In Cambridge IGCSE Maths 0580, marks are given for correct working as well as for correct answers. Mark schemes use M marks for a valid method, A marks for accuracy, which normally need the method mark first, and B marks for a correct result that stands alone. A student with the wrong final answer can still earn most of the marks for a question, but only if the working is on the page.
That is why "show your working" is not just a teacher's habit. It is how the marks are built. This guide explains the mark types and the examiner abbreviations, with annotated examples of our own. If your child often gets "right method, wrong answer, no marks", a 0580 tutor who marks method every week can usually fix it within a few weeks.
What Cambridge says about working
Two official documents set the rules.
The 0580 syllabus (2025–2027):
- For all papers, candidates write answers on the question paper and must show all necessary working in the spaces provided.
- If a question asks candidates to show their working, they cannot gain full marks without clearly communicating their method, even if the final answer is correct.
- If a question asks you to show an answer to a given accuracy, you must show full working and give the result to at least one more degree of accuracy than asked.
The 2025 specimen mark scheme for Paper 4 sets out general principles:
- Marks are whole marks, never halves.
- Marks are awarded positively. They are not deducted for errors or omissions.
- Unless a question names a method, any correct method can earn full marks. But if a calculation is required, a scale drawing earns nothing.
- Once a mark is earned, wrong working that follows the correct answer is normally ignored.
- If a candidate misreads a number and uses it consistently, and the question is not made easier, they lose just 1 A or B mark for the misread.
The three types of mark
| Mark | What it is for | What it depends on |
|---|---|---|
| M (method) | A valid method applied to the problem | Nothing earlier, unless the scheme says "dep" |
| A (accuracy) | A correct answer or a correct step | The related M mark must be earned or implied |
| B (independent) | A correct result or statement | Not tied to a method mark |
The key line for students: an A mark usually cannot be earned without the M mark it belongs to. A correct answer that appears from nowhere, with no visible method, is a gamble.
Abbreviations in Cambridge mark schemes
The specimen mark scheme lists these. Here is what each means, in plain terms:
- awrt: answers which round to a stated value, so small differences in the last digit are allowed.
- cao: correct answer only. No follow-through.
- dep: this mark depends on an earlier mark.
- FT: follow through. A later answer can earn marks if it is correct for the student's own earlier (wrong) value.
- isw: ignore subsequent working after a correct answer.
- nfww: not from wrong working. A right answer reached by a wrong method does not score.
- oe: or equivalent, such as 3/4 instead of 0.75.
- SC: a special case, with partial credit set out in the scheme.
- soi: seen or implied, meaning the step can be implied by later work.
Annotated example 1: one question, three students
Question (calculator). Solve 2x² − 3x − 7 = 0, giving your answers correct to 2 decimal places.
The correct working: x = (3 ± √(9 + 56)) ÷ 4 = (3 ± √65) ÷ 4, so x = 2.77 or x = −1.27.
In our own mark-style notes, a question like this might carry 4 marks: B1 for √65 (or √(9 + 56)) seen, M1 for the correct formula substitution, and A1 for each root. The real split varies by question.
- Student A writes the substitution, √65 and both roots. All 4 marks.
- Student B writes x = (3 ± √(9 − 56)) ÷ 4, a sign error under the root, and then gets stuck. The substitution was mostly right, but the error is inside the method itself. In our notes, this might earn 0 or 1 mark, depending on the scheme. A sign slip inside the method is expensive.
- Student C writes only "2.77, −1.27" with no working, perhaps from an equation-solving function on a calculator. If the answers are right and the question does not ask for working, the scheme may give full marks. But one wrong digit and there is nothing to credit. If the question says "show your working", full marks are not possible.
The lesson: writing the substitution line costs ten seconds and protects most of the marks.
Annotated example 2: follow-through saves marks
Question. (a) A bag costs $45. Its price rises by 20%. Find the new price. (b) The new price is then reduced by 15%. Find the final price.
Correct: (a) 45 × 1.2 = $54. (b) 54 × 0.85 = $45.90.
