A bearing is a direction measured clockwise from north, written with three figures, from 000° to 360°. So due east is 090°, due south is 180° and a direction just west of north might be 350°. In Cambridge IGCSE 0580, bearings and scale drawings make up sub-topic 4.3, and the content is the same for Core and Extended.
The topic looks easy, and the basic questions are. The marks are lost when two bearings meet in one triangle, because students forget to draw a north line at the second point. If that sounds familiar, our 0580 tutors at Maths Bodhi can work through it with the diagram method below.
What the syllabus covers
| Ref | Skill | Core | Extended |
|---|---|---|---|
| 4.3.1 | Draw and interpret scale drawings | Yes | Yes |
| 4.3.2 | Use and interpret three-figure bearings | Yes | Yes |
| – | Understand north, east, south and west, e.g. "due east of" | Yes | Yes |
A ruler must be used for all straight edges. Bearings questions also connect with angle facts from 4.6, especially "co-interior angles add up to 180°", because two north lines are always parallel. For the rest of the strand, see our IGCSE geometry topics guide.
The three rules
- Start at north. Draw a north arrow at the point you are measuring from.
- Turn clockwise. Measure the angle from north, turning clockwise, to the line joining the two points.
- Use three figures. 45° is written 045°.
"The bearing of B from A" means stand at A and look towards B. The word after "from" tells you where to draw the north line.
Worked example 1: back bearings
(a) The bearing of Q from P is 064°. Find the bearing of P from Q.
The return direction is exactly opposite, which is a half turn. Add 180°:
064° + 180° = 244°.
(b) The bearing of S from R is 290°. Find the bearing of R from S.
Adding 180° gives 470°, which is more than 360°, so subtract instead:
290° − 180° = 110°.
Rule of thumb: if the bearing is less than 180°, add 180°. If it is 180° or more, subtract 180°. The two north lines are parallel, so this is really the co-interior angle fact in disguise.
Worked example 2: scale drawings and map scales
(a) A map has scale 1 : 50 000. Two villages are 7.4 cm apart on the map. Find the real distance in kilometres.
Real distance = 7.4 × 50 000 = 370 000 cm.
There are 100 000 cm in 1 km, so this is 3.7 km.
(b) A plan uses a scale of 1 : 20 000. A path is 2.6 km long. How long is it on the plan?
2.6 km = 260 000 cm. Plan length = 260 000 ÷ 20 000 = 13 cm.
Most errors in scale questions come from units, not the scale. Convert everything to centimetres first, then divide or multiply. For more on changing units, see our units of measure and conversions guide.
Worked example 3: a bearing that needs trigonometry (calculator)
A boat sails 9 km due east from a harbour H, then 12 km due south to a buoy B. Find (a) the distance HB, (b) the bearing of B from H, (c) the bearing of H from B.
Sketch first: east then south makes a right-angled triangle with the right angle at the turning point.
(a) HB = √(9² + 12²) = √225 = 15 km.
(b) At H, the angle between the east line and HB is found with tan: tan θ = 12/9, so θ = 53.13°. East is 090°, and the boat ends up south of east, so the bearing is 090° + 53.13° = 143.13°, which is 143.1° to 1 decimal place.
You can also work from south: the angle between south and HB has tan = 9/12, so it is 36.87°, and 180° − 36.87° = 143.1°. Two routes, same answer, which is a good check.
(c) Back bearing: 143.1° + 180° = 323.1°.
The trigonometry here is right-angled; our guide to SOHCAHTOA in IGCSE covers it. When the triangle has no right angle, Extended students use the sine rule and cosine rule.
Worked example 4: angles inside a bearings triangle (non-calculator)
B is on a bearing of 050° from A. C is on a bearing of 130° from B. AB = BC. Find angle ABC and the bearing of C from A.
Step 1: draw a north line at B. This is the step students skip.
Step 2: find the bearing of A from B. It is the back bearing of 050°: 050° + 180° = 230°.
Step 3: find angle ABC. At B, the direction to A is 230° and the direction to C is 130°. The angle between them is 230° − 130° = 100°.
Step 4: use the isosceles triangle. AB = BC, so the angles at A and C are equal: (180° − 100°)/2 = 40° each.
