Strong JEE students often find first-year maths at an IIT harder than expected because the course marks something JEE never did: exact definitions, justified steps and short proofs, plus abstract linear algebra and several-variable calculus that JEE barely touches. The calculus you already know still helps, but the way you must write it changes. Below: what the current courses contain, six worked examples showing exactly what changes, a first-semester plan, the mistakes we see most, and a practice set with answers.
What is actually in IIT first-year maths
Codes and semester placement differ between institutes and between batches, so always read your own course page. This is what four institutes publish for current batches (read on their official pages in November 2026):
| Institute (scheme or batch) | First-year maths courses | Worth knowing |
|---|---|---|
| IIT Delhi (curriculum 2025 onwards) | MTL1001 Mathematics I Calculus; MTL1002 Mathematics II Linear Algebra and Differential Equations | B.Tech CSE takes MTL1001 in Semester 1 and MTL1002 in Semester 2. Calculus includes completeness and Cauchy sequences |
| IIT Kanpur (Courses of Study 2026) | MTH111M Single Variable Calculus; MTH112M Application of Single Variable Calculus and Several Variable Calculus; MTH113M Introduction to Linear Algebra; MTH114M Introduction to Ordinary Differential Equations | BT templates place MTH 111 and 112 in Semester 1, MTH 113 and 114 in Semester 2 |
| IIT Bombay (department booklet, Sep 2025) | MA 105 Calculus; MA 110 Linear Algebra and Differential Equations (half-semester versions MA 109, MA 111, MA 106, MA 108) | MA 110 covers abstract vector spaces, rank-nullity and Picard's theorem |
| IIT Madras (2024 batch onwards) | MA1101 Calculus, mandatory, 12 credits | Includes Fourier series. Linear algebra, differential equations, probability and complex variables are listed electives (MA2101 to MA2104). Up to the 2023 batch, MA1101 was Functions of Several Variables |
Across these four, none teaches complex analysis in the first year, and Laplace transforms sit inside the ODE courses at Bombay, Delhi and Kanpur. NITs and other institutes set their own syllabi, so check yours before you plan.
Our IIT first-year maths tutoring page explains how online sessions with Ajay Vatsyayan follow your own course outline and tutorial sheets.
The shift in one list
- JEE: find the answer fast; nobody reads your working. First year: the working is the answer, and a correct number with no reason can score close to zero.
- JEE: formulas and shortcuts. First year: definitions and theorems with their conditions.
- JEE: vectors are arrows and triples. First year: polynomials, functions and solutions of ODEs are vectors too.
- JEE: one variable, mostly. First year: two and three variables, where limits and maxima behave differently.
Six worked examples of what changes
Example 1: a limit you could compute, now proved
In JEE you would substitute: x² + x → 6 as x → 2. The course asks you to prove it from the definition.
Scratch work. Factorise: x² + x − 6 = (x − 2)(x + 3). The first factor is small; we need a bound on the second. If we insist that δ ≤ 1, then 1 < x < 3, so 4 < x + 3 < 6.
Proof. Let ε > 0 and choose δ = min(1, ε/6). If 0 < |x − 2| < δ, then x + 3 lies between 4 and 6, so
Then |x² + x − 6| = |x − 2| · |x + 3| < 6δ ≤ ε.
Hence the limit is 6. ∎
The answer was never in doubt. The marks are for the choice of δ and the chain of inequalities. Our guide to the epsilon-delta definition of a limit has a full method for choosing δ.
Example 2: sequences with ε-N, and a series trap
Show that a_n = (2n + 1)/(n + 3) → 2.
The gap is a_n − 2 = (2n + 1 − 2n − 6)/(n + 3) = −5/(n + 3), so its size is 5/(n + 3).
Proof. Let ε > 0 and pick an integer N ≥ 5/ε. For n ≥ N we have n + 3 > 5/ε, so 5/(n + 3) < ε. ∎ For ε = 0.001, N = 5000 works.
The trap that follows in the same unit: the terms of ∑ 1/n tend to 0, yet the series diverges. Terms tending to 0 is necessary for convergence, never sufficient. Our series convergence tests flowchart shows which test to try first.
Example 3: a "show that" with the mean value theorem
Show that for all real a and b, the inequality |sin a − sin b| ≤ |a − b| holds.
Proof. If a = b there is nothing to prove. Otherwise sin is continuous on the closed interval between a and b and differentiable inside it, so by the mean value theorem there is a c strictly between a and b with
sin a − sin b = cos c · (a − b).
