A related rates problem gives you how fast one quantity is changing and asks how fast a connected quantity is changing at one particular instant. You solve it by writing an equation that links the quantities, differentiating both sides with respect to time t, and only then substituting the values at that instant. The six worked solutions below rise from a one-line balloon problem to a camera angle that needs a trig derivative.
The six-step method
Use the same steps every time; in our experience most lost marks come from skipping step 2 or doing step 5 before step 4.
- Draw and label. Sketch the situation at a general time. Give every changing quantity a letter (x, y, h, r, θ). Write fixed numbers, such as a ladder's length, as numbers.
- List the rates. Write the given rate and the wanted rate in derivative notation, with units and signs. "The water level falls at 2 cm/min" means dh/dt = −2.
- Find the linking equation. Pythagoras, similar triangles, a volume formula or a trig ratio. If the equation has an extra variable you have no rate for, eliminate it now using geometry.
- Differentiate with respect to t. Every variable gets the chain rule: d/dt (x²) = 2x · dx/dt.
- Substitute the instant. Only now put in the values at the moment asked about. Find any missing value (often with Pythagoras) first.
- Answer the question asked. Give units and say what the sign means: negative means decreasing.
Related rates is usually a Calculus I topic, and our college maths tutoring page for US students explains how online sessions with Ajay Vatsyayan fit around a US semester.
Which equation links the variables?
| situation | linking equation | watch for |
|---|---|---|
| ladder, two moving objects, plane and radar | x² + y² = D² (Pythagoras) | find the missing side before substituting |
| water in a cone, shadows, similar shapes | similar triangles, e.g. r/h = R/H | use the water's radius, not the tank's |
| balloon, snowball, spreading circle | V = (4/3)πr³, S = 4πr², A = πr² | volume rate vs radius rate |
| cone or cylinder volume | V = (1/3)πr²h, V = πr²h | eliminate r first if only h has a rate |
| angle of elevation, rotating light | tan θ = opposite/adjacent | θ must be in radians |
Level 1: a balloon (one variable, one formula)
Air is pumped into a spherical balloon at 50 cm³/s. How fast is the radius increasing when r = 10 cm? How fast is the surface area increasing at that moment?
Given dV/dt = 50; want dr/dt at r = 10.
V = (4/3)πr³, so dV/dt = 4πr² · dr/dt.
50 = 4π(100) · dr/dt, giving dr/dt = 50/(400π) = 1/(8π) ≈ 0.0398 cm/s.
For the surface area, S = 4πr², so dS/dt = 8πr · dr/dt = 8π(10) · 1/(8π) = 10 cm²/s.
Notice the radius grows slowly even though the volume grows quickly: a large balloon needs a lot of air for each extra millimetre.
Level 2: a ladder sliding down a wall (Pythagoras)
A 5 m ladder leans against a vertical wall. Its foot slides away from the wall at 0.4 m/s. How fast is the top sliding down when the foot is 3 m from the wall? How fast is the angle between the ladder and the ground changing?
Let x be the distance from the wall to the foot and y the height of the top. Then x² + y² = 25, with dx/dt = 0.4.
Differentiate: 2x · dx/dt + 2y · dy/dt = 0.
At the instant, x = 3, so y = √(25 − 9) = 4. Substituting:
2(3)(0.4) + 2(4) · dy/dt = 0, so dy/dt = −0.3 m/s.
The top slides down at 0.3 m/s (the minus sign says y is decreasing).
For the angle θ at the ground, cos θ = x/5. Differentiate: −sin θ · dθ/dt = (1/5) · dx/dt. At the instant sin θ = 4/5, so
dθ/dt = −0.4 / (5 × 0.8) = −0.1 rad/s.
The angle shrinks at 0.1 radians per second.
Level 3: filling a conical tank (eliminate a variable first)
An inverted cone-shaped tank is 12 m deep with a top radius of 4 m. Water flows in at 2 m³/min. How fast is the water level rising when the water is 6 m deep?
The water forms a smaller cone with radius r and depth h. By similar triangles, r/h = 4/12, so r = h/3. We have no rate for r, so eliminate it before differentiating:
V = (1/3)πr²h = (1/3)π(h/3)²h = πh³/27
dV/dt = (πh²/9) · dh/dt
At h = 6: 2 = (36π/9) · dh/dt = 4π · dh/dt, so dh/dt = 1/(2π) ≈ 0.159 m/min.
The level rises more slowly as the tank fills, because the surface gets wider.
Level 4: two cars, one approaching and one leaving
Car A is 3 km north of a junction, driving south towards it at 50 km/h. Car B is 4 km east of the junction, driving east away from it at 70 km/h. Is the distance between them increasing or decreasing, and how fast?
Let y be A's distance north and x be B's distance east. Then D² = x² + y², with dx/dt = 70 and dy/dt = −50 (A's distance to the junction is shrinking).
2D · dD/dt = 2x · dx/dt + 2y · dy/dt
At the instant D = √(16 + 9) = 5, so
dD/dt = (4 × 70 + 3 × (−50)) / 5 = 130/5 = 26 km/h.
The distance is increasing at 26 km/h. Had you written dy/dt = +50 you would get 86 km/h, a typical sign error.
Level 5: a shadow (which rate is being asked for?)
A person 1.8 m tall walks away from a 6 m lamp post at 1.4 m/s. How fast is their shadow lengthening? How fast is the tip of the shadow moving?
