WhatsApp us
IGCSE Maths18 Nov 2026

IGCSE Additional Maths Paper 2 (0606): Using Your Calculator Well on the Calculator Paper

0606 Paper 2 is the calculator paper: 2 hours, 80 marks, 50% of the grade, scientific calculator required. How to set the calculator, keep accuracy to 3 significant figures and 1 decimal place, when answers without working are accepted, an annotated radians example, a four-week plan and a checklist.

IGCSE Additional Maths Paper 2 (0606): Using Your Calculator Well on the Calculator Paper

Cambridge 0606 Paper 2 lasts 2 hours, carries 80 marks and is worth half the qualification. A scientific calculator is required. It can test any topic in the syllabus, and the calculator lets the questions use awkward numbers, e and ln values, and angles that are not "nice". The calculator does not do the maths for you, though. Most marks still go to the method you write down, and a good share of lost marks on this paper come from the calculator itself: the wrong angle mode, or rounding too early.

For one-to-one preparation on both components, see our tutors for IGCSE Additional Mathematics.

Paper 2 at a glance

From the Cambridge 0606 syllabus for 2025–2027:

  • 2 hours, 80 marks, 50% of the total.
  • A scientific calculator is required. The syllabus refers to the Cambridge Handbook for the rules on calculator use, so check with your school's exams officer that your model is allowed.
  • Structured and unstructured questions, all compulsory, from any part of the content.
  • The List of formulas on page 2 is the same as on Paper 1, with nothing given for calculus.
  • Grades A* to E, with no F or G. Below the E threshold the result is unclassified.

Paper 1 is the non-calculator half. Its different demands are set out in our guide to the 0606 non-calculator paper.

The accuracy rules you are marked against

Cambridge's mathematical conventions for 0606 say that, unless the question states otherwise, angles in degrees should be given to at least one decimal place and all other non-exact values to at least three significant figures. To get there, you usually need more accuracy in the working.

Two other rules from the same section are worth knowing:

  • An answer that is exact to four or five significant figures should not be rounded unless the question says so.
  • If a question asks you to show a result to a given accuracy, give your working and the final value to at least one more figure than asked.

Set up the calculator before you start

  1. Angle mode. Trigonometric equations may be in degrees or radians, and calculus with trigonometric functions is always in radians. Read each question for the unit and switch deliberately.
  2. Stored values. Learn to store an answer in a memory (A, B, C or Ans) and reuse it. That is how you avoid early rounding.
  3. ln and log. Know which key is ln (base e) and which is lg (base 10), and how your model enters a logarithm to another base.
  4. Fractions and powers. Check how your calculator handles e^(−0.2t) or (2.5)^(1/3), with brackets in the right places.

If your school uses a particular Casio model, our IGCSE calculator guide walks through the keys.

An annotated Paper 2-style question

The question is original, and the notes on marks are our own description of typical practice, not text from a Cambridge mark scheme.

Solve 3 sin 2x = 2 for 0 ≤ x ≤ π, where x is in radians. Give your answers to 3 significant figures.

Step 1. Make the trigonometric function the subject. sin 2x = 2/3.

Step 2. Change the interval. If 0 ≤ x ≤ π, then 0 ≤ 2x ≤ 2π. Write this down: it tells you how many solutions to look for.

Step 3. Find the principal value in radians. 2x = sin⁻¹(2/3) = 0.72972... Keep it stored.

Step 4. Find the second value. Sine is also positive in the second quadrant: 2x = π − 0.72972... = 2.41187...

Step 5. Divide by 2. x = 0.36486... and 1.20593..., so x = 0.365 and x = 1.21.

Notes on where marks go: one for a correct first value of 2x, one for the method that gives the second value (π minus the first), and accuracy marks for both final answers. A student in degree mode gets 2x = 41.8° and loses everything after Step 2. A student who forgets to change the interval often gives only one answer and loses the last mark.

For more of these, including sec, cosec and cot, use our set of 0606 trigonometry questions with answers. Radian measure itself, including arcs and sectors, is in our circular measure guide.

Rounding too early: a short demonstration

A population is modelled by N = 400e^(0.15t). Find t when N = 1000.

e^(0.15t) = 2.5, so 0.15t = ln 2.5 and t = ln 2.5 ÷ 0.15.

  • Keeping full accuracy: t = 0.916290... ÷ 0.15 = 6.11 (3 s.f.).
  • Rounding ln 2.5 to 0.92 first: t = 0.92 ÷ 0.15 = 6.13, which is wrong to 3 significant figures.

The method is identical; only the rounding differs, and it costs the accuracy mark. Store the full value of ln 2.5 and divide that.

Where the calculator helps, and where it doesn't

The syllabus note for solving quadratic equations says that on the calculator paper, correct answers are acceptable without working. That is a narrow exception. Elsewhere, Cambridge's rules say candidates must show all necessary working, and "show that" questions need full justification.

So use the calculator for:

  • evaluating logs, exponentials and trigonometric values
  • checking a quadratic's roots, or solving one when it is only a step on the way
  • evaluating a definite integral you have already integrated by hand, as a check
  • arithmetic in vectors, sectors and the sine and cosine rules

But write by hand:

  • every derivative and integral
  • the equation you are solving and the interval you are working in
  • every substitution in a "show that" question

A four-week Paper 2 plan (our advice)

This assumes Paper 1 preparation runs alongside. Adjust it to your timetable.

  • Week 1: calculator fluency. Ten trig equations in degrees and ten in radians. Practise switching modes on purpose. Store and reuse values in every calculation.
  • Week 2: the "awkward number" topics. Logarithmic and exponential models, sector and segment areas, the sine and cosine rules inside circular measure questions, and vectors with non-integer components.
  • Week 3: calculus with e, ln and trig. Tangents and normals at decimal points, connected rates of change, kinematics with exponential velocity, definite integrals evaluated to 3 s.f.
  • Week 4: full papers. Two timed Paper 2s from the 2025 syllabus onwards, marked with the official mark schemes. Record every lost mark as method, accuracy or mode.