Taking absolute values and using |cos c| ≤ 1 gives the result. ∎
Where the marks go: naming the theorem, checking both hypotheses, and saying where c lies. Students who write only the middle line usually lose most of the credit. If proofs are new to you, read how to start real analysis proofs.
Example 4: linear algebra without arrows
Let P₂ be the polynomials of degree at most 2, and define T: P₂ → R² by T(p) = (p(0), p(1)). Find the matrix of T, its rank and its kernel.
T is linear because evaluation respects sums and scalar multiples: T(p + q) = T(p) + T(q) and T(kp) = kT(p).
Use the basis {1, x, x²}. Then T(1) = (1, 1), T(x) = (0, 1), T(x²) = (0, 1). These are the columns, so the matrix has rows (1, 0, 0) and (1, 1, 1). The rows are independent, so the rank is 2.
Kernel: p = a + bx + cx² with p(0) = a = 0 and p(1) = a + b + c = 0. So b = −c and p = c(x² − x). The kernel is spanned by x² − x, so the nullity is 1.
Check with rank-nullity: 2 + 1 = 3 = dim P₂. ✓
Nothing here is hard to compute. What is new is that the "vectors" are polynomials, and every claim (linear, basis, dimension) must be justified. Our piece on why linear algebra feels hard explains this jump in more detail.
Example 5: two variables, where paths matter
Part (a). Does f(x, y) = 2x²y/(x⁴ + y²) have a limit at (0, 0)?
Along y = mx: f = 2mx³/(x⁴ + m²x²) = 2mx/(x² + m²) → 0.
Along y = x²: f = 2x⁴/(x⁴ + x⁴) = 1.
Two paths give two values, so the limit does not exist. In one variable you only approach from two sides; in two variables there are infinitely many paths, and every straight line agreeing proves nothing.
Part (b). Classify the critical points of g(x, y) = x³ − 6xy + y².
g_x = 3x² − 6y = 0 and g_y = −6x + 2y = 0. The second gives y = 3x; then 3x² = 18x, so x = 0 or x = 6. Critical points: (0, 0) and (6, 18).
Second derivatives: g_xx = 6x, g_yy = 2, g_xy = −6, so D = g_xx·g_yy − (g_xy)² = 12x − 36.
At (0, 0): D = −36 < 0, a saddle point.
At (6, 18): D = 36 > 0 and g_xx = 36 > 0, a local minimum with g(6, 18) = −108.
For gradients and the chain rule in several variables, see our guide to partial derivatives and the directional derivative.
Example 6: differential equations as linear algebra
Solve y″ + y′ − 6y = 0 with y(0) = 1, y′(0) = 7, and explain why the answer is complete.
The auxiliary equation r² + r − 6 = (r − 2)(r + 3) = 0 gives e^(2x) and e^(−3x). Their Wronskian is
e^(2x)·(−3e^(−3x)) − e^(−3x)·(2e^(2x)) = −5e^(−x) ≠ 0,
so they are independent. The solutions form a vector space of dimension 2, and these two functions are a basis, so y = c₁e^(2x) + c₂e^(−3x) is every solution.
Initial conditions: c₁ + c₂ = 1 and 2c₁ − 3c₂ = 7, so c₁ = 2, c₂ = −1 and y = 2e^(2x) − e^(−3x).
The method is the one you knew from school. The new part is the reason two solutions are enough: dimension, and the existence and uniqueness theorem. Our post on first-order differential equations covers the other half of a typical ODE unit.
A first-semester plan
Weeks 1–2. Keep a definitions notebook. After every lecture, write each new definition and theorem in your own words, with its conditions. Attempt every tutorial question before the tutorial, even if you only get halfway.
Weeks 3–5. Practise writing. Take one solved tutorial question a day and rewrite it as full sentences: what is given, which theorem, why it applies, conclusion. Do two ε-δ or ε-N proofs a week until choosing δ feels routine.
Before the first quiz or minor test. Work through any past papers your department shares, under time. Mark them against the model solution, line by line, not just the final answer.
Weeks 6–10. Several variables and linear algebra usually arrive in force here. For each new idea, make one example and one non-example (a set that is a subspace and one that is not; a function with a two-variable limit and one without).
After each quiz. Sort every lost mark: did not know the idea, knew it but could not write the argument, or made a slip. The fixes differ: reteach, rewrite, or slow down and check.
