WhatsApp us
IGCSE Maths18 Nov 2026

IGCSE Mensuration Questions: 11 Practice Questions on Area, Sectors, Surface Area and Volume

Eleven original IGCSE 0580 mensuration questions in three levels, from unit conversions and trapezia to sectors, cones, spheres, frustums and segments, with full working, answers in terms of π where asked, and marking notes.

IGCSE Mensuration Questions: 11 Practice Questions on Area, Sectors, Surface Area and Volume

Mensuration is the part of IGCSE maths where knowing what is on the formula sheet matters as much as the maths. The eleven original questions below, written in the style of Cambridge 0580, cover every mensuration heading: units, area and perimeter, circles, arcs and sectors, surface area and volume, and compound shapes. Each has full working and a note on how marks are usually given.

The set is split into three levels. Level 1 can be done without a calculator. Levels 2 and 3 are calculator questions, so give non-exact answers to 3 significant figures and use the π key or 3.142. Some parts ask for an answer in terms of π, which you should leave exactly as a multiple of π. To practise the setting-out with someone checking every line, a Cambridge IGCSE mensuration tutor can run Levels 2 and 3 with you as a timed mini-paper.

What the formula list gives you, and what it does not

Every 0580 paper prints a list of formulas on page 2. For mensuration it includes the area of a triangle and a circle, the circumference, the curved surface areas of a cylinder and a cone, the surface area of a sphere, and the volumes of a prism, pyramid, cylinder, cone and sphere. It does not give the area of a trapezium, parallelogram or rectangle, so learn those. Arc length and sector area are worked out as fractions of the circumference and the area of the whole circle.

Our marking notes use M for method, A for an accurate answer that depends on it, and B for an independent mark. They describe common practice in our own words.

Level 1: no calculator

Q1. Convert (a) 3.4 m² to cm², (b) 2.5 litres to cm³, (c) 0.8 m³ to litres. [3]

(a) 1 m² = 100 × 100 = 10 000 cm², so 3.4 m² = 34 000 cm².

(b) 1 litre = 1000 cm³, so 2.5 litres = 2500 cm³.

(c) 1 m³ = 1000 litres, so 0.8 m³ = 800 litres.

Marks: B1 each. The trap in (a) is multiplying by 100 instead of 10 000. Area units square the length conversion and volume units cube it.

Q2. A trapezium has parallel sides 7.5 cm and 12.3 cm, and the perpendicular distance between them is 6.4 cm. Find its area. [2]

Area = ½ × (7.5 + 12.3) × 6.4 = ½ × 19.8 × 6.4 = 9.9 × 6.4 = 63.36 cm².

Marks: M1 for the trapezium formula with the right values; A1.

Q3. A cylinder has radius 4 cm and height 11 cm. Find, in terms of π, (a) its volume, (b) its total surface area. [4]

(a) V = π × 4² × 11 = 176π cm³.

(b) Two circular ends: 2 × π × 4² = 32π. Curved surface: 2π × 4 × 11 = 88π. Total = 120π cm².

Marks: M1 A1 for each part. Students often forget the two ends, giving only 88π.

Q4. A solid cone has base radius 5 cm and vertical height 12 cm. Find (a) the slant height, (b) the total surface area in terms of π, (c) the volume in terms of π. [5]

(a) l = √(5² + 12²) = √169 = 13 cm.

(b) Curved surface = πrl = π × 5 × 13 = 65π. Base = 25π. Total = 90π cm².

(c) V = ⅓ × π × 25 × 12 = 100π cm³.

Marks: B1 for (a); M1 A1 for (b); M1 A1 for (c). The curved surface uses the slant height, the volume uses the vertical height.

Level 2: calculator

Q5. A sector has radius 9 cm and angle 140°. Find (a) the arc length in terms of π, (b) the perimeter to 3 significant figures, (c) the area. [5]

(a) Arc = (140/360) × 2π × 9 = 7π cm.

(b) Perimeter = arc + two radii = 7π + 18 = 39.99… = 40.0 cm.

(c) Area = (140/360) × π × 9² = 31.5π = 98.96… = 99.0 cm².