Let x be the person's distance from the post and s the shadow length. Similar triangles (lamp to tip of shadow, and head to tip):
6/(x + s) = 1.8/s, so 6s = 1.8x + 1.8s, giving s = (3/7)x.
ds/dt = (3/7) · dx/dt = (3/7)(1.4) = 0.6 m/s.
The tip is at distance x + s from the post, so it moves at 1.4 + 0.6 = 2.0 m/s.
The two questions have different answers, and many students give 0.6 for both. Notice also that neither answer depends on where the person is: this problem needs no "instant" at all.
Level 6: a camera tracking a rocket (trig and radians)
A camera is 600 m from a launch pad. A rocket rises vertically, and when it is 800 m up it is climbing at 150 m/s. How fast must the camera's angle of elevation increase at that moment?
Let h be the height and θ the angle of elevation. Then tan θ = h/600.
sec²θ · dθ/dt = (1/600) · dh/dt
At the instant the line of sight is √(600² + 800²) = 1000 m long, so sec θ = 1000/600 and sec²θ = 25/9. Then
dθ/dt = (150/600) × (9/25) = 0.09 rad/s.
That is about 5.2 degrees per second, but the derivative of tan θ is sec²θ only when θ is in radians, so give the radian answer unless asked to convert.
Six traps that cost marks
- Substituting too early. In the ladder, putting x = 3 into the equation before differentiating turns x into a constant, and its rate becomes 0. Differentiate the general equation, then substitute.
- Wrong signs. Decreasing quantities have negative rates. Decide each sign from the picture before you start (level 4).
- Using the tank instead of the water. In the cone, r and h belong to the water. The 4 m and 12 m only fix the ratio.
- Forgetting the chain rule on one term. d/dt (r²h) needs the product rule as well: 2r(dr/dt)h + r²(dh/dt). Eliminating r first (level 3) avoids this.
- Answering a different question. Shadow length or tip speed? Rate of area or rate of radius? Reread the last line.
- Mixed units and degrees. Convert km and m, or minutes and seconds, before substituting, and keep angles in radians.
Practice problems with answers
- A square's side grows at 0.5 cm/s. How fast is its area growing when the side is 8 cm?
- A cube's volume grows at 12 cm³/s. How fast is each edge growing when the edge is 2 cm?
- A 10 m ladder's top slides down a wall at 0.5 m/s. How fast is the foot moving away when the top is 6 m high?
- An inverted cone is 10 m deep with top radius 5 m. Water drains out at 3 m³/min. How fast is the level changing when the water is 4 m deep?
- A plane flies horizontally at 3 km altitude and 500 km/h, and passes directly over a radar station. How fast is its distance from the station increasing when that distance is 5 km?
- A spherical snowball melts so that its radius decreases at 0.2 cm/min. How fast is its volume changing when r = 5 cm?
Answers:
- dA/dt = 2(8)(0.5) = 8 cm²/s.
- 12 = 3(2²) · ds/dt, so ds/dt = 1 cm/s.
- Foot is 8 m out; dx/dt = −6(−0.5)/8 = 0.375 m/s away from the wall.
- r = h/2, V = πh³/12, dh/dt = −3/(4π) ≈ −0.239 m/min (falling).
- Horizontal distance is 4 km; dD/dt = 4(500)/5 = 400 km/h.
- dV/dt = 4π(25)(−0.2) = −20π ≈ −62.8 cm³/min.
Every answer above, and every worked value, was checked in Python.
Where related rates leads
Related rates is the chain rule used in reverse: you know dx/dt and want dy/dt through an equation linking x and y. Before this topic you need limits and derivative rules (our page on the epsilon-delta definition of a limit covers the foundation). Straight after it most courses move to optimisation and then integration, including integration by parts with the tabular method.
Further on, the same idea grows in two directions. In multivariable calculus, rates through several variables need the multivariable chain rule; see partial derivatives, the gradient and directional derivatives and our advanced calculus tutoring page. When the rate itself depends on the current amount (a tank that leaks faster when fuller), you are writing a differential equation, the subject of first-order differential equations.
How Maths Bodhi helps
Related rates problems feel easy in a worked example and hard on a blank page, because the skill is setting up the picture and equation. In online sessions we give a fresh problem, let you set it up, then check your diagram, signs and the moment you substituted. We review your own attempts; we don't complete graded work. The university maths tutoring hub covers the courses that come after Calculus I.
Home tuition is available in Gurgaon (Gurugram). Students elsewhere in India and abroad learn with us online. You can book a free demo class.
Written and checked by the Maths Bodhi team (November 2026).
Frequently asked questions
- What are the steps to solve related rates problems?
- Draw and label, list the given and wanted rates with signs, write an equation linking the variables, differentiate with respect to t, then substitute the values at the instant.
- When do you plug in values in related rates?
- After differentiating; plugging in earlier turns a changing quantity into a constant and loses its rate.
- How do you do the related rates cone problem?
- Use similar triangles to write the water's radius in terms of its depth, substitute into V = (1/3)πr²h, then differentiate.
- Why is my related rates answer negative?
- A negative rate means that quantity is decreasing, such as the top of a sliding ladder or a draining water level.
- Do angles have to be in radians in related rates?
- Yes; the derivative formulas for trig functions assume radians, so give dθ/dt in rad/s unless told otherwise.
- Is related rates in Calc 1 or Calc 2?
- It is usually taught in Calculus I as an application of derivatives, but check your own course schedule.
