WhatsApp us
University Maths2 Nov 2026

Laplace Transforms in Engineering Maths: An Exam Guide with Worked Examples

The Laplace transform questions that come up most in B.Tech and first-year engineering maths, the formula table to learn, six worked examples from direct transforms to unit-step initial value problems, the slips that cost marks, and a practice set with answers.

Laplace Transforms in Engineering Maths: An Exam Guide with Worked Examples

Laplace transform questions in engineering maths follow a small number of patterns: find a transform, use a shifting or multiplication property, invert by partial fractions or completing the square, and solve an initial value problem, sometimes with a unit step forcing. Learn one table, practise the algebra, and this becomes one of the most predictable sections of the paper. Below are the table, six worked examples in rising difficulty, the slips that cost marks and a practice set with answers.

What the paper usually asks

Depending on your scheme, Laplace transforms sit in M2, M3 or a separate transforms course, so check your own syllabus and past papers. The questions themselves are very consistent:

  1. Find L{f(t)} from the table and the linearity, first shifting and multiply-by-t rules.
  2. Find L⁻¹{F(s)}, almost always by partial fractions or by completing the square.
  3. Use the second shifting theorem with unit step functions u(t − a).
  4. Solve a linear ODE with initial conditions (the highest-mark question).
  5. Less often: convolution, periodic functions, the Dirac delta, or a pair of simultaneous ODEs.

Our engineering mathematics tutoring page explains how sessions with Ajay Vatsyayan cover these question types against your university's own syllabus.

The table worth memorising

Here L{f(t)} = F(s) = ∫₀^∞ e^(−st) f(t) dt.

f(t)F(s)Note
11/ss greater than 0
tⁿn!/s^(n+1)n = 0, 1, 2, …
e^(at)1/(s − a)
sin btb/(s² + b²)
cos bts/(s² + b²)
e^(at)f(t)F(s − a)first shifting: replace s by s − a
t·f(t)−F′(s)multiply by t: differentiate and change sign
u(t − a)f(t − a)e^(−as)F(s)second shifting: needs f written in (t − a)
y′(t)sY − y(0)
y″(t)s²Y − s·y(0) − y′(0)
(f ∗ g)(t)F(s)G(s)convolution

The last two derivative rules are where the initial conditions enter. Most lost marks in the ODE question come from one missing term here.

Worked examples

Example 1: a direct transform

Find L{e^(−2t)cos 3t + t³}.

Linearity lets us transform each term separately.

For e^(−2t)cos 3t: L{cos 3t} = s/(s² + 9). The factor e^(−2t) means a = −2, so replace s by s + 2:

(s + 2)/((s + 2)² + 9)

For t³: 3!/s⁴ = 6/s⁴.

Answer: (s + 2)/((s + 2)² + 9) + 6/s⁴.

Example 2: multiplying by t

Find L{t sin 2t}.

L{sin 2t} = 2/(s² + 4) = 2(s² + 4)^(−1).

Differentiate with respect to s: −2·2s(s² + 4)^(−2) = −4s/(s² + 4)².

Change the sign.

Answer: 4s/(s² + 4)².

Example 3: inverse with a repeated factor

Find L⁻¹{(3s + 5)/((s + 1)²(s + 3))}.

A repeated factor (s + 1)² needs two terms:

(3s + 5)/((s + 1)²(s + 3)) = A/(s + 1) + B/(s + 1)² + C/(s + 3)

Multiply out: 3s + 5 = A(s + 1)(s + 3) + B(s + 3) + C(s + 1)².

s = −1: 2 = 2B, so B = 1.

s = −3: −4 = 4C, so C = −1.

Compare s² coefficients: 0 = A + C, so A = 1.

So F(s) = 1/(s + 1) + 1/(s + 1)² − 1/(s + 3). The middle term is L{t} shifted by e^(−t).

Answer: e^(−t) + t·e^(−t) − e^(−3t).

Example 4: inverse by completing the square

Find L⁻¹{(2s + 7)/(s² + 4s + 13)}.

The denominator has no real roots, so complete the square: s² + 4s + 13 = (s + 2)² + 9.

Rewrite the numerator in terms of (s + 2): 2s + 7 = 2(s + 2) + 3.

F(s) = 2·(s + 2)/((s + 2)² + 9) + 1·3/((s + 2)² + 9)

Each piece is a cosine or sine transform shifted by e^(−2t). The 3 in the second numerator is exactly the b needed for sin 3t.

