In radians, the arc length of a sector is s = rθ and its area is A = ½r²θ, where r is the radius and θ is the angle at the centre. Those two formulas are the whole of Topic 9 of Cambridge IGCSE Additional Mathematics, and they are not printed in the List of formulas, so you must know them. The difficulty is not the formulas but the shapes: segments, sectors joined to triangles, and regions bounded by tangents.
If radians still feel like a foreign unit, a few sessions of Additional Maths tuition with plenty of drawn diagrams usually changes that.
The syllabus point
Topic 9, Circular measure, has one learning outcome in the 2025–2027 syllabus: 9.1, solve problems involving the arc length and sector area of a circle, including knowledge and use of radian measure. The notes say radian measure is expected, problems may involve compound shapes, and the formulas are not given.
0606 is not split into Core and Extended, so the topic applies to every candidate and may be tested on non-calculator Paper 1 or calculator Paper 2. In 0580 you met arcs and sectors in degrees, as in our 0580 arcs and sectors guide; 0606 works in radians. For the full list of topics, see the 0606 topic list.
What a radian is
One radian is the angle at the centre when the arc length equals the radius. A full turn is an arc of 2πr, so it is 2π radians:
- 2π rad = 360° and π rad = 180°
- degrees to radians: multiply by π/180
- radians to degrees: multiply by 180/π
| Degrees | 30° | 45° | 60° | 90° | 120° | 135° | 180° | 270° |
|---|---|---|---|---|---|---|---|---|
| Radians | π/6 | π/4 | π/3 | π/2 | 2π/3 | 3π/4 | π | 3π/2 |
Why the formulas work
A sector with angle θ is the fraction θ/(2π) of the whole circle. So its arc is (θ/2π) × 2πr = rθ, and its area is (θ/2π) × πr² = ½r²θ. If you forget them in the exam, this one line rebuilds them.
Worked example 1: converting and a basic sector
(a) Convert 135° to radians and 2.4 radians to degrees. (b) A sector has radius 8 cm and angle 1.2 radians. Find its arc length, area and perimeter.
(a) 135 × π/180 = 3π/4. 2.4 × 180/π = 137.5° (1 d.p.).
(b) Arc s = 8 × 1.2 = 9.6 cm.
Area = ½ × 8² × 1.2 = 38.4 cm².
Perimeter = two radii plus the arc = 8 + 8 + 9.6 = 25.6 cm.
Forgetting the two radii in a perimeter is the most common lost mark in this topic.
Worked example 2: area of a segment, exactly
A chord AB subtends an angle of π/3 at the centre O of a circle of radius 10 cm. Find the exact area of the minor segment, then its value to 3 s.f.
Segment = sector − triangle OAB.
Sector = ½ × 10² × π/3 = 50π/3.
Triangle = ½ × 10 × 10 × sin(π/3) = 50 × √3/2 = 25√3.
Segment = 50π/3 − 25√3 cm², which is 9.06 cm² (3 s.f.).
On Paper 1, the exact form is the answer; you need sin(π/3) = √3/2 without a calculator. The triangle uses ½ab sin C, which is in the List of formulas.
Worked example 3: two conditions, two unknowns
A sector has perimeter 30 cm and area 50 cm². Find the possible values of the radius r and the angle θ.
Perimeter: 2r + rθ = 30, so rθ = 30 − 2r.
Area: ½r²θ = 50. Write r²θ as r(rθ): ½r(30 − 2r) = 50.
So 15r − r² = 50, giving r² − 15r + 50 = 0 and (r − 5)(r − 10) = 0.
- r = 5: rθ = 20, so θ = 4 radians.
- r = 10: rθ = 10, so θ = 1 radian.
Both are valid, because both angles are less than 2π ≈ 6.28. Always check this; an angle above 2π would be rejected. The step "write r²θ as r(rθ)" turns the problem into a quadratic, linking this topic to the algebra in Topic 2 quadratics.
Worked example 4: a region bounded by a tangent
OAB is a sector of a circle with centre O, radius 6 cm and angle AOB = 1.1 radians. The tangent to the circle at A meets OB extended at T. Find the area and the perimeter of the region bounded by AT, TB and the arc AB.
Angle OAT is a right angle, because a tangent is perpendicular to the radius.
