An IGCSE estimation question asks you to round every number to 1 significant figure, work out the simpler calculation by hand, and give that as your estimate. You must show the rounded numbers, because that line is where the method mark is. Working out the exact answer and rounding it at the end is not an estimate and usually scores nothing.
Estimation is E1.9 in Cambridge 0580, and the content is the same for Core and Extended. It has three parts: rounding to a given accuracy, estimating calculations, and rounding an answer sensibly for its context. All three appear on the non-calculator papers, and the first one appears on every calculator answer you write. A tutor for Cambridge IGCSE 0580 will usually test it within the first session, because it affects marks everywhere.
What E1.9 covers
- Rounding to a given number of decimal places or significant figures, or to the nearest 10, 100, 1000 and so on.
- Estimating calculations involving numbers, quantities and measurements, usually by rounding to 1 significant figure.
- Rounding answers to a reasonable accuracy for the situation, such as whole people, whole tins or money to the nearest cent.
Core and Extended share this content word for word. Its neighbours in the strand are listed in the 0580 Number topics guide.
Significant figures in one minute
The first significant figure is the first non-zero digit, reading from the left. After that, every digit counts, including zeros.
- In 0.004 086 2 the first significant figure is 4.
- In 72 549 it is 7.
- In 3.0 the zero is significant: 3.0 is given to 2 s.f.
When you round a whole number, keep the place value with zeros. 72 549 to 2 s.f. is 73 000, not 73.
Worked example 1: rounding
Write (a) 0.004 086 2 correct to 3 significant figures, (b) 72 549 correct to 2 significant figures, (c) 6.9952 correct to 2 decimal places.
(a) The first three significant figures are 4, 0 and 8. The next digit is 6, so round up: 0.004 09.
(b) The first two are 7 and 2. The next digit is 5, so round up: 73 000.
(c) Two decimal places means looking at the third: 6.99|52. The 5 rounds the 9 up, which carries: 7.00. Writing 7 or 7.0 loses the accuracy, because the question asked for 2 decimal places.
Worked example 2: a standard estimate
By rounding each number to 1 significant figure, estimate the value of (48.7 × 0.312) ÷ 5.86.
Round each number:
- 48.7 → 50
- 0.312 → 0.3
- 5.86 → 6
Estimate = (50 × 0.3) ÷ 6 = 15 ÷ 6 = 2.5.
The exact value is about 2.59, so the estimate is close. In the exam you only write the rounded line and the result. Both are needed: "2.5" on its own may get no marks.
Worked example 3: a square root and a small decimal
Estimate √(0.0483 × 19.6). Show your working.
Round to 1 significant figure: 0.0483 → 0.05 and 19.6 → 20.
0.05 × 20 = 1, and √1 = 1.
The exact value is about 0.973. Notice that rounding to 1 s.f. was chosen to make the product a perfect square. Sometimes the examiner chooses numbers so this happens; when it does not, round to a nearby square. For example, √(63.8 × 1.97) is about √(60 × 2) = √120, and √121 = 11, so the estimate is about 11.
Worked example 4: estimates in context
(a) A school buys 389 tickets at $21.75 each. Estimate the total cost. Is your estimate larger or smaller than the actual cost? (b) 247 students go on a trip. Each bus holds 52 students. How many buses are needed?
(a) 389 → 400 and 21.75 → 20, so the estimate is 400 × 20 = $8000.
One number was rounded up and the other down, so you cannot tell from the rounding alone whether the estimate is too large or too small. The actual cost is 389 × 21.75 = $8460.75, so here the estimate is smaller. If both numbers had been rounded up, you could say for certain that the estimate was larger.
(b) 247 ÷ 52 = 4.75. You cannot hire 0.75 of a bus, and 4 buses would leave students behind, so the answer is 5 buses. This is the "reasonable degree of accuracy" part of E1.9: the context decides whether to round up, down or to the nearest value.
Estimation on each paper
Papers 1 and 2 (non-calculator). The classic "estimate by rounding to 1 significant figure" question lives here. Examiners like dividing by a small decimal, such as 612 ÷ 0.0489 ≈ 600 ÷ 0.05 = 12 000, so practise dividing by 0.05, 0.2 and 0.4 quickly. Multiply top and bottom by 100 or 10 to clear the decimal.
