To find a volume of revolution in AA HL, square the distance from the axis to the curve, multiply by π and integrate along the axis of rotation: V = ∫ πy² dx about the x-axis, or V = ∫ πx² dy about the y-axis. Every question in the course comes back to those two formulas. What makes it hard is setting them up: which variable to integrate in, which limits to use, and what to do when the region sits between two curves.
Our AA HL integration techniques guide introduces volumes with one example about each axis. This post goes further, with a decision routine, regions between curves, a region that has to be split, and ways to check a calculator answer. For one-to-one support with HL calculus, see our IB maths AA HL tutor service.
Where volumes sit in the course
Volumes of revolution about the x-axis or the y-axis are part of the AA HL calculus content in the current course (first assessment 2021, final assessment November 2028). AA SL stops at areas, which our sibling guide on definite integrals and area in AA SL covers. HL also adds area between a curve and the y-axis, which uses the same "integrate in y" idea as rotation about the y-axis.
Volumes can appear on any AA HL paper:
- Paper 1 (120 minutes, no calculator): integrands chosen so that the integral is exact, often giving answers like π² or 56π/15.
- Paper 2 (120 minutes, GDC required): awkward intersections and integrals done numerically.
- Paper 3 (60 minutes, GDC required): a volume may be one part of a longer investigation.
The formula booklet gives the two disc formulas. The cylindrical shell method, which many US calculus courses teach, is not needed: every IB volume question can be set up with discs.
A routine for setting up any volume
- Sketch the region and shade it. Mark every intersection point.
- Identify the axis of rotation. About the x-axis, slices are vertical and you integrate in x. About the y-axis, slices are horizontal and you integrate in y.
- Write the radius in the right variable. About the y-axis, the radius is x, so rewrite the curve as x = g(y).
- Choose limits on the axis of rotation. About the y-axis, the limits are y-values, not x-values.
- One curve or two? If the region touches the axis, use πr². If there is a gap between the region and the axis, use π(R² − r²), outer radius squared minus inner radius squared.
- Check whether the boundary changes part-way. If the outer edge switches from one curve to another, split the integral there.
Worked example 1: about the x-axis, exact answer
The region bounded by y = 2/√(1 + x²), the x-axis, the y-axis and the line x = 1 is rotated through 2π about the x-axis. Find the exact volume.
y² = 4/(1 + x²), so
V = π ∫ from 0 to 1 of 4/(1 + x²) dx = 4π [arctan x] from 0 to 1 = 4π(π/4 − 0) = π² (about 9.87 cubic units).
Squaring first turned an awkward-looking curve into a standard arctan integral. This happens often in Paper 1, so always square before deciding the integral is hard. Our sibling post on compound angles and inverse trig explains why arctan 1 = π/4 and not 5π/4.
Worked example 2: about the y-axis, rewriting the curve
The region bounded by y = ln x, the y-axis, the x-axis and the line y = 2 is rotated through 2π about the y-axis. Find the volume.
Axis and variable. About the y-axis, so integrate in y. The radius is x, and y = ln x gives x = e^y.
Limits. The region runs from y = 0 to y = 2.
V = π ∫ from 0 to 2 of (e^y)² dy = π ∫ from 0 to 2 of e^(2y) dy = (π/2)[e^(2y)] from 0 to 2
V = (π/2)(e⁴ − 1), about 84.2 cubic units.
A common wrong start is π ∫ (ln x)² dx with x-limits. That integrates in the wrong direction and describes a different solid.
Worked example 3: the region between two curves
R is the region enclosed by y = 3x − x² and y = x. Find the volume when R is rotated through 2π about the x-axis.
Intersections. 3x − x² = x gives x² − 2x = 0, so x = 0 or x = 2.
Outer and inner radius. For 0 < x < 2, the parabola is above the line, and both are above the axis. So R = 3x − x² and r = x.
V = π ∫ from 0 to 2 of [(3x − x²)² − x²] dx = π ∫ from 0 to 2 of (8x² − 6x³ + x⁴) dx
= π [8x³/3 − 3x⁴/2 + x⁵/5] from 0 to 2 = π(64/3 − 24 + 32/5) = 56π/15 (about 11.7 cubic units).
The trap. Rotating the difference, π ∫ (3x − x² − x)² dx, gives 16π/15. That is the volume of a different solid, the one made by rotating a region of height (2x − x²) that touches the axis. The washer method needs R² − r², not (R − r)².
Worked example 4: a Paper 2 region that must be split
R is the region enclosed by y = 2 cos x and y = x². (a) Find the volume when R is rotated through 2π about the x-axis. (b) Find the volume when R is rotated through 2π about the y-axis.
Intersections (GDC). 2 cos x = x² at x = ±a, where a ≈ 1.0217. Store a in the calculator; do not retype a rounded value.
