WhatsApp us
IGCSE Maths18 Nov 2026

IGCSE Maths Mensuration Topics (0580 E5): Units, Area, Circles, Surface Area, Volume and Compound Shapes

The five Cambridge IGCSE 0580 mensuration sub-topics, E5.1 to E5.5, with Core and Extended differences, which formulas are printed on the paper and which you must remember, how answers in terms of π and to 3 significant figures are handled, and a study order.

IGCSE Maths Mensuration Topics (0580 E5): Units, Area, Circles, Surface Area, Volume and Compound Shapes

Mensuration is topic area 5 of Cambridge IGCSE Mathematics 0580. It covers measuring and calculating with shapes, in five sub-topics: units of measure (5.1), area and perimeter (5.2), circles, arcs and sectors (5.3), surface area and volume (5.4), and compound shapes and parts of shapes (5.5). Unlike most strands, Core and Extended share nearly all of it; the main difference is in arcs and sectors, and in how hard the compound solids get.

The other thing that sets mensuration apart is the List of formulas printed on page 2 of every paper. Many volume and surface area formulas are given, but several everyday ones are not. Knowing which is which saves time and panic. If your child wants focused help on this strand, our Cambridge IGCSE maths tutoring covers it against the 0580 numbering.

The five sub-topics at a glance

Based on the 2025–2027 syllabus, used for exams in 2025, 2026 and 2027.

RefSub-topicCoreExtended
5.1Units of measureMetric units of mass, length, area, volume and capacity; converting between them, including cm² to m² and m³ to litresSame
5.2Area and perimeterRectangle, triangle, parallelogram, trapeziumSame
5.3Circles, arcs and sectorsCircumference and area; arc length and sector area where the sector angle is a factor of 360°Any sector angle, including minor and major sectors
5.4Surface area and volumeCuboid, prism, cylinder, sphere, pyramid, coneSame list
5.5Compound shapes and parts of shapesCompound shapes and solids, and parts of them, e.g. half a sphereSame headings; the syllabus example is a frustum

The vocabulary in geometry sub-topic 4.1 matters here too. Core uses "sphere" but the term "hemisphere" is not required, while Extended students should know both hemisphere and frustum.

Formulas: printed or remembered?

Printed on page 2 (Core and Extended)Not printed: learn these
Area of a triangle, ½bhArea of a rectangle, parallelogram and trapezium
Area of a circle, πr²; circumference, 2πrArc length and sector area as fractions of the circle
Curved surface area of a cylinder, 2πrhTotal surface area of a cylinder (add the two circles)
Curved surface area of a cone, πrlSlant height of a cone from Pythagoras
Surface area of a sphere, 4πr²Surface area and volume of a cuboid
Volume of a prism, Al; pyramid, ⅓AhVolume of a frustum (as a difference of two cones)
Volume of a cylinder, πr²h; cone, ⅓πr²h; sphere, ⁴⁄₃πr³Unit conversion factors

The Extended list also includes the quadratic formula, the sine and cosine rules and ½ab sin C, which you will need for segment areas. Our IGCSE list of formulas explained goes through every line.

What each sub-topic asks

5.1 Units of measure

Converting units of area and volume is where many students drop marks, because 1 m = 100 cm but 1 m² = 10 000 cm² and 1 m³ = 1 000 000 cm³. Capacity links in: 1 litre = 1000 cm³, and 1 m³ = 1000 litres. Our guide to area and volume unit conversions has a full conversion table and worked examples.

5.2 Area and perimeter

The four shapes are rectangle, triangle, parallelogram and trapezium. Only the triangle formula is given. A quick example in our own numbers:

A trapezium has parallel sides 7 cm and 13 cm, 6 cm apart. Find its area. Area = ½(7 + 13) × 6 = 60 cm².

A parallelogram has base 9 cm and perpendicular height 4 cm. Area = 9 × 4 = 36 cm². Use the perpendicular height, never the sloping side.

There is no separate guide for 5.2, because these skills mostly appear inside compound shapes; see 5.5.

5.3 Circles, arcs and sectors

An arc is a fraction of the circumference and a sector is the same fraction of the area, with the fraction being θ/360. Core questions keep the angle to a factor of 360°, such as 90°, 120° or 45°. Extended questions can use any angle and ask for major sectors. Our arc length and sector area guide includes the reverse questions and segment areas.