Before the end-semester exam. One page per topic: definitions, theorems with conditions, and two typical questions you can do without notes.
Mistakes we see in the first year
- Answering a "prove" question with a calculation. Fix: state what you must show, then show it.
- A δ that depends on x. Fix: δ may depend on ε (and the point), never on x.
- Using a theorem without its hypotheses. Mean value theorem on a function that is not differentiable; L'Hospital's rule where the limit is not 0/0 or ∞/∞. Fix: check and write the conditions every time.
- Concluding a two-variable limit exists because all lines agree. Fix: paths can only disprove; to prove a limit, bound the function (polar coordinates often help).
- "The terms tend to 0, so the series converges." Fix: apply an actual test.
- Calling a set a subspace without checking. The set of p in P₂ with p(1) = 1 is not a subspace: it does not contain the zero polynomial. Fix: test zero, sums and scalar multiples.
- Forgetting D = 0 is inconclusive in the second-derivative test. Fix: say so and look at the function directly.
- Leaving tutorial sheets until the night before. Topics move fast, and the sheets are where you actually learn them.
Practice set
- Prove that lim (x→1) (4x + 3) = 7.
- For a_n = 3n/(n + 2), find the smallest N such that the distance from a_n to 3 is less than 0.01 for all n ≥ N.
- Show that the set of (x, y, z) with x + 2y − z = 0 is a subspace of R³, and find a basis.
- Find the rank and nullity of the linear map R⁴ → R³ with matrix rows (1, 2, 0, 1), (2, 4, 1, 3), (3, 6, 1, 4).
- Classify the critical point of f(x, y) = x² + xy + y² − 3x.
- Does ∑ n/(n² + 1) converge?
Answers.
- δ = ε/4 works, because the distance is 4 times the distance from x to 1.
- The distance is 6/(n + 2), which is below 0.01 when n + 2 > 600, so N = 599.
- It contains 0 and is closed under sums and scalar multiples (the condition is linear). Basis (1, 0, 1), (0, 1, 2); dimension 2.
- Row 3 = row 1 + row 2 and rows 1 and 2 are independent, so rank 2 and nullity 4 − 2 = 2.
- f_x = 2x + y − 3 = 0 and f_y = x + 2y = 0 give (2, −1). D = 3 > 0 and f_xx = 2 > 0: local minimum, f(2, −1) = −3.
- No. By limit comparison with ∑ 1/n (the ratio of terms tends to 1), it diverges.
Where this leads
The linear algebra in Example 4 grows into eigenvalues, diagonalisation and the spectral theorem, all inside the first-year courses above. The two-variable calculus leads into line and surface integrals and the theorems of Green, Gauss and Stokes (in IIT Bombay's MA 105 and IIT Kanpur's MTH112M), covered in our guide to vector calculus theorems. The proof habits from Examples 1 to 3 are what later analysis, probability and numerical courses assume you already have.
How Maths Bodhi helps
Sessions work from your own course page, tutorial sheets and past quizzes. We explain the ideas, practise the proofs and question types with you, and review your own attempts line by line. We never complete graded assignments, quizzes or exams. For other first-year and later courses, start at our university maths hub.
Written and checked by the Maths Bodhi team (November 2026).
Home tuition is available in Gurgaon (Gurugram). Students elsewhere in India and abroad learn with us online. You can book a free demo class.
Frequently asked questions
- Why is IIT first-year maths so hard after JEE?
- JEE rewards speed with no marks for working, while first-year courses mark exact definitions, justified steps and short proofs.
- What is in the IIT first-year maths syllabus?
- Single- and several-variable calculus, linear algebra and differential equations at most IITs, but codes and order vary by institute and batch, so read your own course page.
- Is complex analysis taught in IIT first year?
- Not at IIT Bombay, Delhi, Kanpur or Madras in the current first-year courses; check your own institute if it is not one of these.
- Do I need to learn proofs in IIT first year?
- Yes, short ones: ε-δ and ε-N arguments, mean value theorem inequalities and checking that a set is a subspace are typical.
- How should I prepare for my first IIT maths quiz?
- Learn definitions with their conditions, attempt every tutorial question first, and practise writing full solutions under time.
- Can a tutor do my tutorial sheets?
- No. A tutor can explain the ideas and review your own attempts, but Maths Bodhi does not complete graded work.