Answer: e^(−2t)(2 cos 3t + sin 3t).

Example 5: solving an initial value problem

Solve y″ − 3y′ + 2y = 4e^(3t) with y(0) = 1, y′(0) = 0.

Transform. Using the derivative rules:

[s²Y − s − 0] − 3[sY − 1] + 2Y = 4/(s − 3)

Collect Y. (s² − 3s + 2)Y = s − 3 + 4/(s − 3)

Since s² − 3s + 2 = (s − 1)(s − 2), and combining the right side over (s − 3):

Y = (s² − 6s + 13)/((s − 1)(s − 2)(s − 3))

Partial fractions (cover-up works because the factors are distinct):

at s = 1: (1 − 6 + 13)/((−1)(−2)) = 4

at s = 2: (4 − 12 + 13)/((1)(−1)) = −5

at s = 3: (9 − 18 + 13)/((2)(1)) = 2

Y = 4/(s − 1) − 5/(s − 2) + 2/(s − 3)

Answer: y = 4e^t − 5e^(2t) + 2e^(3t).

Check. y(0) = 4 − 5 + 2 = 1 and y′(0) = 4 − 10 + 6 = 0. Both conditions hold. If you solve the same equation by the characteristic equation and undetermined coefficients, as in our second order differential equations guide, you get the same answer; Laplace simply builds the initial conditions in from the start.

Example 6 (exam level): a switched-on input

Solve y′ + 2y = 4u(t − 1) with y(0) = 0. Here the input is 0 until t = 1 and then 4.

Transform: sY − 0 + 2Y = 4e^(−s)/s, so

Y = 4e^(−s)/(s(s + 2))

Ignore e^(−s) for a moment. Partial fractions: 4/(s(s + 2)) = 2/s − 2/(s + 2), whose inverse is g(t) = 2 − 2e^(−2t).

The factor e^(−s) shifts g by 1 and switches it on at t = 1 (second shifting theorem):

Answer: y = 2(1 − e^(−2(t − 1)))·u(t − 1).

So y = 0 for t below 1, then rises towards 2. A one-line sketch like this is often worth a mark on its own.

Choosing the inverse technique

What F(s) looks likeTechnique
distinct linear factorspartial fractions with cover-up
repeated linear factor (s − a)²terms A/(s − a) + B/(s − a)²
irreducible quadraticcomplete the square, split into cos and sin parts
product of two known transformsconvolution, or partial fractions if simpler
a factor e^(−as)invert without it, then shift by a and multiply by u(t − a)
derivative-like form, e.g. s/(s² + b²)²recognise as −(d/ds) of a known transform

Slips that cost marks

  • Missing initial-condition terms. L{y″} = s²Y − s·y(0) − y′(0). Write all three terms, even when a value is zero, so the marker sees the rule.
  • Mixing up the two shifting theorems. e^(at)f(t) shifts in s; u(t − a)f(t − a) multiplies by e^(−as). Name the theorem you are using.
  • Second shift without rewriting f. L{t·u(t − 2)} is not e^(−2s)/s². Write t = (t − 2) + 2 first, giving e^(−2s)(1/s² + 2/s).
  • Partial fractions with a repeated factor. Leaving out the A/(s + 1) term in Example 3 makes the system impossible to solve. Count terms against the degree.
  • Completing the square but not the numerator. In Example 4 the numerator must be written in terms of (s + 2) as well; otherwise the sine coefficient comes out wrong.
  • Not checking. Substitute t = 0 into your answer to confirm the initial conditions. It takes seconds.

Practice set

  1. Find L{t²e^(3t)}.
  2. Find L⁻¹{(s + 5)/(s² + 2s + 5)}.
  3. Find L{t·u(t − 2)}.
  4. Solve y″ + y = 2 with y(0) = 0, y′(0) = 1.
  5. Find L⁻¹{1/(s(s² + 1))}.

Answers

  1. 2/(s − 3)³.
  2. e^(−t)(cos 2t + 2 sin 2t).
  3. e^(−2s)(1/s² + 2/s).
  4. y = 2 − 2 cos t + sin t.
  5. 1 − cos t (by partial fractions, or as the convolution of 1 and sin t).

A two-week plan before the exam

Days 1–4. Learn the table above and drill 15 direct transforms, including first shifting and multiply-by-t.

Days 5–8. Inverse transforms only: distinct factors, repeated factors and completed squares. Partial fractions decide this topic, so give them their own days.

