A number in standard form is written as A × 10ⁿ, where A is at least 1 and less than 10, and n is a positive or negative integer. So 52 000 is 5.2 × 10⁴ and 0.0037 is 3.7 × 10⁻³. In Cambridge IGCSE 0580 you must convert numbers into and out of this form and calculate with them, and the most common lost mark is an answer such as 30 × 10⁴ that is correct in value but not in standard form.
Standard form is E1.8 on the Extended syllabus and C1.8 on Core. It is short to learn, but the rules about which paper it appears on differ between the tiers, so check that first. If the topic keeps costing marks, tutoring for Cambridge IGCSE Mathematics can target it directly.
Core, Extended and the two kinds of paper
The content is the same at both tiers: use the form, convert into and out of it, and calculate with it. The difference is where the calculating is tested.
| Core | Extended | |
|---|---|---|
| Write and convert numbers | Paper 1 and Paper 3 | Paper 2 and Paper 4 |
| Calculate with standard form | Paper 3 only (calculator) | Paper 2 (by hand) and Paper 4 |
The syllabus states that Core candidates calculate with standard form only on Paper 3. Extended candidates have no such limit, so Paper 2 can ask you to multiply or divide in standard form without a calculator. Our Number strand map for 0580 shows the other places where the tiers differ.
Converting: the place-value method
Move the decimal point until exactly one non-zero digit is in front of it, and count the moves.
- 3 820 000 000: move 9 places left to get 3.82, so 3.82 × 10⁹.
- 0.000 040 7: move 5 places right to get 4.07, so 4.07 × 10⁻⁵.
Big numbers have positive powers and small numbers (between 0 and 1) have negative powers. To convert back, reverse the move: 6.1 × 10⁻³ = 0.0061.
A number like 52 × 10⁴ is not in standard form because 52 is not less than 10. Rewrite 52 as 5.2 × 10¹, then combine: 5.2 × 10⁵.
Worked example 1: multiplying and dividing by hand
Without a calculator, work out (a) (6 × 10⁷) × (5 × 10⁻³) and (b) (8.4 × 10³) ÷ (2.1 × 10⁻²). Give your answers in standard form.
Deal with the numbers and the powers of 10 separately, using the laws of indices for the powers.
(a) 6 × 5 = 30 and 10⁷ × 10⁻³ = 10⁴. That gives 30 × 10⁴. Adjust: 30 = 3 × 10¹, so the answer is 3 × 10⁵.
(b) 8.4 ÷ 2.1 = 4 and 10³ ÷ 10⁻² = 10⁵. The answer is 4 × 10⁵. Here A is already between 1 and 10, so no adjustment is needed.
Subtracting a negative index is where students slip: 3 − (−2) = 5.
Worked example 2: adding by hand
Without a calculator, work out 7.3 × 10⁵ + 4.9 × 10⁴. Give your answer in standard form.
You cannot add the A values directly, because the powers are different. Either write both as ordinary numbers or match the powers.
- Ordinary numbers: 730 000 + 49 000 = 779 000 = 7.79 × 10⁵.
- Matching powers: 4.9 × 10⁴ = 0.49 × 10⁵, so 7.3 + 0.49 = 7.79, giving 7.79 × 10⁵.
The ordinary-number method is safer when the powers are close. Matching powers is quicker when they are far apart and the numbers would have many zeros.
Worked example 3: a calculator question in context
A grain of sand has a mass of 6.7 × 10⁻⁷ kg. Estimate the number of grains in 2.5 kg of sand. Give your answer in standard form to 3 significant figures.
Number of grains = total mass ÷ mass of one grain = 2.5 ÷ (6.7 × 10⁻⁷).
Enter it with the calculator's ×10ˣ key (sometimes labelled EXP), not by typing "× 10 ^". Using the key keeps the number together, so you do not need extra brackets.
The display shows 3 731 343.28…, or 3.731343284 × 10⁶ in scientific mode.
Answer: 3.73 × 10⁶ grains (3 s.f.).
Worked example 4: comparing and ordering
Write these in order of size, smallest first: 2.6 × 10⁻⁴, 0.000 31, 1.9 × 10⁻³, 28 × 10⁻⁵.
Convert each to standard form first:
- 2.6 × 10⁻⁴
- 0.000 31 = 3.1 × 10⁻⁴
- 1.9 × 10⁻³
- 28 × 10⁻⁵ = 2.8 × 10⁻⁴
Compare the powers first: 10⁻³ is larger than 10⁻⁴. Among the 10⁻⁴ numbers, compare A: 2.6 < 2.8 < 3.1.
Order: 2.6 × 10⁻⁴, 28 × 10⁻⁵, 0.000 31, 1.9 × 10⁻³. Write the final list in the forms given in the question.
