WhatsApp us
IGCSE Maths18 Nov 2026

IGCSE Constructions, Nets and Loci: What Cambridge 0580 Still Examines (E4.1–E4.2)

What the 2025–2027 Cambridge IGCSE 0580 syllabus actually asks for in constructions, from measuring angles to constructing a triangle from three sides and using nets, why loci and bisector constructions are not listed, four original worked examples, and a self-check.

IGCSE Constructions, Nets and Loci: What Cambridge 0580 Still Examines (E4.1–E4.2)

In Cambridge IGCSE Mathematics 0580, constructions are now a short, practical topic. You need to measure and draw lines and angles, construct a triangle from its three side lengths using only a ruler and compasses (showing the arcs), and draw and use nets of solids. The 2025–2027 syllabus states that constructions of perpendicular bisectors and angle bisectors are not required, and loci are not listed in the content at all.

That is good news for students, but confusing when older textbooks still have full chapters on loci. This guide explains what is examined, what to skip and how to get the marks that remain. If your child would like a tutor who plans from the current 0580 list, see our IGCSE Cambridge tutoring.

What sub-topics E4.1 and E4.2 contain

RefContentCoreExtended
4.1Geometrical terms: angles, triangles, quadrilaterals, polygons, nets, solids, circle vocabularyYes (simple solids)Yes, plus plane, perpendicular bisector, hemisphere, frustum, major and minor arc
4.2.1Measure and draw lines and anglesYesYes
4.2.2Construct a triangle given all three sides, with ruler and compasses onlyYesYes
4.2.3Draw, use and interpret netsYesYes
Not requiredPerpendicular bisector and angle bisector constructions––

Two syllabus notes shape how marks are given: a ruler should be used for all straight edges, and construction arcs must be shown. A perfect triangle with no visible arcs is not a construction.

For where this sits among the other geometry sub-topics, see our 0580 geometry strand overview.

What happened to loci?

Many revision books and worksheets still in use include loci: the set of points a fixed distance from a point, equidistant from two points, or equidistant from two lines. None of those appears in the 2025–2027 content list, and the bisector constructions they rely on are stated as not required.

What still matters is the idea behind them, which turns up elsewhere:

  • "Perpendicular bisector" is a term Extended students must know (4.1), and its equation is found in coordinate geometry (3.7).
  • "The perpendicular bisector of a chord passes through the centre" is an Extended circle property (4.8).
  • "Equidistant" appears in that same circle sub-topic: equal chords are equidistant from the centre.

So if your book has a loci chapter, read it for understanding, but do not spend revision hours practising locus constructions for 0580. If you take a different syllabus, such as Edexcel 4MA1 or Cambridge 0607, check that syllabus's own list.

Worked example 1: construct a triangle from three sides

Construct triangle ABC with AB = 8 cm, AC = 6 cm and BC = 5 cm. Then measure angle ACB.

  1. Draw AB = 8 cm with a ruler. Label both ends.
  2. Set the compasses to 6 cm. With the point on A, draw an arc above AB.
  3. Set the compasses to 5 cm. With the point on B, draw an arc that crosses the first one. The crossing is C.
  4. Join AC and BC with a ruler. Leave both arcs visible.

Measuring angle ACB with a protractor should give about 93°. We can check this with the cosine rule: cos C = (6² + 5² − 8²)/(2 × 6 × 5) = −3/60, so C = 92.9°. If your measurement is more than a degree or two away from this, redraw the arcs more carefully.

Before constructing, check the triangle exists: the two shorter sides must add to more than the longest. Here 6 + 5 = 11 > 8. ✓

Worked example 2: a rhombus from two triangles

Construct a rhombus PQRS with sides 5 cm and diagonal PR = 8 cm. Find the length of the other diagonal.

A rhombus is two congruent isosceles triangles sharing a diagonal.

  1. Draw PR = 8 cm.
  2. With compasses set to 5 cm, draw arcs from P and from R, above and below PR.
  3. The crossings above and below are Q and S. Join the four sides with a ruler.

The diagonals of a rhombus bisect each other at right angles, so half of QS is √(5² − 4²) = 3 cm, and QS = 6 cm. Measuring your drawing is a good accuracy check.

Worked example 3: nets and what you can calculate from them

(a) A cuboid measures 4 cm by 3 cm by 2 cm. Find the total area of its net and its volume.

