WhatsApp us
IGCSE Maths18 Nov 2026

IGCSE Maths Geometry Topics (0580 E4): Terms, Constructions, Bearings, Similarity, Symmetry, Angles and Circle Theorems

A map of all eight Cambridge IGCSE 0580 geometry sub-topics, E4.1 to E4.8, with exactly what changes between Core and Extended, how geometry is tested on the non-calculator and calculator papers, how to write reasons that earn marks, and the order we teach the strand.

IGCSE Maths Geometry Topics (0580 E4): Terms, Constructions, Bearings, Similarity, Symmetry, Angles and Circle Theorems

Geometry is topic area 4 of Cambridge IGCSE Mathematics 0580, and it has eight sub-topics: geometrical terms (4.1), constructions (4.2), scale drawings and bearings (4.3), similarity (4.4), symmetry (4.5), angles (4.6), circle theorems I (4.7) and circle theorems II (4.8). Core and Extended share the same headings for the first seven, but Extended goes further in four of them, and 4.8 is Extended only.

What makes this strand different from the rest of 0580 is the reason. Many geometry questions ask you to give a geometric reason for each angle, using the properties listed in the syllabus. A correct number with no reason may not score full marks. If your child keeps losing marks on reasons, a tutor from our Cambridge IGCSE maths team can fix the habit early.

The eight sub-topics: Core vs Extended

This follows the 2025–2027 syllabus, used for exams in 2025, 2026 and 2027.

RefSub-topicCoreWhat Extended adds
4.1Geometrical termsPoints, lines, angle types, triangles, quadrilaterals, polygons, nets, simple solids, circle vocabularyThe terms plane and perpendicular bisector; hemisphere and frustum; major and minor arcs
4.2Geometrical constructionsMeasure and draw lines and angles; construct a triangle from three sides with ruler and compasses; netsNothing extra
4.3Scale drawingsDraw and interpret scale drawings; three-figure bearingsNothing extra
4.4SimilarityCalculate lengths of similar shapesArea and volume relationships; show two triangles are similar with geometric reasons
4.5SymmetryLine and rotational symmetry in 2DSymmetry of prisms, cylinders, pyramids and cones (planes and axes)
4.6AnglesAngles at a point, on a line, in triangles and quadrilaterals; parallel lines; regular polygonsIrregular polygons too
4.7Circle theoremsAngle in a semicircle; tangent and radiusAngle at the centre; same segment; cyclic quadrilateral; alternate segment theorem
4.8Circle theorems IINot in CoreEqual chords; perpendicular bisector of a chord; tangents from an external point

Two notes from the syllabus are worth knowing. Candidates are not expected to show that two shapes are congruent, although the word congruent is still used. And constructions of perpendicular bisectors and angle bisectors are not required at either tier.

What older books and papers may still include

Many families use textbooks, topic packs and past papers written for earlier versions of 0580. That is fine for practice, but it means students sometimes spend hours on material that the current syllabus does not list. Three checks save time:

  • Congruence proofs. The 2025 change list says congruence criteria were removed from Extended, while knowledge of congruence itself stays. Recognising congruent shapes is enough.
  • Bisector constructions and loci. Neither is listed in the 2025–2027 content. If a worksheet asks for the locus of points equidistant from two lines, it was probably written for an older syllabus or a different board.
  • Tier boundaries. A Core student who works from an Extended book may meet cyclic quadrilaterals or the alternate segment theorem and think they are behind. They are not: those are Extended only.

When in doubt, check the sub-topic number against the syllabus on the Cambridge website, or ask your teacher which syllabus year the school is using.

Each sub-topic in brief

4.1 and 4.2 Terms and constructions

The vocabulary list is long, but it is the language of every other question: a student who mixes up a chord and a tangent, or a rhombus and a kite, cannot follow the question. Constructions are now narrow: draw and measure, construct a triangle from three sides showing the arcs, and work with nets. Our guide to IGCSE constructions, nets and what happened to loci explains exactly what is still examined.

4.3 Scale drawings and bearings

Three-figure bearings, measured clockwise from north, and scale drawings with a ruler. Bearings questions often lead into trigonometry on the calculator paper. See our IGCSE bearings guide for back bearings and the north-line method.

4.4 Similarity

Core: find missing lengths in similar shapes. Extended: use the scale factor for area (k²) and volume (k³), and prove two triangles are similar with reasons. The guide to similar shapes with area and volume scale factors has the reverse questions that cost the most marks.