Reading the calculator display
Calculators show large and small answers in different ways, and the display is not itself an answer. A result such as 3.731343284⁰⁶ or 3.731343284E6 means 3.731343284 × 10⁶. Write it with "× 10" in full; copying the display as it appears can lose the mark.
On Papers 3 and 4, round A to 3 significant figures unless the question says otherwise, which is the standard Cambridge rule for non-exact answers. Rounding is covered more fully in rounding to 3 significant figures.
Mistakes our tutors see
- Leaving A outside the range: 30 × 10⁴ or 0.4 × 10⁶.
- Wrong sign of the power for small numbers, writing 0.0037 as 3.7 × 10³.
- Adding the A values when the powers differ.
- Multiplying the powers instead of adding: 10⁷ × 10⁻³ written as 10⁻²¹.
- Typing 2.5 ÷ 6.7 × 10⁻⁷ without brackets when not using the ×10ˣ key, so the calculator divides by 6.7 and then multiplies by 10⁻⁷.
- Copying the display without writing × 10.
When to get help
Standard form problems are usually index problems or place-value problems underneath. These are the signs to look for:
- The student can convert large numbers but not small ones, or the reverse.
- Paper 2 standard form questions are skipped because "it needs a calculator".
- Answers are right in value but lose the mark for form, test after test.
- Science homework with standard form (physics and chemistry use it constantly) is slow and error-prone.
A tutor will often go back to the laws of indices first, because once 10ᵐ × 10ⁿ = 10ᵐ⁺ⁿ is secure, the rest follows.
Self-check
- Write 0.000 506 in standard form.
- Work out (4.5 × 10⁻³) × (2 × 10⁶) without a calculator.
- Work out (9 × 10⁸) ÷ (3 × 10⁻⁴) without a calculator.
- Work out 6.2 × 10⁴ − 5.8 × 10³ without a calculator. Give your answer in standard form.
- Light travels at about 3 × 10⁸ m/s. The Sun is about 1.5 × 10¹¹ m from Earth. How many seconds does sunlight take to reach Earth?
Answers.
- 5.06 × 10⁻⁴.
- 4.5 × 2 = 9 and 10⁻³ × 10⁶ = 10³, so 9 × 10³.
- 9 ÷ 3 = 3 and 10⁸ ÷ 10⁻⁴ = 10¹², so 3 × 10¹².
- 62 000 − 5800 = 56 200 = 5.62 × 10⁴.
- (1.5 × 10¹¹) ÷ (3 × 10⁸) = 0.5 × 10³ = 500 seconds (8 minutes 20 seconds).
Where it leads
Standard form calculations rely on the laws of indices, and comparing sizes uses the same place-value thinking as decimal place value by hand. A quick way to check a standard form answer is estimating with rounded values: 2.5 ÷ (6.7 × 10⁻⁷) is roughly 3 ÷ (7 × 10⁻⁷), which is a little over 4 × 10⁶, so 3.73 × 10⁶ is sensible. Standard form is used throughout IGCSE sciences, and in A level and IB courses it appears in physics and statistics as a matter of routine. For exam-style revision, try the mixed calculator-paper Number questions.
How Maths Bodhi helps
In the free demo class, the tutor sets two standard form questions by hand and one on the calculator, and checks both the value and the form of each answer. That separates students who misunderstand the idea from those who only need to finish their answers properly. See our IGCSE maths subject page for how sessions are planned across the course.
Home tuition is available in Gurgaon (Gurugram). Students elsewhere in India and abroad learn with us online. You can book a free demo class.
Written and checked by the Maths Bodhi team. Facts checked against official Cambridge International and Pearson sources, November 2026.
Frequently asked questions
- What is standard form in IGCSE maths?
- Standard form writes a number as A × 10ⁿ, where 1 ≤ A < 10 and n is an integer. For example, 52 000 = 5.2 × 10⁴ and 0.0037 = 3.7 × 10⁻³.
- Is standard form on the IGCSE non-calculator paper?
- For Extended, yes: Paper 2 can ask you to calculate with standard form by hand. The syllabus says Core candidates calculate with standard form only on Paper 3, the calculator paper.
- How do you multiply numbers in standard form?
- Multiply the A values, add the powers of 10, and then adjust so that the number in front is between 1 and 10.
- How do you add numbers in standard form without a calculator?
- Write both as ordinary numbers, or rewrite one so both have the same power of 10, then add and convert the result back to standard form.
- Why did I lose a mark for 30 × 10⁴?
- The value is right but it is not standard form, because 30 is not less than 10. The correct answer is 3 × 10⁵.
- How do I enter standard form on a calculator?
- Use the ×10ˣ or EXP key, so 6.7 × 10⁻⁷ is entered as one number. If you type × 10 ^ instead, put brackets round the whole number.