A student writes $56 for part (a), which is wrong. In part (b), they write 56 × 0.85 = $47.60.
- Part (a): no accuracy mark. There may be a method mark if 45 × 1.2 was written and then miscalculated.
- Part (b): the method (× 0.85) is right and applied correctly to their own value. Where the scheme allows FT, this earns the part (b) marks.
The lesson: never abandon part (b) because part (a) looks wrong. Use your answer and keep going.
"Show that" questions
The syllabus defines "show (that)" as providing structured evidence that leads to a given result. The answer is printed, so the marks are only for the steps.
- Start from the information in the question, not from the answer.
- Write every step, including the one that looks obvious.
- End with the given result written in full.
- If the result is given to a set accuracy, write a more accurate value first. For example, to show that x = 4.73 to 2 decimal places, write x = 4.733 (or more) and then 4.73.
Our guide to IGCSE command words covers "show that" alongside "work out", "write down" and the rest.
How to write working that scores (our advice)
- One step per line. Examiners look for each M mark. A crowded line can hide one.
- Write the calculation before the answer. For example, "63 ÷ 1.4 = 45", not just "45".
- Keep unrounded values. Accuracy marks are lost by rounding early. See our rounding and accuracy rules.
- Do not cross out working you have not replaced. Do not rely on crossed-out work being marked.
- Label what you find. "Radius = 3.99" helps the examiner follow your method.
- Fill the answer line. Put the final answer on the line provided, with units.
A four-week plan to fix working habits (our advice)
- Week 1: redo five old questions you got wrong, writing one step per line.
- Week 2: mark your own work with M, A and B notes beside each line.
- Week 3: a timed half-paper, then count the method marks you would have earned on wrong answers.
- Week 4: a full paper. Compare the marks lost to missing working with week 1.
For full papers to practise on, our guide to using past papers explains which ones to choose. If you are sitting in March, our guide to the March series in India shows how close the grade bands can be.
Working checklist
☐ I write the calculation, not only the answer.
☐ I show the formula with numbers substituted.
☐ I keep full calculator values until the final answer.
☐ I use my own earlier answers in later parts, even if I doubt them.
☐ I never leave a question blank; a first step can earn a mark.
☐ For "show that", I end with the given result written in full.
☐ I put the final answer on the answer line, with units.
☐ I cross out only when I have written a replacement.
How Maths Bodhi helps
- A free demo where a tutor marks a sample of your child's working, M and A marks included.
- A tutor matched to 0580 Core or Extended, giving feedback line by line.
- Progress tracked through written method, so parents can see method marks rising.
- Grade 10 families can see our Class 10 IGCSE maths tutors at home for exam-year help.
Home tuition is available in Gurgaon (Gurugram). Students elsewhere in India and abroad learn with us online. You can book a free demo class.
Written and checked by the Maths Bodhi team. Facts checked against official Cambridge International and Pearson sources, November 2026.
Frequently asked questions
- Do you get marks for working in IGCSE Maths?
- Yes. Cambridge mark schemes give method (M) marks for a valid method and accuracy (A) marks for correct answers or steps. Working can earn marks even when the final answer is wrong.
- What do M1, A1 and B1 mean in an IGCSE mark scheme?
- M1 is a method mark, A1 is an accuracy mark that normally needs the method mark, and B1 is a mark for a correct result that does not depend on method.
- What does FT mean in an IGCSE mark scheme?
- FT means follow through. If you use your own wrong earlier answer correctly in a later part, you can still earn marks for that later part where the scheme allows it.
- Do you lose marks for wrong working in IGCSE?
- Marks are not deducted for errors. But a wrong method does not earn method marks, and a correct answer from wrong working may not score where the scheme says nfww.
- Can I get full marks with just the answer in IGCSE Maths?
- Sometimes, if the answer is fully correct and the question does not ask for working. If it says show your working, full marks need a clear method.
- Are half marks given in IGCSE Maths?
- No. Cambridge's general marking principles say marks are always whole marks.