Marks: M1 A1 for the arc; B1 for adding both radii; M1 A1 for the area. Writing 40.0, not 40, shows 3 significant figures.

Q6. A sector of a circle of radius 8 cm has area 50 cm². Find the angle of the sector. [3]

(θ/360) × π × 64 = 50, so θ = 50 × 360 ÷ (64π) = 89.52… = 89.5°.

Marks: M1 for a correct equation; M1 for rearranging; A1.

Q7. A sphere has volume 900 cm³. Find (a) its radius, (b) its surface area. [4]

(a) (4/3)πr³ = 900, so r³ = 2700/(4π) = 214.86…, and r = 5.989… = 5.99 cm.

(b) Surface area = 4πr² = 450.79… = 451 cm² (using the unrounded radius).

Marks: M1 for the rearrangement; A1; M1 A1 for (b). Using r = 5.99 gives 450.9, which still rounds to 451, but carry full accuracy as a habit.

Level 3: compound shapes and parts of shapes

Q8. A solid is made from a cylinder of radius 3 cm and height 10 cm with a hemisphere of radius 3 cm on top. Find its volume. [3]

Cylinder: π × 9 × 10 = 90π. Hemisphere: ½ × (4/3)π × 27 = 18π. Total = 108π = 339.29… = 339 cm³.

Marks: M1 for the cylinder; M1 for half a sphere; A1. Using the whole sphere is the usual slip.

Q9. A solid cone has base radius 10 cm and height 24 cm. A small cone of height 12 cm is cut off the top, parallel to the base. Find the volume of the frustum that remains. [4]

The small cone is similar with half the height, so its radius is 5 cm.

Large cone: ⅓π × 100 × 24 = 800π. Small cone: ⅓π × 25 × 12 = 100π. Frustum = 700π = 2199.1… = 2200 cm³ (3 s.f.).

Marks: B1 for radius 5; M1 for each cone volume; A1. Note that 2200 to 3 significant figures is written without a decimal point.

Q10. A chord of a circle of radius 10 cm subtends an angle of 80° at the centre. Find the area of the minor segment. [4]

Sector = (80/360) × π × 100 = 69.81… Triangle = ½ × 10 × 10 × sin 80° = 49.24… Segment = 69.81 − 49.24 = 20.57… = 20.6 cm².

Marks: M1 for the sector; M1 for the triangle using ½ab sin C; M1 for subtracting; A1. Keep unrounded values until the subtraction, or the third figure can go wrong.

Q11. A solid metal sphere of radius 6 cm is melted down and recast into small cylinders, each with radius 2 cm and height 3 cm. How many cylinders can be made? [3]

Sphere: (4/3)π × 216 = 288π. Each cylinder: π × 4 × 3 = 12π. Number = 288π ÷ 12π = 24.

Marks: M1 for each volume; A1. Leaving π in both volumes lets it cancel, which avoids rounding errors.

Where mensuration marks leak

  • Confusing slant height and vertical height in cones and pyramids.
  • Forgetting the flat faces when finding total surface area.
  • Squaring or cubing the wrong thing in unit conversions.
  • Rounding a radius early, then using the rounded value.
  • Adding the arc but not the two radii for a sector perimeter.

The method for each type is in our guides to arcs and sectors, surface area and volume of cones, spheres and pyramids, frustums and compound solids and converting area and volume units. The full strand is set out in our 0580 mensuration topic overview, and the list of formulas explained shows exactly what page 2 of the paper gives you.

Q10 needed ½ab sin C, which links straight to the trigonometry practice set. For more angle work in circles, try the circle theorem questions with reasons.

Send us the questions you got wrong

Tick the questions you got right, circle the rest, and send a photo of your working on WhatsApp (use the WhatsApp button on this page). You can also bring it to a free demo class. We will look at whether the problem was the formula, the setting-up or the rounding.

How Maths Bodhi helps

  • A free demo with a short diagnostic across all of mensuration.
  • A tutor matched to 0580, 0606, 0607, 4MA1 or 4PM1.
  • Practice with real nets and solids where it helps, and timed calculator questions for exam pace.
  • One-to-one IGCSE maths tutoring at home for Gurgaon families, with online lessons for everyone else.