(a) About the x-axis. The outer radius is 2 cos x, the inner is x².
V = π ∫ from −a to a of (4cos²x − x⁴) dx ≈ 17.0 cubic units (GDC).
(b) About the y-axis. The region is symmetric in the y-axis, so rotating the right half gives the same solid as rotating the whole region. Use only x ≥ 0.
Look at the right half in horizontal slices. For 0 ≤ y ≤ a² (about 1.04), the slice runs from the y-axis to the parabola, so the radius is x = √y. For a² ≤ y ≤ 2, the slice runs to the cosine curve, so the radius is x = arccos(y/2). The boundary changes at y = a², so split there:
V = π ∫ from 0 to a² of y dy + π ∫ from a² to 2 of (arccos(y/2))² dy ≈ 1.71 + 1.52 = 3.23 cubic units.
Doubling this, or integrating from −a to a, is the classic error. A rotated half already sweeps the full solid.
Checking a volume on the GDC
- Bounding cylinder. In example 4(a), every point of R is within 2 units of the x-axis and lies between x = −a and x = a, so the volume must be less than π × 2² × 2a ≈ 25.7. An answer of 17.0 passes; an answer of 54 would not.
- Rough shape. Compare with a simpler solid. In example 1, the radius falls from 2 to √2, so the volume should lie between a cylinder of radius √2 (2π ≈ 6.28) and one of radius 2 (4π ≈ 12.6). π² ≈ 9.87 fits.
- Exact against numeric. In Paper 2 you can evaluate an exact answer from Paper 1 practice numerically to confirm it.
- Radians. Trig integrands need radians, or the integral is wrong without warning.
Our guide to the calculator menus for integration and intersections shows where these functions are.
Mistakes that cost marks
- Forgetting π, or forgetting to square the radius.
- x-limits for a y-axis rotation. Limits must be on the axis you rotate about.
- (R − r)² instead of R² − r² for regions between curves.
- Not splitting when the outer boundary changes curve.
- Doubling a symmetric region rotated about its own line of symmetry.
- Rounding intersections early. Store them and use the stored values in the limits.
Self-check
- The region under y = √x for 0 ≤ x ≤ 4 is rotated about the x-axis. Find the volume.
- The region between y = x², the y-axis and the line y = 9 (for x ≥ 0) is rotated about the y-axis. Find the volume.
- The region enclosed by y = x² + 1 and y = 2 is rotated about the x-axis. Find the volume.
- The region under y = e^x for 0 ≤ x ≤ ln 2 is rotated about the x-axis. Find the exact volume.
Answers. 1: π ∫ x dx from 0 to 4 = 8π. 2: π ∫ y dy from 0 to 9 = 81π/2. 3: π ∫ from −1 to 1 of [4 − (x² + 1)²] dx = 64π/15 (about 13.4). 4: (π/2)(4 − 1) = 3π/2.
Where this leads next
Volumes combine integration methods, inverse functions and careful sketching, which is why they suit the longer HL questions. Our guide to preparing for HL Paper 3 shows how a question can grow from a region into a volume and then a limit. The AA HL topics guide places volumes within the whole HL calculus topic. Students who want to take calculus further can work with a specialist calculus tutor.
How Maths Bodhi helps
Our tutors start every volume question with a sketch, and in the free demo we ask the student to talk through the six-step routine above on a fresh region. Practice then mixes Paper 1 exact questions with Paper 2 GDC questions, with written method checked each week. Families in Gurgaon can arrange an IB maths home tutor in Gurugram through us.
Home tuition is available in Gurgaon (Gurugram). Students elsewhere in India and abroad learn with us online. You can book a free demo class.
Written and checked by the Maths Bodhi team. Facts checked against official IB sources, November 2026.
Frequently asked questions
- Are volumes of revolution in IB maths AA SL?
- No. In the current AA course, volumes of revolution about the x-axis or y-axis are HL content; AA SL covers areas but not volumes.
- What is the formula for volume of revolution about the y-axis in IB maths?
- V = ∫ πx² dy, with limits that are y-values, so you first rewrite the curve as x in terms of y.
- How do you find the volume between two curves rotated about the x-axis?
- Use V = π ∫ (R² − r²) dx, where R is the outer curve and r the inner curve, with limits at their intersections.
- Do I need the shell method for IB maths AA HL?
- No. The formula booklet gives the disc formulas about each axis, and IB volume questions can be set up with discs and washers.
- Why is my volume of revolution answer twice the correct value?
- You probably rotated a region that is symmetric about the axis of rotation and then doubled it; the right half alone already sweeps the whole solid.
- Can I use the GDC for volumes of revolution in IB maths?
- Yes in Papers 2 and 3, where you can integrate numerically, but Paper 1 is calculator-free, so you must integrate by hand there.
