Most GDC marks in 0607 come from four buttons' worth of skill: draw the graph, find where it crosses the x-axis, find its turning points and find where two graphs meet. The syllabus lists these under Sketching graphs on a calculator, C3.2 for Core and E3.2 for Extended, and both tiers learn the same list. It adds that questions can use "unfamiliar functions not mentioned explicitly in this syllabus". So you cannot memorise your way through. You need a routine that works on any graph.
This guide gives that routine, then four worked examples. Students who want a tutor to drill this on their own calculator model can work with our IGCSE International Maths 0607 tutors.
What the syllabus asks you to do on the GDC
Under C3.2 and E3.2, students use the GDC to:
- sketch the graph of a function
- produce a table of values
- plot points (made explicit in the 2025 syllabus)
- find zeros, local maxima or local minima
- find the intersection of the graphs of functions
- find the vertex of a quadratic.
Equations and inequalities link in too. The Equations topic asks students to use a GDC to solve equations, including unfamiliar ones, and the Extended Inequalities topic includes solving inequalities with a GDC. How these skills fit the rest of the course is set out in our 0607 syllabus guide.
Calculator paper or not?
E3.2 is one of the outcomes tested on calculator papers only, and the same goes for C3.2 at Core. Paper 1 and Paper 2 can still ask about the same functions, but you will need algebra: factorising, the quadratic formula or completing the square. A sensible habit is to solve by hand first in practice, then confirm on the GDC. On Paper 3 or 4, do the reverse. Get the answer from the GDC quickly, then write enough to show where it came from.
The routine for any graph question
- Enter the function exactly. Use brackets for fractions and powers: 3/(x − 2), not 3/x − 2.
- Set the window from the question. If it says −3 ≤ x ≤ 4, use that domain. If no domain is given, start with a standard window and zoom out until you see the whole shape: every crossing and every turn.
- Use the analysis menu, not trace. Most GDCs have a menu for zero (or root), maximum, minimum and intersection. On TI-84 models it is the CALC menu. On Casio fx-CG models it is G-Solv. On TI-Nspire models it is Analyze Graph. Trace only gives approximate points.
- Store or write full values. Give answers to 3 significant figures, or 1 decimal place for angles, unless told otherwise. Keep full values for later parts.
- Copy a sketch carefully. Cambridge's conventions say a sketch must show the key features, such as intercepts and turning points, with values marked. It needs labelled axes, the right quadrants and the correct long-term behaviour.
Worked example 1: zeros and vertex of a quadratic
Sketch y = x² − 3x − 5 for −3 ≤ x ≤ 6. Find the zeros and the vertex.
Enter Y1 = x² − 3x − 5 and set x from −3 to 6. The graph is a U-shaped parabola.
- Zeros: use the zero tool twice, once for each crossing. The GDC gives x = −1.19258… and x = 4.19258…, so x = −1.19 and x = 4.19 (3 s.f.).
- Vertex: use the minimum tool. It gives (1.5, −7.25).
Check by hand: the quadratic formula gives x = (3 ± √29)/2, which matches. The vertex is at x = 3/2 because the zeros are symmetric about it. On Paper 2 you would give the exact form (3 ± √29)/2.
Worked example 2: where an exponential meets a line
Find the x-coordinates of the points where y = 2ˣ meets y = x + 3.
There is no algebraic method at IGCSE for 2ˣ = x + 3, so this is exactly the "unfamiliar" type the syllabus mentions.
Enter Y1 = 2^x and Y2 = x + 3. The standard window shows a crossing to the right of the y-axis. Zoom out and you will also find a crossing on the left, where the exponential graph is close to the x-axis. Most students miss this one.
Use the intersection tool at each crossing:
- x = −2.86 (3 s.f.)
- x = 2.44 (3 s.f.)
Say how you found them. A line such as "Using the GDC, the graphs intersect at x = −2.86 and x = 2.44" makes the method clear.
Worked example 3: turning points of a cubic
f(x) = x³ − 4x + 1. Find the local maximum and local minimum points and the three zeros.
Enter the function with a window of about −3 ≤ x ≤ 3 and −6 ≤ y ≤ 8.