Step 5: bearing of C from A. At A, the line to B is on 050°. The line to C is turned a further 40° clockwise (C is to the right of AB when you face B), so the bearing is 050° + 40° = 090°. C is due east of A.
Every step uses an angle fact and needs a reason in the exam: "angles on a straight line", "co-interior angles", "base angles of an isosceles triangle are equal". The guide to angle facts in polygons and parallel lines shows how to phrase them.
Calculator and non-calculator papers
Papers 1 and 2. Expect back bearings, scale conversions, measuring bearings on a printed diagram with a protractor, and angle-chasing like example 4.
Papers 3 and 4. Expect bearings combined with Pythagoras or trigonometry, giving distances to 3 significant figures and bearings to 1 decimal place. Keep full calculator values between parts.
On any paper, a question may ask you to measure a bearing from a scale drawing. Put the protractor's centre exactly on the point, line up zero with your north line, and read the clockwise scale.
Mistakes our tutors see
- Measuring anticlockwise, or from east instead of north.
- Two-figure bearings, such as 45° instead of 045°.
- No north line at the second point, so the angle inside the triangle is wrong.
- Mixing up "from": the bearing of A from B is not the same as the bearing of B from A.
- Unit slips in scales, such as treating 1 km as 1000 cm.
- Reading the wrong scale on a two-scale protractor.
When to get help
Signs to watch for:
- One-step bearings are fine, but any question with two bearings goes wrong.
- The student does not draw a sketch, or draws one with no north lines.
- Scale questions fail because of unit conversion rather than the scale itself.
- Bearings plus trigonometry on Paper 4 regularly loses the final mark for the wrong quadrant.
Self-check
- The bearing of X from Y is 315°. Find the bearing of Y from X.
- Write down the bearing of due south-west.
- On a map with scale 1 : 25 000, two points are 4.5 cm apart. Find the real distance in km.
- Y is 6 km east and 8 km north of X. Find the bearing of Y from X.
- The bearing of K from L is 158°. Find the bearing of L from K.
Answers. 1: 135°. 2: 225°. 3: 4.5 × 25 000 = 112 500 cm = 1.125 km. 4: tan θ = 6/8 gives θ = 36.9°, so 036.9°. 5: 338°.
Where it leads
Bearings are the most common setting for non-right-angled trigonometry on Paper 4, and they return in IB and A level mechanics as directions of motion. Before that, they connect to scale factors in similar shapes, because a map scale is a scale factor in disguise. Practice with the instruments themselves is covered in our guide to IGCSE constructions and nets.
How Maths Bodhi helps
In the free demo, our tutor sets one two-bearing question and asks the student to sketch before calculating. Whether the north line appears at the second point tells us most of what we need to know. Tutors are matched to 0580 Core or Extended, and progress is tracked through the written method and diagrams on exam-style questions. Students outside Gurgaon can learn with an IGCSE tutor online.
Home tuition is available in Gurgaon (Gurugram). Students elsewhere in India and abroad learn with us online. You can book a free demo class.
Written and checked by the Maths Bodhi team. Facts checked against official Cambridge International and Pearson sources, November 2026.
Frequently asked questions
- How do you work out bearings in IGCSE maths?
- Draw a north line at the point you are measuring from, turn clockwise from north to the line joining the two points, and write the angle with three figures, such as 064°.
- How do you find a back bearing?
- Add 180° if the original bearing is less than 180°, or subtract 180° if it is 180° or more. For example, the back bearing of 290° is 110°.
- Are bearings in IGCSE Core and Extended?
- Yes. Scale drawings and three-figure bearings (sub-topic 4.3) are the same for Core and Extended in the 0580 2025–2027 syllabus.
- Why do bearings have three figures?
- Three figures make every direction unambiguous, from 000° to 360°. A bearing of 45° is written 045° so it cannot be misread.
- Do bearings questions need trigonometry?
- Simple ones do not. On calculator papers, bearings are often combined with Pythagoras, right-angled trigonometry or, for Extended, the sine and cosine rules.
- What is the bearing of due west?
- Due west is 270°. North is 000°, east is 090°, south is 180° and west is 270°.
