To convert an area, square the length conversion factor; to convert a volume, cube it. Since 1 m = 100 cm, 1 m² = 100² = 10 000 cm² and 1 m³ = 100³ = 1 000 000 cm³. For capacity, 1 litre = 1000 cm³ and 1 m³ = 1000 litres. Those few facts cover Cambridge IGCSE 0580 sub-topic 5.1, which is the same for Core and Extended.
It sounds like a small topic, but unit slips cost marks all over the paper, in volume, density, rate and map questions. If your child keeps writing 1 m² = 100 cm², it is worth fixing now. Our tutors for Cambridge IGCSE maths treat it as a foundation skill.
What the syllabus lists
Sub-topic 5.1 asks students to use metric units of mass, length, area, volume and capacity in practical situations, and to convert into larger or smaller units. The units named are:
| Quantity | Units in the syllabus |
|---|---|
| Length | mm, cm, m, km |
| Area | mm², cm², m², km² |
| Volume | mm³, cm³, m³ |
| Capacity | ml, l |
| Mass | g, kg |
Conversions specifically include area units (such as cm² to m²) and volume to capacity (such as m³ to litres). Core and Extended content is identical here. For the rest of the strand, see our 0580 mensuration overview.
Why the factors square and cube
Picture a square that is 1 m by 1 m. Each side is 100 cm, so the square is 100 cm by 100 cm, and its area is 100 × 100 = 10 000 cm². The area did not change; only the unit did. A cube 1 m on each side is 100 × 100 × 100 = 1 000 000 cm³.
That one picture prevents the most common mistake in the topic. If you are ever unsure, draw the square or the cube and label it in both units.
The full conversion table
| Length | Area | Volume |
|---|---|---|
| 1 cm = 10 mm | 1 cm² = 100 mm² | 1 cm³ = 1000 mm³ |
| 1 m = 100 cm | 1 m² = 10 000 cm² | 1 m³ = 1 000 000 cm³ |
| 1 km = 1000 m | 1 km² = 1 000 000 m² | – |
Capacity and mass:
- 1 litre = 1000 ml = 1000 cm³, so 1 ml = 1 cm³.
- 1 m³ = 1000 litres.
- 1 kg = 1000 g.
To go to a smaller unit, multiply; to go to a larger unit, divide. A sense check: there should be more of a smaller unit.
Worked example 1: area conversions
(a) Convert 3.5 m² to cm². Multiply by 10 000: 3.5 × 10 000 = 35 000 cm².
(b) Convert 2.4 km² to m². Multiply by 1 000 000: 2 400 000 m², or 2.4 × 10⁶ m² in standard form.
(c) Convert 750 mm² to cm². Divide by 100: 7.5 cm².
Large conversions often end up in standard form, so it helps to be fluent with powers of ten; our standard form guide covers it.
Worked example 2: a tank in mixed units
A tank is a cuboid measuring 1.2 m by 80 cm by 50 cm. How many litres does it hold?
Put everything in centimetres first: 120 cm × 80 cm × 50 cm.
Volume = 120 × 80 × 50 = 480 000 cm³.
Since 1 litre = 1000 cm³, capacity = 480 000 ÷ 1000 = 480 litres.
Check in metres: 1.2 × 0.8 × 0.5 = 0.48 m³, and 0.48 × 1000 = 480 litres. ✓
The trap is multiplying 1.2 × 80 × 50 with mixed units, which gives 4800 and no sensible unit at all. Convert before you multiply.
Worked example 3: density with unit changes (calculator)
Steel has a density of 7.8 g/cm³. (a) Write this in kg/m³. (b) Find the mass in kg of a steel bar of volume 0.0035 m³.
(a) 1 m³ = 1 000 000 cm³, so 1 m³ of steel has mass 7.8 × 1 000 000 = 7 800 000 g = 7800 kg. Density = 7800 kg/m³.
(b) Convert the volume: 0.0035 m³ = 0.0035 × 1 000 000 = 3500 cm³.
Mass = density × volume = 7.8 × 3500 = 27 300 g = 27.3 kg.
Or use part (a): 7800 × 0.0035 = 27.3 kg. ✓
Density, speed and pressure all depend on matching units. Our guide to rates including speed, density and pressure has more.