- Local maximum: (−1.15, 4.08)
- Local minimum: (1.15, −2.08)
- Zeros: x = −2.11, x = 0.254 and x = 1.86
Note 0.254 to 3 s.f., not 0.25. Leading zeros do not count as significant figures. The turning points are symmetric about (0, 1) because x³ − 4x is an odd function shifted up by 1. Spotting symmetry like this is a quick check that you have not misread a value.
Worked example 4: solving an inequality graphically
Solve x − 2 > 3/x for x > 0.
Graph Y1 = x − 2 and Y2 = 3/x for x > 0. The intersection tool gives x = 3. To the right of 3 the line is above the curve, so:
x > 3
Algebra check: for x > 0, multiply both sides by x without reversing the sign: x² − 2x > 3, so (x − 3)(x + 1) > 0. With x > 0, that means x > 3. The condition x > 0 matters. For negative x, multiplying by x reverses the inequality, which is why the question limits the domain.
Mistakes our tutors see
- Missing a second intersection because the window was too small. Always zoom out once before trusting the answer.
- Using trace instead of the zero or intersect tool, which gives values that are slightly off and lose the accuracy mark.
- Rounding too early. A zero rounded to 4.19 and then used in a later part can push the final answer out.
- Calculator in radian mode for a trigonometric graph. 0607 trigonometry is in degrees.
- A sketch with no values marked. A correct shape with no intercepts or turning points labelled rarely gets full credit.
- Bracket errors, such as 1/x+2 entered when 1/(x + 2) was meant.
When to get help
- The student can draw graphs but freezes when a question gives a function they have never seen.
- Answers are often close but not accurate to 3 s.f., which usually points to trace or early rounding.
- The student cannot explain in words what a zero or an intersection means in the context of the question.
- Non-calculator Paper 2 marks are falling because the student now reaches for the GDC first.
A tutor who uses the same calculator model can fix button habits in a session or two. The deeper fix is linking each GDC output to the algebra behind it.
Self-check
- Find the zeros of y = x² + x − 7.
- Find where y = 3 − x² meets y = 0.5x.
- Find the local minimum point of y = x + 4/x for x > 0.
- Find the vertex of y = 2x² − 8x + 3.
- Use your GDC to solve 2ˣ = 5.
Answers. 1: x = 2.19 and x = −3.19 (exact: (−1 ± √29)/2). 2: (1.5, 0.75) and (−2, −1). 3: (2, 4). 4: (2, −5). 5: x = 2.32.
Where it leads
The same skills carry straight into IB Mathematics: Applications and Interpretation, where a GDC is used on every paper. Our IB GDC skills guide shows how the expectations grow. Within 0607, the next tools to learn are the table function, covered in our guide to using GDC tables for sequences, and data lists, covered in GDC regression and summary statistics.
How Maths Bodhi helps
In the free demo, the tutor watches the student solve one GDC question and one matching algebra question. That shows whether the gap is buttons, accuracy or understanding. Our tutors know the main GDC families and practise on the student's own model. Gurgaon families can also ask about IB and IGCSE maths home tutors in Gurgaon.
Home tuition is available in Gurgaon (Gurugram). Students elsewhere in India and abroad learn with us online. You can book a free demo class.
Written and checked by the Maths Bodhi team. Facts checked against official Cambridge International and Pearson sources, November 2026.
Frequently asked questions
- What calculator skills do I need for IGCSE 0607?
- Sketching a graph, producing a table of values, plotting points, finding zeros and local maxima or minima, finding intersections, finding the vertex of a quadratic, finding mean, median and quartiles and, at Extended, finding a linear regression equation.
- How do I find the zeros of a function on a graphic calculator?
- Graph the function in a window that shows every crossing, then use the zero or root tool in the analysis menu once for each crossing, and give each value to 3 significant figures.
- Can I use my GDC on 0607 Paper 2?
- No. Papers 1 and 2 are non-calculator, so graph questions there need algebra such as factorising or the quadratic formula.
- Is a CAS calculator allowed for 0607?
- No. The syllabus says calculators with symbolic algebraic logic are not permitted.
- How do I show working when I use the GDC?
- Write the functions you graphed and the feature you found, for example "the graphs of y = 2ˣ and y = x + 3 intersect at x = 2.44", and sketch the graph if the question asks for it.
- Why does my GDC give only one intersection?
- The window is probably too small. Zoom out or change the x and y ranges until you can see the whole shape, then look for every crossing.