A cuboid's net has six rectangles in three matching pairs: 4 × 3, 4 × 2 and 3 × 2.

Area of net = 2(12 + 8 + 6) = 52 cm², which is the cuboid's surface area. Volume = 4 × 3 × 2 = 24 cm³.

(b) A net is made of two right-angled triangles with sides 3 cm, 4 cm and 5 cm, and three rectangles, each 10 cm long. What solid does it fold into? Find its surface area and volume.

Two identical triangles and three rectangles fold into a triangular prism.

  • Triangles: 2 × ½ × 3 × 4 = 12 cm².
  • Rectangles: 3 × 10 + 4 × 10 + 5 × 10 = 120 cm².
  • Surface area = 132 cm². Volume = cross-section × length = 6 × 10 = 60 cm³.

The syllabus lists using measurements from nets to find volumes and surface areas, so this crossover with mensuration is fair game. Our guide to surface area and volume of cones, spheres and pyramids continues from here.

Worked example 4: construct, then calculate

Construct an isosceles triangle with sides 7 cm, 7 cm and 4 cm. Use your drawing to explain why the line from the top vertex to the midpoint of the base is a line of symmetry, then find the area.

Construct as in example 1, with the 4 cm side as the base. The two 7 cm sides are equal, so the triangle is symmetrical about the line from the top vertex to the base midpoint, and that line meets the base at 90°.

Height = √(7² − 2²) = √45 ≈ 6.708 cm.

Area = ½ × 4 × 6.708... = 13.4 cm² (3 s.f.).

On a non-calculator paper, you would leave the area as 2√45 = 6√5 cm².

Calculator or not?

Constructions themselves need no calculator. They can appear on any paper because the skill is with compasses and ruler. Where a calculator matters is the follow-up: using a measurement in an area or a trigonometry calculation, or checking a measured angle. On Papers 1 and 2, any calculation after a construction will use friendly numbers or ask for an exact answer.

Compasses, a protractor and a ruler are needed for every paper. Bring a sharp pencil and compasses that hold their setting, because loose compasses cause most construction errors. Our guide to IGCSE exam equipment and rules has the full list.

Mistakes our tutors see

  1. Rubbing out the arcs to make the drawing look tidy.
  2. Freehand sides. Every straight edge needs a ruler.
  3. Measuring from the wrong zero on the protractor, so 93° is read as 87°.
  4. Compasses slipping between the two arcs.
  5. Mixing up the solid's name: a prism has a uniform cross-section; a pyramid comes to a point.
  6. Confusing rhombus, kite and parallelogram in a description question.
  7. Practising locus constructions for hours when they are not in the current list.

When to get help

Signs that a student needs support on this topic:

  • Drawings are consistently a few millimetres or degrees out, which suggests a technique problem with the instruments.
  • The student cannot picture how a net folds, or which edges meet.
  • Vocabulary such as chord, segment, sector, frustum and plane is mixed up, which then spoils other questions.
  • Revision time is going into topics from an older syllabus.

Self-check

  1. Can you construct a triangle with sides 3 cm, 4 cm and 8 cm? Explain.
  2. Name the quadrilateral whose diagonals bisect each other at right angles and whose sides are all equal.
  3. A cube has a net of six squares of side 3 cm. Find the cube's surface area.
  4. You construct a triangle with all sides 6 cm. What should each angle measure?
  5. Which instruments must you have for every 0580 paper?

Answers. 1: No, because 3 + 4 = 7 is less than 8, so the arcs never meet. 2: Rhombus. 3: 6 × 9 = 54 cm². 4: 60°. 5: Compasses, a protractor and a ruler; tracing paper can be requested during the exam.

Where it leads

Accurate drawing leads straight into scale drawings and bearings; see our guide to scale drawings and three-figure bearings. Nets lead into surface area. The idea of matching shapes leads to similar shapes and scale factors. And the vocabulary of 4.1 is assumed in every geometry, mensuration and trigonometry question that follows.

How Maths Bodhi helps

In the free demo, our tutor asks the student to construct one triangle and fold one net in their head. It takes ten minutes and shows whether the gap is with instruments, spatial sense or vocabulary. Lessons follow the current 0580 list, so time is not wasted on removed content, and work is checked against the drawing rules examiners use. Our Grade 9 IGCSE maths tutoring is often where these foundations are set.

Home tuition is available in Gurgaon (Gurugram). Students elsewhere in India and abroad learn with us online. You can book a free demo class.