5.4 Surface area and volume

Six solids, with most formulas given. The skill is choosing the right one, finding a missing slant height or radius, and working backwards from a volume. See our guide to volumes and surface areas of the six 0580 solids. The syllabus notes that "prism" means any solid with a uniform cross-section, including a cylindrical sector.

5.5 Compound shapes and parts of shapes

Shapes made of simpler pieces, and pieces cut from simpler shapes: a rectangle with a semicircle, a hemisphere on a cylinder, a cone with its top cut off. Our compound shapes and frustums guide works through the frustum both ways.

Answers in terms of π, or to 3 significant figures?

The syllabus says answers in 5.3, 5.4 and 5.5 may be asked for in terms of π. That instruction changes what you write:

  • "In terms of π": leave π as a symbol. A sphere of radius 3 has volume 36π cm³. Do not write 113.
  • "Exact": the same idea; π stays, and so do surds.
  • Otherwise, on a calculator paper: give non-exact answers to 3 significant figures, using the calculator's π or 3.142.
  • On a non-calculator paper: expect "in terms of π" or numbers that cancel neatly.

Keep full values in the calculator between steps. Rounding a radius to 3 significant figures and then cubing it can change the final answer. Our guide to 3 significant figures and accuracy rules has more on this.

How mensuration is examined

From 2025, Core takes Paper 1 (non-calculator) and Paper 3 (calculator), each 1 hour 30 minutes and 80 marks. Extended takes Paper 2 (non-calculator) and Paper 4 (calculator), each 2 hours and 100 marks.

Non-calculator. Expect area of trapeziums and compound shapes with whole numbers, sector and arc questions with friendly angles, volumes in terms of π, and unit conversions.

Calculator. This is where mensuration is heaviest: cones with slant heights to find, frustums, hemispheres, melting-and-recasting questions where volume is conserved, and sectors with awkward angles. Our Paper 4 calculator guide covers how these sit in the longer structured questions.

Mensuration also combines with similarity (volumes of similar solids), with trigonometry (the height of a triangle or the area of a segment) and with rates (how long a tank takes to fill).

A study order that works

This is our advice, based on how the skills build.

  1. Units and conversions (5.1), including area and volume units.
  2. Area and perimeter of the four shapes (5.2), learning the three unprinted formulas.
  3. Circles (5.3): circumference and area, in terms of π and as decimals.
  4. Arcs and sectors (5.3): Core angles first, then any angle and major sectors.
  5. Prisms and cylinders (5.4), with cross-section × length as the core idea.
  6. Pyramids, cones and spheres (5.4), including slant height from Pythagoras.
  7. Compound shapes and solids (5.5): add or subtract pieces.
  8. Parts of solids and frustums (5.5), using similar shapes for the missing cone.
  9. Mixed questions, such as our IGCSE mensuration practice set.

Before step 8, it helps to have covered similar shapes and the k³ rule.

Common traps across the strand

  • Linear conversion factors for areas or volumes: writing 1 m² = 100 cm².
  • Slant height and vertical height mixed up in cones and pyramids.
  • Curved surface area used when total surface area was asked for, or the reverse.
  • Diameter used as radius.
  • Forgetting the flat face of a hemisphere or the circular ends of a cylinder.
  • Rounding mid-question.

How mensuration connects to the rest of 0580

The strand sits right after geometry for a reason: shape vocabulary, nets and similarity all feed into it. Our 0580 geometry topics guide covers those foundations. Trigonometry comes after, and the two meet in segment areas and 3D shapes.

Number skills feed in as well. A volume often becomes a mass through density, or a time through a flow rate: a tank that holds 400 litres and fills at 25 litres per minute takes 16 minutes. Those steps belong to the number strand, and our guide to speed, density and pressure as rates covers them. In practice, the hardest mensuration questions on Paper 4 are often a volume calculation followed by one of these conversions.

How Maths Bodhi helps

In the free demo, our tutor sets one cone question and one area conversion. The cone shows whether the student can find a slant height and choose the right formula; the conversion shows whether unit factors are understood or guessed. Tutors are matched to Core or Extended, and progress is tracked through full written method on exam-style questions. Students outside Gurgaon can take IGCSE maths lessons online from home.