Days 9–11. One full initial value problem per day, first and second order, plus one unit step problem. The method for first order linear equations is a useful cross-check for first order cases.

Days 12–14. Laplace questions from two past papers under time, marked against the slips list.

If you are resitting, our guide on clearing an engineering maths back paper shows how to plan the wider paper.

Where Laplace leads

Transfer functions in control and signals courses are Laplace transforms of input–output equations, so this topic keeps returning after the maths course ends. Fourier methods are the periodic-signal cousin; see our Fourier series guide. For differential equations beyond engineering maths, including systems and boundary value problems, see our online differential equations support.

How Maths Bodhi helps

We work through your syllabus and past papers with you and review your own attempts, line by line. Students starting B.Tech after JEE may find our note on moving from JEE to IIT first-year maths useful, and the university maths tutoring hub lists all courses we teach. We teach, practise and review; we don't complete graded assignments or exams.

Home tuition is available in Gurgaon (Gurugram). Students elsewhere in India and abroad learn with us online. You can book a free demo class.

Written and checked by the Maths Bodhi team (November 2026).

Frequently asked questions

Is the Laplace transform in M2 or M3?
It depends on your university and scheme, so check your own syllabus.
What is the most common Laplace transform exam question?
Solving a linear differential equation with initial conditions, which combines transforms, partial fractions and inverse transforms.
How do you solve a differential equation using the Laplace transform?
Transform both sides using the derivative rules, solve for Y(s), split into partial fractions and invert term by term.
Why do I lose marks on inverse Laplace transforms?
Usually through partial fractions errors with repeated or quadratic factors, or by not completing the square in the numerator.
What is the difference between the first and second shifting theorems?
The first multiplies f(t) by e^(at) and shifts F(s) to F(s − a); the second delays f by a and multiplies F(s) by e^(−as).
How should I revise Laplace transforms?
Learn the standard table, practise partial fractions separately, then solve full initial value problems from past papers under time.
Laplace transformengineering mathematicsM2M3B.Tech maths

Related guides

Keep exploring this maths topic

University Maths2 Nov 2026

How to Clear an Engineering Maths Back Paper (M1, M2 or M3)

A realistic plan for B.Tech students re-taking Engineering Mathematics M1, M2 or M3: confirm your scheme, map past papers, revise unit by unit, and master the high-yield question types through seven worked examples and a practice set with answers.

engineering maths back paperM1 back paperM2 back paperM3 back paper

By Maths Bodhi Team

Read guide

University Maths18 Nov 2026

Fourier Series in Engineering Maths: Coefficients, Square Wave and Half-Range Series

How to find Fourier series coefficients step by step, with five original worked examples (square wave, general period, half-range, harmonic analysis from a table) and the slips that cost marks in B.Tech exams.

Fourier seriesengineering mathematicshalf-range seriesharmonic analysis

By Maths Bodhi Team

Read guide

University Maths18 Nov 2026

Second Order Differential Equations: Constant Coefficients, Problems and Solutions

Solve second order linear differential equations with constant coefficients: the characteristic equation and its three root cases, undetermined coefficients with the modification rule, and a damped spring driven by a force, all worked step by step with practice problems.

differential equationssecond order ODEundetermined coefficientsmechanical vibrations

By Maths Bodhi Team

Read guide

University Maths18 Nov 2026

Newton-Raphson Method and Bisection Method: Formula, Iteration Tables and Examples

The Newton-Raphson formula and the bisection method worked step by step, with full iteration tables, how many iterations you need, when Newton fails, and practice questions with checked answers.

Newton-Raphson methodbisection methodnumerical methodsroot finding

By Maths Bodhi Team

Read guide

University Maths18 Nov 2026

First Order Differential Equations: Separable, Linear and Exact, with Practice Problems

How to recognise and solve the three main types of first order differential equations (separable, linear and exact), with six graded worked examples, a method-choice table, common mark-losing slips and practice problems with answers.

differential equationsfirst order ODEintegrating factorexact equations

By Maths Bodhi Team

Read guide

University Maths2 Nov 2026

From JEE to IIT First-Year Maths: What Changes, with Worked Examples

Why strong JEE students often struggle in first-year maths at an IIT, what the current IIT courses contain, six worked examples showing exactly what changes (ε-δ, proofs, abstract linear algebra, several variables), a first-semester plan, common mistakes and practice with answers.

IIT first year mathsJEE to IIT mathsB.Tech mathslinear algebra

By Maths Bodhi Team

Read guide