4.5 Symmetry

Lines of symmetry and order of rotational symmetry for 2D shapes at both tiers; planes and axes of symmetry for solids at Extended. Our symmetry in 2D and 3D guide has a reference table for quadrilaterals and prisms.

4.6 Angles

Angle facts, parallel lines and polygons. Three-letter notation such as angle ABC is required, and the syllabus expects correct terms in reasons: "alternate angles are equal", not "Z angles". The guide to angles in polygons and parallel lines includes an irregular polygon example for Extended.

4.7 and 4.8 Circle theorems

Core has only two circle facts; Extended has nine across the two sub-topics. Start with the main IGCSE circle theorems guide for the centre, semicircle, same-segment and tangent facts, then move to the guide on the alternate segment theorem, cyclic quadrilaterals and chord symmetry for the harder Extended set.

Writing reasons that earn marks

Here is a short example in our own numbers, showing the layout we teach.

Lines AB and CD are parallel, with A and C on the same side. A line crosses AB at P and CD at Q. Angle BPQ = 64°. Find angle PQD and angle PQC, giving reasons.

  • Angle PQC = 64°, because alternate angles are equal (angles BPQ and PQC lie on opposite sides of the crossing line, between the parallel lines).
  • Angle PQD = 180° − 64° = 116°, because angles on a straight line add up to 180°.
  • Check: angle BPQ + angle PQD = 64° + 116° = 180°, which agrees with co-interior angles are supplementary.

Good reasons have three features: they name the property in syllabus words, they say which angles they apply to when it is not obvious, and there is one reason per step. "Because of parallel lines" is too vague to be credited.

How geometry is examined

From 2025, Core sits Paper 1 (non-calculator) and Paper 3 (calculator), each 1 hour 30 minutes and 80 marks. Extended sits Paper 2 (non-calculator) and Paper 4 (calculator), each 2 hours and 100 marks. Geometry can appear on any of them.

Non-calculator papers. Angle chasing, polygons, circle theorems, symmetry and scale factors are natural Paper 1 and Paper 2 content, because the arithmetic is light and the marks are in the reasoning. Our guide to the Extended non-calculator paper covers the wider paper.

Calculator papers. Bearings with trigonometry, similar solids with awkward scale factors, and constructions with measurement tend to sit on Papers 3 and 4. Non-exact answers are given to 3 significant figures, and angles in degrees to 1 decimal place, unless the question says otherwise.

Equipment. Compasses, a protractor and a ruler are needed for every paper. Tracing paper may be requested during the exam, but you cannot bring your own.

A study order that works

This is our advice, based on how the ideas depend on each other.

  1. Terms and vocabulary (4.1). Build a one-page glossary with sketches.
  2. Angle facts and parallel lines (4.6). With written reasons from day one.
  3. Polygons (4.6). Exterior angles first; interior angles follow.
  4. Symmetry (4.5). Quick once the shape properties are known.
  5. Constructions and nets (4.2). A short practical block with compasses.
  6. Scale drawings and bearings (4.3). Then link bearings to trigonometry.
  7. Similarity (4.4). Lengths first; then area and volume factors for Extended.
  8. Circle theorems (4.7). Semicircle and tangent for all; the rest for Extended.
  9. Circle theorems II (4.8). Extended only.
  10. Mixed reasoning questions. Finish with sets like our geometry and circle theorems practice questions.

Common traps across the strand

  • Assuming a diagram is accurate. Most exam diagrams say "not to scale". Measure only when asked.
  • Using "Z angles" or "F angles" in reasons instead of alternate or corresponding.
  • Interior and exterior angle mix-ups in polygons.
  • Applying k instead of k² or k³ to areas and volumes.
  • Treating a line as a tangent or a diameter without a reason from the question.
  • Missing a north line at the second point in a bearings question.

How the strand connects to the rest of 0580

Geometry feeds three other strands. Similarity and nets lead straight into mensuration; our 0580 mensuration topics guide picks up areas and volumes. Bearings and angle facts lead into the 0580 trigonometry strand, where the sine and cosine rules do the calculating. And symmetry links to reflections and rotations in the guide to describing transformations fully.

How Maths Bodhi helps

In the free demo, our tutor asks the student to solve two angle questions and say each reason aloud. That shows quickly whether the problem is knowing the facts, choosing the right one, or writing it in exam language. Tutors are matched to Core or Extended, and progress is tracked through written reasons on exam-style questions, not just correct answers. Read more about our IGCSE maths tutors for home and online lessons.