Home tuition is available in Gurgaon (Gurugram). Students elsewhere in India and abroad learn with us online. You can book a free demo class.

Written and checked by the Maths Bodhi team. Facts checked against official Cambridge International and Pearson sources, November 2026.

Frequently asked questions

Which mensuration formulas are given in IGCSE maths?
The 0580 list of formulas includes the area of a triangle and circle, circumference, curved surface areas of a cylinder and cone, surface area of a sphere, and volumes of a prism, pyramid, cylinder, cone and sphere.
Is the trapezium area formula given in IGCSE?
No. In 0580, apart from the area of a triangle, formulas for area and perimeter of shapes such as the trapezium and parallelogram are not given.
What does "give your answer in terms of π" mean?
Leave π as a symbol and give the exact multiple, such as 120π cm², instead of a decimal.
How do I find the volume of a frustum?
Find the volume of the whole cone, subtract the volume of the small cone that was removed, and use similar triangles to find the small cone's radius.
How accurate should mensuration answers be?
On 0580 calculator papers, give non-exact answers to 3 significant figures unless told otherwise, and use the π key or 3.142.
Are these questions copied from past papers?
No. They are original questions written by the Maths Bodhi team in the exam style.
IGCSE mensuration practiceIGCSE surface area and volume questionsIGCSE arc and sector questions0580 mensurationIGCSE maths tutor

Related guides

Keep exploring this maths topic

IGCSE Maths18 Nov 2026

IGCSE Maths Mensuration Topics (0580 E5): Units, Area, Circles, Surface Area, Volume and Compound Shapes

The five Cambridge IGCSE 0580 mensuration sub-topics, E5.1 to E5.5, with Core and Extended differences, which formulas are printed on the paper and which you must remember, how answers in terms of π and to 3 significant figures are handled, and a study order.

IGCSE mensuration0580 area and volumeIGCSE surface area formulasarcs and sectors IGCSE

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Volume and Surface Area: Cones, Spheres, Pyramids, Cylinders and Prisms (0580 E5.4)

Volume and surface area of the six solids in Cambridge IGCSE 0580 sub-topic 5.4, which formulas are on the List of formulas, how to find a slant height, why curved and total surface area differ, and how to work backwards from a volume. Four original worked examples and a self-check.

IGCSE volume and surface areavolume of a conesurface area of a spherepyramid volume IGCSE

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Frustum Volume and Compound Shapes: Parts of Solids, Composite Areas and Cut Cones (0580 E5.5)

How to find the volume and surface area of a frustum for Cambridge IGCSE 0580, including when the full cone's height is missing, plus compound 2D shapes, compound solids and parts of solids such as a cylindrical wedge. Four original worked examples and a self-check.

IGCSE frustumcompound shapes IGCSEvolume of a frustumparts of solids

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Arc Length and Sector Area: Formulas, Reverse Questions and Segments (0580 E5.3)

How to find arc length, sector area and sector perimeter for Cambridge IGCSE 0580, what Core and Extended each expect, how to work backwards to an angle or a radius, and how Extended students find the area of a segment. Four original worked examples and a self-check.

IGCSE arc lengthsector area IGCSEarea of a segmentcircles 0580

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Maths Problem Solving Questions: 11 Unstructured Problems with Plans and Worked Answers

Eleven original unstructured IGCSE 0580 problems with no parts and no hints, each solved with a short plan first, then full working, the answer and marking notes, mixing number, algebra, geometry, mensuration and speed-time.

IGCSE problem solving practiceIGCSE unstructured questionsIGCSE multi-step problems0580 problem solving

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Unit Conversions for Area and Volume: cm² to m², cm³ to Litres and More (0580 E5.1)

Why 1 m² is 10 000 cm² and 1 m³ is a million cm³, how capacity links to volume, and how to convert units inside density, flow and rainfall problems for Cambridge IGCSE 0580 sub-topic 5.1. A full conversion table, four original worked examples and a self-check.

IGCSE unit conversionscm2 to m2cm3 to litresunits of measure 0580

By Maths Bodhi Team

Read guide