Lengths in triangle OAT:
- AT = 6 tan 1.1 = 11.789 cm
- OT = 6 ÷ cos 1.1 = 13.228 cm, so BT = OT − 6 = 7.228 cm
- arc AB = 6 × 1.1 = 6.6 cm
Area = triangle OAT − sector OAB = ½ × 6 × 11.789 − ½ × 6² × 1.1 = 35.366 − 19.8 = 15.6 cm² (3 s.f.).
Perimeter = AT + BT + arc AB = 11.789 + 7.228 + 6.6 = 25.6 cm (3 s.f.).
The calculator must be in radian mode for tan 1.1 and cos 1.1. In degree mode you would get very different values without noticing.
Calculator and non-calculator handling
| Situation | Paper 1 (no calculator) | Paper 2 (calculator) |
|---|---|---|
| Angle form | Multiples of π such as π/3 | Decimals such as 1.1 rad |
| Answers | Exact, with π and surds | 3 significant figures |
| Trig values | Exact values at π/6, π/4, π/3 | Calculator in radian mode |
| Typical shape | Sector minus triangle | Tangents, chords, several regions |
Keep full values in the calculator in multi-step shape questions, as in Example 4, and round only at the end.
Mistakes our tutors see
- Degree mode when the angle is in radians.
- Using s = rθ with θ in degrees.
- Perimeter without the radii, or with the chord instead of the arc.
- Segment area found as sector plus triangle instead of minus.
- Rounding mid-question, which moves the final answer.
- Missing the right angle where a tangent meets a radius.
- Major and minor sectors confused: the major sector angle is 2π − θ.
When to get help with this topic
- You know the formulas but cannot split a compound shape into sectors and triangles.
- Questions that give the perimeter or area and ask for r or θ leave you stuck.
- You lose marks for exact forms on Paper 1.
- You are not fully sure what a radian is, so conversions feel like memorised rules.
Self-check
- Convert 210° to radians and 0.8 radians to degrees.
- A sector has radius 12 cm and angle π/4. Find the exact arc length and area.
- An arc of length 15 cm lies on a circle of radius 6 cm. Find the angle in radians and the sector area.
- Find the area of the minor segment cut off by a chord that subtends 2 radians at the centre of a circle of radius 8 cm.
Answers. 1: 7π/6 and 45.8°. 2: arc 3π cm, area 18π cm². 3: θ = 15/6 = 2.5 rad, area = ½ × 36 × 2.5 = 45 cm². 4: ½ × 64 × (2 − sin 2) = 34.9 cm² (3 s.f.).
Where this leads
Radians are the default unit for the rest of 0606 trigonometry: graphs, identities and equations are often set over domains such as 0 ≤ x ≤ 2π. Our guide to 0606 trigonometric identities and equations uses them throughout, and the coordinate geometry of circles uses the same tangent–radius right angle. In calculus, derivatives of sin x and cos x only work in radians, which the 0606 differentiation guide explains.
In IB AA, radians, arcs and sectors open the unit-circle work in our AA trigonometry guide.
How Maths Bodhi helps
Circular measure is a diagram topic, so our tutors ask students to mark every radius, right angle and arc on the figure before writing any formula. The free demo includes one compound-shape question to see how the student splits it up. Students outside Gurgaon can join live online IGCSE classes with the same approach.
Home tuition is available in Gurgaon (Gurugram). Students elsewhere in India and abroad learn with us online. You can book a free demo class.
Written and checked by the Maths Bodhi team. Facts checked against official Cambridge International and Pearson sources, November 2026.
Frequently asked questions
- What is circular measure in IGCSE Additional Maths?
- It is Topic 9 of 0606: arc length and sector area problems using radian measure, including compound shapes made of sectors, triangles and segments.
- Are the arc length and sector area formulas given in 0606?
- No. The syllabus says the formulas are not given, so you must know s = rθ and A = ½r²θ with θ in radians.
- How do you convert degrees to radians?
- Multiply by π/180. To convert radians to degrees, multiply by 180/π. For example, 135° is 3π/4 radians.
- How do you find the area of a segment?
- Subtract the area of the triangle formed by the two radii and the chord from the area of the sector: ½r²θ − ½r² sin θ, with θ in radians.
- Why must my calculator be in radian mode?
- When the angle is given in radians, trig values such as tan 1.1 are completely different in degree mode, and every later answer will be wrong.