Worked example 4: rainfall and filling time
(a) 12 mm of rain falls on a flat roof measuring 15 m by 8 m. How many litres of water is that?
Convert the depth: 12 mm = 0.012 m.
Volume = 15 × 8 × 0.012 = 1.44 m³ = 1.44 × 1000 = 1440 litres.
(b) A pool measures 25 m by 10 m and is filled to a depth of 1.6 m. A pump delivers 250 litres per minute. How long does it take to fill, in hours and minutes?
Volume = 25 × 10 × 1.6 = 400 m³ = 400 000 litres.
Time = 400 000 ÷ 250 = 1600 minutes = 26 hours 40 minutes.
These questions test three things at once: volume, unit conversion and time. A single slip, such as using 12 m for 12 mm, ruins the answer, so state the units at every line.
Non-calculator and calculator handling
Papers 1 and 2. Expect direct conversions (m² to cm², cm³ to litres) and small practical problems with friendly numbers. Moving the decimal point correctly is the whole skill, so practise with powers of ten until it is automatic.
Papers 3 and 4. Conversions appear as steps inside longer questions: a volume in cm³ converted to litres at the end, a density given in g/cm³ used with lengths in metres, or a map area converted to km². Give non-exact answers to 3 significant figures unless told otherwise.
Mistakes our tutors see
- Using 100 for cm² to m² instead of 10 000.
- Mixing units inside one calculation, such as metres and centimetres in a volume.
- Multiplying when you should divide, so the answer gets bigger when the unit gets bigger.
- Forgetting that 1 ml = 1 cm³, and converting litres to cm³ by 100.
- mm to m slips: 12 mm is 0.012 m, not 0.12 m.
- Minutes written as a decimal of an hour: 1600 minutes is 26 h 40 min, not 26.67 h, unless the question asks for decimals.
When to get help
Signs that this topic needs attention:
- Answers are the right digits but off by a factor of 10, 100 or 1000.
- The student converts lengths confidently but freezes on area and volume units.
- Density and rate questions are skipped because of the units, not the formula.
- Standard form answers appear without the student being sure what they mean.
Self-check
- Convert 6 m² to cm².
- Convert 450 000 cm³ to m³.
- How many cm³ are in 2.5 litres?
- Convert 75 mm² to cm².
- Convert 3.2 km² to m².
Answers. 1: 60 000 cm². 2: 0.45 m³. 3: 2500 cm³. 4: 0.75 cm². 5: 3 200 000 m².
Where it leads
The squaring and cubing idea returns in similar shapes, where area scales by k² and volume by k³; see our guide to area and volume of similar shapes. Volume units feed straight into our guide to volume and surface area of solids, and circle units into arcs and sectors. In sciences and at A level, the same habits are needed for SI units and dimensional checks.
How Maths Bodhi helps
Our tutors check unit fluency early, because it affects so many other topics. In the free demo, the student converts one area, one volume and one capacity, and explains each factor. If the explanation is "I remember it", we teach the square-and-cube picture until it becomes "I can see it". Families in the exam year often use our Class 10 IGCSE maths sessions for this kind of targeted repair.
Home tuition is available in Gurgaon (Gurugram). Students elsewhere in India and abroad learn with us online. You can book a free demo class.
Written and checked by the Maths Bodhi team. Facts checked against official Cambridge International and Pearson sources, November 2026.
Frequently asked questions
- How many cm² are in 1 m²?
- 10 000. A square of side 1 m is 100 cm by 100 cm, so its area is 100 × 100 = 10 000 cm².
- How many cm³ are in 1 m³?
- 1 000 000. A cube of side 1 m is 100 cm on each edge, so its volume is 100 × 100 × 100 cm³.
- How many litres are in 1 m³?
- 1000 litres, because 1 litre is 1000 cm³ and 1 m³ is 1 000 000 cm³.
- Is 1 ml the same as 1 cm³?
- Yes. One millilitre has a volume of exactly one cubic centimetre, so 250 ml is 250 cm³.
- Are unit conversions in IGCSE Core and Extended?
- Yes. Units of measure (5.1) is the same at both tiers in the 0580 2025–2027 syllabus, including area units and volume-to-capacity conversions.
- How do I convert cm² to m²?
- Divide by 10 000. For example, 25 000 cm² = 2.5 m².