The last step is the useful one. If most lost marks are accuracy or mode errors, the fix takes days, not weeks.

Checklist for Paper 2

☐ My calculator is allowed, has a fresh battery, and I know how to reset it.

☐ I check the angle unit in every trigonometry question before I press a key.

☐ I store intermediate values and only round the final answer.

☐ I give angles in degrees to 1 decimal place and other values to 3 significant figures unless told otherwise.

☐ I don't round answers that are exact to four or five figures.

☐ I write every derivative, integral and equation by hand, even when the calculator could find the number.

☐ I use the calculator to check an answer when there is time left.

☐ I have done at least two timed Paper 2s in the post-2025 format.

Where Paper 2 fits

The two papers add to 160 marks, and Cambridge sets the grade thresholds on that total after each series. Our page on how 0606 grade boundaries are set shows the June 2026 figures and how to read them. For a wider view of the course, see our honest look at whether 0606 is worth it.

How Maths Bodhi helps

Our free demo includes two short calculator questions, one in degrees and one in radians, so the tutor sees how the student handles mode, storage and rounding as well as the maths. The tutor is matched to 0606, and progress is tracked on timed, exam-style Paper 2 questions. Students outside Gurgaon can take IGCSE maths classes online.

Home tuition is available in Gurgaon (Gurugram). Students elsewhere in India and abroad learn with us online. You can book a free demo class.

Written and checked by the Maths Bodhi team. Facts checked against official Cambridge International and Pearson sources, November 2026.

Frequently asked questions

Is a calculator allowed in IGCSE Additional Maths Paper 2?
Yes. The 0606 syllabus says a scientific calculator is required for Paper 2. Paper 1 is non-calculator.
How long is 0606 Paper 2?
2 hours, with 80 marks, worth 50% of the qualification. All questions are compulsory.
What accuracy should I give in Additional Maths Paper 2?
Unless the question says otherwise, give angles in degrees to at least 1 decimal place and other non-exact answers to at least 3 significant figures. Keep more figures in the working.
Can I use a graphic calculator in 0606 Paper 2?
The syllabus asks for a scientific calculator and refers to the Cambridge Handbook for calculator rules. Ask your exams officer which models your centre allows.
Do I need to show working on the calculator paper?
Yes. Cambridge says candidates must show all necessary working. The one stated exception is that correct answers to quadratic equations are acceptable without working on the calculator paper.
Should my calculator be in degrees or radians for 0606?
It depends on the question. Trigonometric equations can be set in either unit, but calculus with trigonometric functions always uses radians. Check every question.
0606 Paper 2Additional Maths calculator paper0606 accuracy rulesradians on calculatorIGCSE maths tutor

Related guides

Keep exploring this maths topic

IGCSE Maths18 Nov 2026

IGCSE Additional Maths Paper 1 (0606): How to Prepare for the Non-Calculator Paper

Cambridge 0606 Paper 1 has been non-calculator since 2025: 2 hours, 80 marks, half the grade, questions from any topic. What that means for logs, radians, surds and binomial coefficients, an annotated example with mark notes, a six-week plan and a checklist.

0606 Paper 1Additional Maths non-calculatorexact answers 06060606 exam preparation

By Maths Bodhi Team

Read guide

IGCSE Maths2 Nov 2026

IGCSE Maths Paper 4 (0580 Extended Calculator Paper): Rules, Accuracy, Worked Examples and a Practice Plan

Yes, Cambridge IGCSE 0580 Paper 4 is the Extended calculator paper: 2 hours, 100 marks, 50% of the grade. The official accuracy rules, which calculators are allowed, six worked examples, how early rounding loses marks, graph-drawing rules and a four-week plan.

IGCSE maths Paper 4IGCSE calculator paper0580 Paper 4IGCSE accuracy rules

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

Casio Calculator for IGCSE Maths: What Is Allowed and How to Use It

Using a Casio scientific calculator for IGCSE maths: the Cambridge and Pearson calculator rules, the functions worth learning, four worked examples and a pre-exam calculator check.

Casio calculator IGCSEIGCSE calculator rulesIGCSE maths Paper 4scientific calculator skills

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

The IGCSE Maths 3 Significant Figures Rule: Accuracy Explained With Examples

Cambridge IGCSE 0580 asks for non-exact answers to 3 significant figures and angles to 1 decimal place. What that means, when not to round, how early rounding loses marks, and a checklist.

IGCSE 3 significant figuresIGCSE maths accuracy0580 rounding rulesIGCSE calculator paper

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

IGCSE Additional Maths Trigonometry Questions (0606) with Full Solutions

Eleven original 0606-style trigonometry and circular measure questions, from sector arc lengths to identities, equations in sec, cosec and cot, radian equations and graphs, each followed by a full solution and notes on where marks are earned and lost.

0606 trigonometry practicetrig equations questionstrig identities proofsradians and sectors

By Maths Bodhi Team

Read guide

IGCSE Maths18 Nov 2026

0606 Grade Thresholds: How IGCSE Additional Maths Grade Boundaries Work (June 2026 Figures)

The official Cambridge grade thresholds for IGCSE Additional Mathematics 0606 in June 2026, how to read a component combination such as 12/22, why the marks for an A* differ between variants and series, what PUMs are, and how to use thresholds sensibly when setting a target.

0606 grade thresholdsAdditional Maths grade boundariesCambridge threshold tables0606 A star

By Maths Bodhi Team

Read guide