Home tuition is available in Gurgaon (Gurugram). Students elsewhere in India and abroad learn with us online. You can book a free demo class.

Written and checked by the Maths Bodhi team. Facts checked against official Cambridge International and Pearson sources, November 2026.

Frequently asked questions

What topics are in IGCSE maths mensuration?
In 0580 there are five sub-topics: units of measure; area and perimeter; circles, arcs and sectors; surface area and volume; and compound shapes and parts of shapes.
Which mensuration formulas are given in the IGCSE exam?
The List of formulas gives the area of a triangle and circle, circumference, the curved surface areas of a cylinder and cone, the surface area of a sphere, and the volumes of a prism, pyramid, cylinder, cone and sphere.
Is the trapezium area formula given in IGCSE?
No. The 0580 syllabus says that, except for the area of a triangle, the area and perimeter formulas are not given. Learn ½(a + b)h for a trapezium.
What is the difference between Core and Extended mensuration?
Most content is shared. The main written difference is that Core arc and sector questions use angles that are factors of 360°, while Extended uses any angle and includes major sectors.
What does "give your answer in terms of π" mean?
Leave π as a symbol in the final answer, for example 36π cm³, instead of converting it to a decimal.
Is the frustum in IGCSE maths?
Frustum is listed in the Extended vocabulary, and the 0580 syllabus gives finding the surface area and volume of a frustum as an Extended example of compound solids.
IGCSE mensuration0580 area and volumeIGCSE surface area formulasarcs and sectors IGCSEIGCSE maths tutor

Related guides

Keep exploring this maths topic

IGCSE Maths18 Nov 2026

IGCSE Volume and Surface Area: Cones, Spheres, Pyramids, Cylinders and Prisms (0580 E5.4)

Volume and surface area of the six solids in Cambridge IGCSE 0580 sub-topic 5.4, which formulas are on the List of formulas, how to find a slant height, why curved and total surface area differ, and how to work backwards from a volume. Four original worked examples and a self-check.

IGCSE volume and surface areavolume of a conesurface area of a spherepyramid volume IGCSE

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Mensuration Questions: 11 Practice Questions on Area, Sectors, Surface Area and Volume

Eleven original IGCSE 0580 mensuration questions in three levels, from unit conversions and trapezia to sectors, cones, spheres, frustums and segments, with full working, answers in terms of π where asked, and marking notes.

IGCSE mensuration practiceIGCSE surface area and volume questionsIGCSE arc and sector questions0580 mensuration

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Frustum Volume and Compound Shapes: Parts of Solids, Composite Areas and Cut Cones (0580 E5.5)

How to find the volume and surface area of a frustum for Cambridge IGCSE 0580, including when the full cone's height is missing, plus compound 2D shapes, compound solids and parts of solids such as a cylindrical wedge. Four original worked examples and a self-check.

IGCSE frustumcompound shapes IGCSEvolume of a frustumparts of solids

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Arc Length and Sector Area: Formulas, Reverse Questions and Segments (0580 E5.3)

How to find arc length, sector area and sector perimeter for Cambridge IGCSE 0580, what Core and Extended each expect, how to work backwards to an angle or a radius, and how Extended students find the area of a segment. Four original worked examples and a self-check.

IGCSE arc lengthsector area IGCSEarea of a segmentcircles 0580

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Unit Conversions for Area and Volume: cm² to m², cm³ to Litres and More (0580 E5.1)

Why 1 m² is 10 000 cm² and 1 m³ is a million cm³, how capacity links to volume, and how to convert units inside density, flow and rainfall problems for Cambridge IGCSE 0580 sub-topic 5.1. A full conversion table, four original worked examples and a self-check.

IGCSE unit conversionscm2 to m2cm3 to litresunits of measure 0580

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Maths Formulas to Memorise: What the Exam Doesn't Give You

The IGCSE maths formulas you must memorise for Cambridge 0580, topic by topic, set against what the List of formulas on page 2 already gives, with worked examples and a three-week recall plan.

IGCSE maths formulasIGCSE formulas to memorise0580 formula listIGCSE revision

By Maths Bodhi Team

Read guide