Written and checked by the Maths Bodhi team. Facts checked against official Cambridge International and Pearson sources, November 2026.

Frequently asked questions

Are loci in IGCSE maths 0580?
Loci are not listed in the 0580 2025–2027 syllabus content, and the syllabus states that perpendicular bisector and angle bisector constructions are not required. Older books may still include them.
What constructions do I need for IGCSE maths?
Measure and draw lines and angles, construct a triangle from three given sides using only a ruler and compasses, and draw and use nets of solids such as cubes, cuboids, prisms and pyramids.
Do I have to show construction arcs in IGCSE?
Yes. The syllabus says construction arcs must be shown and a ruler should be used for all straight edges. Do not rub the arcs out.
Is constructing a perpendicular bisector in IGCSE 0580?
The construction is not required in 0580 2025–2027. Extended students still need the term, its equation in coordinate geometry and the circle property that a chord's perpendicular bisector passes through the centre.
What equipment do I need for IGCSE maths constructions?
A pair of compasses, a protractor and a ruler for every paper, plus a sharp pencil. Tracing paper can be requested during the exam, but you cannot bring your own.
Can a triangle be constructed from any three lengths?
No. The two shorter sides must add up to more than the longest side, otherwise the arcs never meet and no triangle exists.
IGCSE constructionsIGCSE locinets of solids IGCSEruler and compasses triangleIGCSE maths tutor

Related guides

Keep exploring this maths topic

IGCSE Maths18 Nov 2026

IGCSE Maths Geometry Topics (0580 E4): Terms, Constructions, Bearings, Similarity, Symmetry, Angles and Circle Theorems

A map of all eight Cambridge IGCSE 0580 geometry sub-topics, E4.1 to E4.8, with exactly what changes between Core and Extended, how geometry is tested on the non-calculator and calculator papers, how to write reasons that earn marks, and the order we teach the strand.

IGCSE geometry0580 geometry syllabusIGCSE circle theorems and anglesCore vs Extended geometry

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Maths Exam Equipment: What to Bring and the Rules for 0580

The equipment Cambridge IGCSE 0580 candidates need: compasses, protractor, ruler, a scientific calculator for Papers 3 and 4, the rules on tracing paper and banned calculators, drawing conventions, a worked construction and a checklist.

IGCSE maths exam equipment0580 calculator rulesIGCSE maths what to bringIGCSE exam rules

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Symmetry: Lines and Rotational Symmetry in 2D, Planes and Axes of Symmetry in 3D (0580 E4.5)

Line symmetry and order of rotational symmetry for triangles, quadrilaterals and polygons, then planes and axes of symmetry for prisms, cylinders, pyramids and cones, as set out in Cambridge IGCSE 0580 sub-topic 4.5. Reference tables, four original worked examples and a self-check.

IGCSE symmetryrotational symmetry orderplanes of symmetrysymmetry of quadrilaterals

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Volume and Surface Area: Cones, Spheres, Pyramids, Cylinders and Prisms (0580 E5.4)

Volume and surface area of the six solids in Cambridge IGCSE 0580 sub-topic 5.4, which formulas are on the List of formulas, how to find a slant height, why curved and total surface area differ, and how to work backwards from a volume. Four original worked examples and a self-check.

IGCSE volume and surface areavolume of a conesurface area of a spherepyramid volume IGCSE

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

3D Trigonometry for IGCSE Maths (0580 E6.6): Pythagoras in Solids and the Angle Between a Line and a Plane

How to find lengths and angles inside cuboids, wedges, pyramids and real-life 3D settings for Cambridge IGCSE 0580 Extended (E6.6), with a three-step method for the angle between a line and a plane, four worked examples and a self-check.

IGCSE 3D trigonometryangle between a line and a plane3D Pythagoras IGCSE0580 E6.6

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

Alternate Segment Theorem, Cyclic Quadrilaterals and Tangent and Chord Properties for IGCSE (0580 E4.7–E4.8)

The harder Extended circle properties in Cambridge IGCSE 0580: opposite angles of a cyclic quadrilateral, the alternate segment theorem, tangents from an external point, equal chords and the perpendicular bisector of a chord. How to spot each one, four original worked examples and a self-check.

alternate segment theoremcyclic quadrilateral IGCSEtangents from an external pointchord properties circle

By Maths Bodhi Team

Read guide