Home tuition is available in Gurgaon (Gurugram). Students elsewhere in India and abroad learn with us online. You can book a free demo class.

Written and checked by the Maths Bodhi team. Facts checked against official Cambridge International and Pearson sources, November 2026.

Frequently asked questions

What geometry topics are in IGCSE maths 0580?
Eight sub-topics: geometrical terms, constructions, scale drawings and bearings, similarity, symmetry, angles, circle theorems I and circle theorems II. Circle theorems II is Extended only.
Are loci in the IGCSE 0580 syllabus?
Loci are not listed in the 0580 2025–2027 syllabus content, and constructions of perpendicular bisectors and angle bisectors are stated as not required. Check older books and papers against the current syllabus.
Which circle theorems are in IGCSE Core?
Only two: the angle in a semicircle is 90°, and the angle between a tangent and a radius is 90°. The other circle theorems are Extended.
Do I need to prove triangles are congruent in IGCSE maths?
No. The 0580 syllabus says candidates are not expected to show that two shapes are congruent. Extended students may need to show two triangles are similar using geometric reasons.
How do I write reasons in IGCSE geometry questions?
Name the property in the syllabus words, such as "alternate angles are equal" or "angles in the same segment are equal", and give one reason for each step.
Is geometry on the IGCSE non-calculator paper?
Yes. Geometry can appear on any paper, and angle, polygon and circle theorem questions suit the non-calculator Papers 1 and 2 because the marks are mostly in the reasoning.
IGCSE geometry0580 geometry syllabusIGCSE circle theorems and anglesCore vs Extended geometryIGCSE maths tutor

Related guides

Keep exploring this maths topic

IGCSE Maths18 Nov 2026

IGCSE Constructions, Nets and Loci: What Cambridge 0580 Still Examines (E4.1–E4.2)

What the 2025–2027 Cambridge IGCSE 0580 syllabus actually asks for in constructions, from measuring angles to constructing a triangle from three sides and using nets, why loci and bisector constructions are not listed, four original worked examples, and a self-check.

IGCSE constructionsIGCSE locinets of solids IGCSEruler and compasses triangle

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Angles in Polygons and Parallel Lines: Interior and Exterior Angles, Angle Sums and Reasons (0580 E4.6)

Angle facts for Cambridge IGCSE 0580 sub-topic 4.6: angles at a point and on a line, triangles and quadrilaterals, corresponding, alternate and co-interior angles, and interior and exterior angles of regular and irregular polygons. Four original worked examples with reasons in exam language.

IGCSE angles in polygonsinterior and exterior anglesangles in parallel linesgeometric reasons IGCSE

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Circle Theorem Questions: 12 Geometry Practice Questions with Reasons and Answers

Twelve original IGCSE 0580 geometry questions covering polygons, parallel lines, all the circle theorems, tangents, chords and similarity, with the angle, the written reason and a marking note for each.

IGCSE circle theorems practiceIGCSE geometry questionsangle reasons IGCSE0580 circle theorems

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Symmetry: Lines and Rotational Symmetry in 2D, Planes and Axes of Symmetry in 3D (0580 E4.5)

Line symmetry and order of rotational symmetry for triangles, quadrilaterals and polygons, then planes and axes of symmetry for prisms, cylinders, pyramids and cones, as set out in Cambridge IGCSE 0580 sub-topic 4.5. Reference tables, four original worked examples and a self-check.

IGCSE symmetryrotational symmetry orderplanes of symmetrysymmetry of quadrilaterals

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Bearings and Scale Drawings: Three-Figure Bearings, Back Bearings and Map Scales (0580 E4.3)

How three-figure bearings work in Cambridge IGCSE 0580, the north-line method for back bearings and angles inside a triangle, how to use map scales both ways, and when bearings questions need trigonometry. Four original worked examples and a self-check.

IGCSE bearingsthree-figure bearingsback bearingsscale drawings IGCSE

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

Alternate Segment Theorem, Cyclic Quadrilaterals and Tangent and Chord Properties for IGCSE (0580 E4.7–E4.8)

The harder Extended circle properties in Cambridge IGCSE 0580: opposite angles of a cyclic quadrilateral, the alternate segment theorem, tangents from an external point, equal chords and the perpendicular bisector of a chord. How to spot each one, four original worked examples and a self-check.

alternate segment theoremcyclic quadrilateral IGCSEtangents from an external pointchord properties circle

By Maths Bodhi Team

Read guide