Papers 3 and 4 (calculator). Even when a question does not ask for an estimate, make one in your head. A rough mental check catches the most expensive calculator errors: a missing bracket or a slipped power of 10 usually gives an answer that is wildly out. Rounding is examined on every answer: Cambridge expects 3 significant figures for non-exact answers unless the question says otherwise, and angles to 1 decimal place.
Mistakes our tutors see
- Calculating exactly first, then rounding the answer and calling it an estimate.
- Rounding 0.0489 to 0.04 or to 0. To 1 s.f. it is 0.05.
- Dropping the zeros: 72 549 to 2 s.f. written as 73.
- Rounding to 1 decimal place when the question says 1 significant figure.
- Rounding in stages: 3.46 → 3.5 → 4. To 1 s.f., 3.46 is 3.
- Ignoring the context, for example 4.75 buses or 5.27 tins of paint.
When to get help
Estimation looks easy, so weaknesses often go unnoticed until a mock paper. Signs that a student needs support:
- Estimates are given without the rounded numbers written down.
- Significant figures and decimal places are mixed up, especially with small decimals.
- Dividing by a decimal such as 0.05 is avoided or done wrongly.
- Calculator answers are never checked for size, so a 10-times error goes unseen.
- The student cannot say whether an estimate is too big or too small.
These points are quick to teach, and fixing them protects marks across the whole paper, not just in this topic.
Self-check
- Write 0.070 96 correct to 2 significant figures.
- Write 395.6 correct to 1 significant figure.
- By rounding each number to 1 significant figure, estimate (61.8 × 3.9) ÷ 0.198.
- Estimate 9.87² ÷ 2.03.
- One tin of paint covers 11 m². How many tins are needed for 58 m² of wall?
Answers.
- 0.071.
- 400.
- (60 × 4) ÷ 0.2 = 240 ÷ 0.2 = 1200.
- 10² ÷ 2 = 50.
- 58 ÷ 11 = 5.27…, so 6 tins. Five tins would not cover the wall.
Where it leads
Rounding leads directly into limits of accuracy and bounds, where you work backwards from a rounded value to the range it came from. Estimating is the simplest check for standard form by hand and on a calculator, and it depends on non-calculator fraction skills such as dividing by a decimal. For timed practice of this and other quick methods, see speed skills for the non-calculator papers. Sensible rounding and order-of-magnitude checks carry on into A level and IB, where an answer that is the wrong size is the first thing to catch.
How Maths Bodhi helps
The free demo includes a short rounding and estimation check done with the calculator out of reach. It shows in a few minutes whether the gap is significant figures, decimal division or exam habits such as not writing the rounded line. Students outside Gurgaon can learn IGCSE maths online with us with the same approach.
Home tuition is available in Gurgaon (Gurugram). Students elsewhere in India and abroad learn with us online. You can book a free demo class.
Written and checked by the Maths Bodhi team. Facts checked against official Cambridge International and Pearson sources, November 2026.
Frequently asked questions
- How do you answer IGCSE estimation questions?
- Round every number to 1 significant figure, write the rounded calculation down, work it out by hand and give that value as your estimate.
- Do I get marks for the exact answer in an estimation question?
- Usually not. The marks are for showing the rounded values and the estimate that comes from them, not for the exact calculator value.
- What is the difference between significant figures and decimal places?
- Decimal places count digits after the decimal point. Significant figures count from the first non-zero digit, wherever it is.
- How many significant figures should IGCSE answers have?
- Cambridge 0580 expects non-exact answers to 3 significant figures, and angles in degrees to 1 decimal place, unless the question says otherwise.
- Is estimation on the IGCSE calculator paper?
- Estimation questions are most natural on the non-calculator Papers 1 and 2, but rounding is tested on every calculator answer, and estimating is a useful check on Papers 3 and 4.
- Is estimation different for Core and Extended?
- No. E1.9 Estimation has the same content for both tiers in the 0580 syllabus.
