E1.12)

Average speed, unit conversions such as km/h to m/s, density, pressure, flow rates, fuel consumption and population density for Cambridge IGCSE 0580, including which formulas you must know and which are given, with four worked examples.

IGCSE Speed, Density and Pressure: Rates Questions Explained (0580 E1.12)

For IGCSE rates questions you must know speed = distance ÷ time by heart. Formulas for other rates, such as density = mass ÷ volume and pressure = force ÷ area, are given in the question when Cambridge needs you to use them. After that, the marks depend on two things: converting time and units correctly, and using total distance and total time for an average speed.

This is E1.12 Rates in Cambridge 0580, the same at Core and Extended. The syllabus groups rates into common ones (hourly pay, exchange rates, flow rates, fuel consumption) and other ones (pressure, density, population density), plus average speed. Exchange rates and money get their own guide in this series. If units are the stumbling block, a one-to-one Cambridge IGCSE tutor can build the conversions step by step.

The formulas: which you must know

RateFormulaTypical unitsGiven in the question?
Speeddistance ÷ timekm/h, m/sNo, must be known
Densitymass ÷ volumeg/cm³, kg/m³Yes, when required
Pressureforce ÷ areaN/m²Yes, when required
Population densitypopulation ÷ areapeople per km²Yes, when required
Flow ratevolume ÷ timelitres per minuteUsually clear from the units
Fuel consumptiondistance per litre, or litres per 100 kmkm/l, l/100 kmRead the units given

The syllabus says the speed, distance and time formula must be known, and that other required formulas will be given in the question. Units are written as m/s or g/cm³. Every formula above can be rearranged with the same triangle idea: distance = speed × time, mass = density × volume, force = pressure × area.

This topic is one of 18 in the strand; see where rates fit among the 18 Number topics.

Converting rates: km/h and m/s

Most unit slips happen here, so learn one reliable method:

  • 1 km = 1000 m and 1 hour = 3600 seconds.
  • To change km/h to m/s, multiply by 1000 and divide by 3600. For example, 54 km/h = 54 000 m ÷ 3600 s = 15 m/s.
  • To change m/s to km/h, multiply by 3600 and divide by 1000, which is the same as multiplying by 3.6. For example, 1.2 m/s × 3.6 = 4.32 km/h.

Time in hours and minutes must be turned into a decimal of an hour before you divide: 1 hour 12 minutes = 1.2 hours, because 12 ÷ 60 = 0.2.

Worked example 1: average speed and conversion

A runner covers 13.2 km in 1 hour 12 minutes. Find the average speed in (a) km/h, (b) m/s, to 3 significant figures.

(a) Time = 1 + 12/60 = 1.2 hours. Speed = 13.2 ÷ 1.2 = 11 km/h.

(b) 11 km/h = 11 000 m ÷ 3600 s = 3.0555… = 3.06 m/s (3 s.f.).

Writing 1 hour 12 minutes as 1.12 hours is the classic error. It would give 11.8 km/h, which is wrong.

Worked example 2: average speed over two stages

A car travels 90 km at 60 km/h, then 50 km at 100 km/h. Find its average speed for the whole journey.

The average speed is total distance ÷ total time, not the average of the two speeds.

  • Time for stage 1: 90 ÷ 60 = 1.5 hours.
  • Time for stage 2: 50 ÷ 100 = 0.5 hours.
  • Total distance: 140 km. Total time: 2 hours.

Average speed = 140 ÷ 2 = 70 km/h.

The average of 60 and 100 is 80, which would only be right if the car spent equal time at each speed. Here it spent three times as long at the slower speed, so the true average is lower.

Worked example 3: density

A metal block measures 4 cm by 5 cm by 2.5 cm and has a mass of 395 g. Density = mass ÷ volume. (a) Find the density of the metal. (b) Find the mass of 120 cm³ of the same metal.

(a) Volume = 4 × 5 × 2.5 = 50 cm³. Density = 395 ÷ 50 = 7.9 g/cm³.

(b) Rearrange: mass = density × volume = 7.9 × 120 = 948 g.

