Command words are the instruction at the start of a question: "work out", "write down", "show that", "sketch". In Cambridge IGCSE Mathematics 0580, they tell you how much working to show and what form the answer should take. The syllabus has a table of the command words used in the papers. Reading them correctly is one of the cheapest ways to gain marks, because many lost marks come from answering a slightly different question from the one asked.
This guide explains each 0580 command word in our own words, with original examples. If your child's answers are often right but marked down, a 0580 tutor who trains exam technique can usually spot the pattern in one session.
The 0580 command words at a glance
The list below follows the command words table in the 0580 syllabus for 2025–2027. The explanations and tips are ours.
| Command word | What it asks you to do | How much working |
|---|---|---|
| Calculate | Find a value from the facts given | Show the calculation |
| Work out | Find a value, with or without a calculator | Show the method |
| Write down | Give an answer that needs no real working | Little or none |
| Write | Give the answer in a particular form | Enough to reach that form |
| Show (that) | Prove a result that is already printed | Every step; this is the whole mark |
| Determine | Find something and be certain of it | Enough to justify the answer |
| State | Say it clearly and briefly | None, usually |
| Give | Produce an answer from information or memory | Little |
| Explain | Give reasons, or say why or how | Written reasons, with evidence |
| Describe | Say what something is or its main features | Precise words, not working |
| Plot | Mark points accurately on a graph | A table of values helps |
| Sketch | Draw by hand, showing the key features | No graph paper needed; label features |
| Construct | Make an accurate drawing | Ruler and compasses; arcs left showing |
Write down vs work out
These two cause more confusion than any others.
"Write down" means the answer should come almost at once. Two original examples:
- Write down the value of 13². Answer: 169. (Squares to 15² are in the syllabus as recall.)
- Write down the gradient of the line y = 4x − 7. Answer: 4.
If you find yourself writing five lines for a "write down", re-read the question. It often means you are missing a shortcut, or the answer comes from an earlier part.
"Work out" means a method is expected, and the marks follow the method. For example: work out the average speed of a car that travels 63 km in 1 hour 24 minutes. The working (1 h 24 min = 1.4 h, then 63 ÷ 1.4) earns marks before the answer (45 km/h).
Show that: the answer is given, so the working is everything
The syllabus describes "show (that)" as providing structured evidence that leads to a given result. Since the answer is printed, a final line on its own earns nothing.
Example. Show that the solutions of x² + 4x − 3 = 0 are x = −2 ± √7.
- Complete the square: x² + 4x = (x + 2)² − 4.
- So (x + 2)² − 4 − 3 = 0, which gives (x + 2)² = 7.
- Square root both sides: x + 2 = ±√7.
- So x = −2 ± √7, as required.
Rules we teach for "show that":
- Start from the question's information, never from the answer.
- Do not skip "obvious" lines.
- Finish by writing the given result in full.
- If the result is to a stated accuracy, write one more decimal place first. Our accuracy guide has an example.
Sketch vs plot
Plot asks for accuracy. The syllabus conventions say plotted points should be clearly marked, for example as small crosses, and placed within half a small square. Linear graphs are ruled, and curves are joined smoothly.
Sketch asks for shape and key features, drawn freehand. It does not need graph paper or a scale, but it should show features such as intercepts, turning points and symmetry, with values marked on labelled axes.
Example. Sketch y = x² − 4.
- Roots: x² = 4, so the curve crosses the x-axis at −2 and 2.
- y-intercept: −4, which is also the minimum point (0, −4).
- Symmetry: about the y-axis.
A sketch with those three facts labelled is complete. A carefully plotted curve without them labelled can still lose marks. To practise both, use our guide to graphs of functions and graphical solutions.
Describe, explain and determine
Describe wants precise words. In transformations, "describe fully the single transformation" means the type plus every detail: for a rotation, the angle, the direction and the centre. Our transformations guides in this series show the full wording.
Explain wants reasons. "Explain why angle x is 72°" needs the geometric fact, such as "angles on a straight line add up to 180°", not just the arithmetic.
Determine wants a certain answer with justification. Example: determine whether the point (3, 5) lies on y = 2x − 1. Substitute: 2 × 3 − 1 = 5. Since y = 5, yes, it does. The substitution is the justification.
Construct
"Construct" means an accurate drawing with instruments. The syllabus says construction arcs must be shown and a ruler used for straight edges. Rubbing out the arcs removes the evidence. Our constructions and loci guide has step-by-step methods, and our page on exam equipment and rules lists the instruments you need.
Other wording to watch
Not every instruction is a command word, but these phrases change what you must do:
- "Give your answer in its simplest form": cancel fractions and ratios fully.
- "In terms of π" or "exact value": leave π or the surd in the answer.
- "Correct to 2 decimal places": this overrides the usual 3 s.f. rule.
- "You must show all your working": an answer alone cannot earn full marks. Read our guide to method marks and working.
- "Hence": use the previous part. A different method may not earn the marks.
A practice plan for command words (our advice)
- Week 1: go through one past paper and underline every command word. Next to each, write how much working it needs.
- Week 2: for ten "show that" questions, write full proofs. Check that every line follows from the one before.
- Week 3: pair sketches with plots. Sketch first, then plot the same graph, and compare.
- Week 4: a full timed paper. Afterwards, list any marks lost because you misread the instruction.
Use official papers for this. Our guide to finding and using past papers explains where to get them and how to use older ones. If your school uses the 9–1 version of the course, the command words are the same; our 0980 vs 0580 comparison explains the difference.
Command words checklist
☐ I underline the command word before I start each question.
☐ For "write down", I expect a quick answer and check for a shortcut.
☐ For "work out" and "calculate", I show the method.
☐ For "show that", I start from the question and end with the given result.
☐ For "sketch", I label intercepts, turning points and symmetry.
☐ For "plot", I mark points with small crosses and draw a smooth curve.
☐ For "explain" and "give a reason", I write the geometric or mathematical fact.
☐ For "construct", I leave my construction arcs visible.
How Maths Bodhi helps
- A free demo where a tutor checks how your child reads and answers command words.
- A tutor matched to 0580 Core or Extended, giving feedback on exam technique, not just maths.
- Written-method tracking, so parents see fewer marks lost to misreading.
- Younger students can start these habits early with our Class 9 IGCSE maths tutors.
Home tuition is available in Gurgaon (Gurugram). Students elsewhere in India and abroad learn with us online. You can book a free demo class.
Written and checked by the Maths Bodhi team. Facts checked against official Cambridge International and Pearson sources, November 2026.
Frequently asked questions
- What are command words in IGCSE Maths?
- They are the instruction words at the start of a question, such as work out, write down, show that and sketch. The 0580 syllabus lists the command words used in the papers.
- What does write down mean in IGCSE Maths?
- It means give an answer without significant working. If you need many lines for a write down question, check for a shortcut or an earlier part.
- What does show that mean in IGCSE Maths?
- Show that means give structured evidence that leads to a result printed in the question. The marks are for the steps, so every line must be written.
- What is the difference between sketch and plot in IGCSE?
- Plot means mark points accurately and draw the graph on a grid. Sketch means a freehand drawing that shows the key features, such as intercepts and turning points, with values labelled.
- Do I need to show working for calculate questions?
- Yes, it is wise. Calculate and work out questions give marks for method, which can be earned even if the final answer is wrong.
- What does hence mean in an IGCSE maths question?
- Hence means use the result from the previous part. Using a different method may not earn the marks.