Units guide you. Density in g/cm³ means grams divided by cubic centimetres, so mass in grams and volume in cm³ keep everything consistent.

Worked example 4: pressure, and which face gives the most

A box measuring 0.5 m by 0.4 m by 0.3 m exerts a force of 600 N on the floor. Pressure = force ÷ area. (a) Find the pressure when it rests on its 0.5 m by 0.4 m face. (b) Find the greatest pressure it can exert.

(a) Area = 0.5 × 0.4 = 0.2 m². Pressure = 600 ÷ 0.2 = 3000 N/m².

(b) The force stays 600 N, so the greatest pressure comes from the smallest face. The faces are 0.2 m², 0.5 × 0.3 = 0.15 m² and 0.4 × 0.3 = 0.12 m². Greatest pressure = 600 ÷ 0.12 = 5000 N/m².

Reasoning before calculating saves time: a smaller area means a larger pressure for the same force.

Other rates in one line each

  • Hourly pay: 7.5 hours at $18.50 per hour earns 7.5 × 18.50 = $138.75.
  • Flow rate: a 240-litre tank filled at 12 litres per minute takes 240 ÷ 12 = 20 minutes.
  • Population density: 2.4 million people in 1500 km² is 2 400 000 ÷ 1500 = 1600 people per km².
  • Fuel consumption: check whether the question gives kilometres per litre or litres per 100 km; they work in opposite directions.

On each paper

On Papers 1 and 2, rates questions use friendly numbers, as in examples 2 and 4. You need confident division by decimals, such as 600 ÷ 0.12, which is 60 000 ÷ 12. On Papers 3 and 4, expect awkward times and values, conversions such as km/h to m/s, and answers to 3 significant figures. Rates also appear inside longer questions on graphs and mensuration, so the speed formula should be automatic.

When to get help

Look for these signs that rates need focused work:

  • The student averages speeds instead of using total distance and total time.
  • Times like 2 hours 45 minutes are entered as 2.45.
  • Units are dropped or mixed, so densities come out as 0.0079 or 7900 when 7.9 was expected.
  • The student cannot rearrange a given formula, such as finding volume from density and mass.
  • Speed–time graph questions in algebra feel unrelated to this topic.

These are often the first signs of a wider units problem, which affects mensuration too, so it is worth fixing early.

Mistakes our tutors see

  1. Decimal time errors: 1 hour 12 minutes written as 1.12 hours.
  2. Averaging speeds across stages of unequal time.
  3. Converting the wrong way, for example dividing by 3.6 to get km/h.
  4. Mixing cm and m in pressure or density calculations.
  5. Forgetting units in the final answer, or giving N instead of N/m².
  6. Using the given formula upside down, such as volume ÷ mass for density.

Self-check

  1. Change 54 km/h to m/s.
  2. A train travels 36 km in 45 minutes. Find its average speed in km/h.
  3. A metal has density 2.7 g/cm³. Find the mass of 350 cm³ of it.
  4. A force of 500 N acts on an area of 250 cm². Pressure = force ÷ area. Find the pressure in N/m².
  5. A car uses 7.6 litres of fuel per 100 km. How far can it travel on 95 litres?

Answers.

  1. 54 000 ÷ 3600 = 15 m/s.
  2. 45 minutes = 0.75 hours, so 36 ÷ 0.75 = 48 km/h.
  3. 2.7 × 350 = 945 g.
  4. 250 cm² = 0.025 m², so 500 ÷ 0.025 = 20 000 N/m².
  5. 95 ÷ 7.6 = 12.5 lots of 100 km, so 1250 km.

Where it leads

Speed links directly to distance–time and speed–time graphs, where gradient is a rate. Pressure and density need confident area and volume units, covered in converting area and volume units. Rates are ratios of two quantities, so sharing and scaling with ratios is the natural companion topic. Measured values bring in bounds of a speed or density, and growth "per year" rates lead into percentage change and compound interest. Rates of change become derivatives in Additional Mathematics, IB and A level calculus.

How Maths Bodhi helps

In the free demo, the tutor gives one speed question with awkward time, one two-stage average speed question and one density question with a given formula. The working shows quickly whether the issue is time conversion, units or rearranging. Younger students can start with our IGCSE maths support for Grade 9 students, where rates are taught alongside the units they rely on.

Home tuition is available in Gurgaon (Gurugram). Students elsewhere in India and abroad learn with us online. You can book a free demo class.

Written and checked by the Maths Bodhi team. Facts checked against official Cambridge International and Pearson sources, November 2026.

Frequently asked questions

Do I need to memorise the density and pressure formulas for IGCSE maths?
For 0580, the syllabus says required formulas for rates such as density and pressure will be given in the question. You must know the speed, distance and time formula.
How do you find average speed for a journey with two parts?
Divide the total distance by the total time. Do not average the two speeds unless the time spent at each speed is the same.
How do I convert km/h to m/s?
Multiply by 1000 to change kilometres to metres and divide by 3600 to change hours to seconds. This is the same as dividing by 3.6.
How do I write minutes as a decimal of an hour?
Divide the minutes by 60. For example, 12 minutes is 0.2 hours and 45 minutes is 0.75 hours, so 1 hour 12 minutes is 1.2 hours.
Are rates the same for IGCSE Core and Extended?
Yes. E1.12 Rates has the same content at both tiers in the 0580 syllabus, including average speed, density, pressure and other rates.
What units are used for density in IGCSE?
Units are written with a slash, such as g/cm³ for grams per cubic centimetre or kg/m³ for kilograms per cubic metre.
IGCSE speed density pressureaverage speed IGCSEdensity questions 0580IGCSE ratesIGCSE maths tutor

Related guides

Keep exploring this maths topic

IGCSE Maths18 Nov 2026

IGCSE Number Questions for the Calculator Paper: 12 Paper 4-Style Questions with Answers

Twelve original calculator number questions for Cambridge IGCSE 0580 Paper 4: compound interest, depreciation, reverse percentages, rates, currency, time zones and growth, each with full working and accuracy notes.

IGCSE calculator questions0580 Paper 4 numberIGCSE compound interest practiceIGCSE rates and percentages

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Unit Conversions for Area and Volume: cm² to m², cm³ to Litres and More (0580 E5.1)

Why 1 m² is 10 000 cm² and 1 m³ is a million cm³, how capacity links to volume, and how to convert units inside density, flow and rainfall problems for Cambridge IGCSE 0580 sub-topic 5.1. A full conversion table, four original worked examples and a self-check.

IGCSE unit conversionscm2 to m2cm3 to litresunits of measure 0580

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Maths Word Problems: How to Turn Words into Working

How to solve IGCSE maths word problems: a table translating common exam phrases into maths, four fully worked problems on ratio, speed, inequalities and time, traps to avoid and a checklist.

IGCSE maths word problemsIGCSE worded questionsIGCSE exam technique0580 revision

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Speed–Time and Distance–Time Graphs: Gradient, Area and Acceleration (0580 E2.9)

Graphs in practical situations for Cambridge IGCSE 0580: travel and conversion graphs at Core, then speed–time graphs, acceleration, distance as area and tangents to curves at Extended, with four original worked examples and a self-check.

IGCSE speed time graphsdistance time graphsacceleration and area under a graph0580 E2.9

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

Edexcel IGCSE Maths Problem Solving: What 4MA1 Tests, and Why AO3 Is Not What You Think

In 4MA1, AO3 means handling data, not problem solving. Problem solving is a separate 25% of Foundation and 30% of Higher marks. What Pearson means by it, a five-step method and four original worked problems.

Edexcel IGCSE problem solving4MA1 assessment objectivesAO3 handling datamathematical reasoning IGCSE

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Direct and Inverse Proportion: Squares, Cubes and Roots with the Constant k (0580 E2.8)

Direct and inverse proportion in algebraic form for Cambridge IGCSE 0580 Extended: the ∝ symbol, finding k, square, cube, square root and cube root proportion, percentage change questions, worked examples and a self-check.

IGCSE direct and inverse proportionvariationconstant of proportionality0580 Extended

By Maths Bodhi Team

Read guide