WhatsApp us

University differential equations, online

Differential equations tutor online: Ajay Vatsyayan

Ajay Vatsyayan teaches ordinary differential equations one to one online for college and engineering students: first-order methods, second-order linear equations, systems, Laplace transforms, a short look at series solutions and the first partial differential equations. The aim is simple: you learn to recognise which method an equation needs, carry it out cleanly and check the answer before you hand it in.

First-order ODEsSecond-order linearSystems x′ = AxLaplace transformsSeries solutionsIntro PDEsOnline
Ajay Vatsyayan, senior maths tutor at Maths Bodhi, Gurugram

1:1

Online sessions

ODEs to PDEs

From separable equations to the heat equation

Your course

US, B.Tech, UK or European syllabus

I can follow every solution in the textbook, but when the exam gives me a fresh equation I don't know which method to start with.

Laplace transforms are a big part of my B.Tech paper and I keep losing marks in the partial fractions at the end.

My course jumped from y″ + y = 0 to eigenvalues of matrices and heat equations, and I need the links explained, not more formulas.

Where marks go

Why a differential equations course feels like a box of separate tricks

A first ODE course teaches about a dozen solution methods in a dozen weeks, and each is manageable on its own. The trouble starts on the midterm, where questions no longer say which method to use. Most students who contact us can carry out the methods; what they lack is a quick way to classify an equation first.

So Ajay starts with a short set of questions to ask of any equation. What is the order? Is it linear? Are the coefficients constant? Is it homogeneous? Do the variables separate? A few answers point to the method, and within weeks the choice becomes automatic.

The second place marks disappear is the algebra after the calculus: a sign slip after a correct integrating factor, a wrong coefficient in the partial fractions at the end of a Laplace problem, or initial conditions applied to the wrong expression. One habit fixes most of these: substitute your answer back into the equation.

  • Choosing a trial solution for undetermined coefficients that already solves the homogeneous equation (resonance).
  • Dividing by a quantity that could be zero when separating variables, and losing an equilibrium solution.
  • Treating a nonlinear equation as linear because it looks familiar.

Topic map

What a differential equations course covers, topic by topic

Courses arrange these topics in slightly different orders, and engineering syllabi often give Laplace transforms and PDEs more time. The last column lists where we most often see marks dropped in the work students bring to sessions.

Typical content of a first course in ODEs (with intro PDEs)
TopicWhat you learnWhere marks are lost
Direction fields and modellingRead a slope field; turn a word problem (growth, cooling, mixing) into an ODERates in and out set up with the wrong units or signs
Separable equationsSeparate, integrate both sides, solve for yDropping constant solutions such as y = 0 when dividing
Linear first-order equationsStandard form y′ + p(t)y = g(t) and the integrating factor e^(∫p dt)Not dividing by the leading coefficient first
Exact equations and BernoulliTest ∂M/∂y = ∂N/∂x; reduce a Bernoulli equation to a linear oneIntegrating the second part twice when building the potential function
Second-order homogeneous, constant coefficientsCharacteristic equation; real, repeated and complex rootsWriting e^(rt) twice for a repeated root instead of te^(rt)
Undetermined coefficientsGuess the form of a particular solution from the right-hand sideMissing the extra factor of t when the guess overlaps the complementary solution
Variation of parameters and the WronskianA particular solution for any continuous forcing termUsing the formula before putting the equation in standard form
Laplace transformsTransform, solve algebraically, invert; step functions and the shifting theoremsLeaving out the initial-value terms in the transform of y″
Systems of linear ODEsSolve x′ = Ax with eigenvalues and eigenvectors; phase portraitsMishandling complex eigenvalues when building real solutions
Series solutionsPower series about an ordinary point; the recurrence relationIndex shifts when combining sums
Fourier series and boundary value problemsExpand a function in sines and cosines; eigenvalue problems on an intervalWrong limits or a missing factor of 2 in the coefficients
Intro PDEs: heat and wave equationsSeparation of variables with boundary and initial conditionsApplying the initial condition before the boundary conditions

Your course

How this matches US, B.Tech and UK differential equations courses

In the US, differential equations usually follows the calculus sequence, as a course of its own or combined with linear algebra. The University of Illinois lists MATH 285 Intro Differential Equations (ODEs, Fourier series, boundary value problems and an introduction to PDEs). Georgia Tech lists MATH 2552 Differential Equations, with analytic and numerical methods and modelling. Purdue's MA 26600 Ordinary Differential Equations covers first-order and nth-order linear equations, series solutions, the Laplace transform and linear systems, and Purdue also runs a combined MA 26200. UC Berkeley's Math 54 is Linear Algebra & Differential Equations.

In B.Tech programmes, ODEs sit inside the engineering mathematics papers. At AKTU, the second-semester maths paper includes the Laplace transform and, for most streams, higher-order linear ODEs; the second-year Mathematics-III paper solves the heat, wave and Laplace equations by separation of variables. VTU's 2025 first-year papers include first-order ODEs, and IIT Kanpur's MTH114M Introduction to Ordinary Differential Equations includes series solutions and the Laplace transform. We work from your own syllabus.

UK maths degrees meet ODEs in the first year too; Manchester, for example, lists ODEs and Applications (MATH11422) among its Year 1 units.

Laplace transforms for engineering exams

The Laplace topics that carry most marks in B.Tech papers.

Laplace transforms exam guide

The engineering mathematics papers

How ODEs fit into the whole M2 or M3 paper.

Engineering mathematics with Ajay

Worked examples

Three differential equations solved step by step

These are original problems at midterm and end-semester level, set out the way a marker expects: method named, every step shown, answer checked.

A mixing tank (linear first-order ODE)

A tank holds 100 L of brine containing 5 kg of salt. Brine with 0.2 kg of salt per litre flows in at 3 L/min, and the well-mixed solution flows out at 3 L/min. Find the amount of salt Q(t) after t minutes, the amount after 20 minutes, and when the tank holds 15 kg.

  1. Rate in = 0.2 × 3 = 0.6 kg/min. Rate out = (Q/100) × 3 = 0.03Q kg/min. So dQ/dt = 0.6 − 0.03Q, with Q(0) = 5.
  2. Standard form: Q′ + 0.03Q = 0.6. The integrating factor is e^(0.03t).
  3. Multiply through: (Q e^(0.03t))′ = 0.6 e^(0.03t). Integrate: Q e^(0.03t) = 20 e^(0.03t) + C, so Q = 20 + C e^(−0.03t).
  4. Initial condition: 5 = 20 + C gives C = −15, so Q(t) = 20 − 15e^(−0.03t).
  5. At t = 20: Q = 20 − 15e^(−0.6) ≈ 20 − 15(0.5488) ≈ 11.77 kg.
  6. For 15 kg: 15e^(−0.03t) = 5, so e^(−0.03t) = 1/3 and t = ln 3 / 0.03 ≈ 36.6 minutes.
  7. Check: as t → ∞, Q → 20 kg, matching the incoming concentration of 0.2 kg/L in 100 L.

Answer: Q(t) = 20 − 15e^(−0.03t); about 11.77 kg after 20 minutes; 15 kg after about 36.6 minutes.

Most lost marks in mixing problems come from the setup, not the solving. Write 'rate in − rate out' with units before any calculus.

Resonance in a second-order equation

Solve y″ + 4y = 8 cos 2t with y(0) = 1 and y′(0) = 0.

  1. Homogeneous part: r² + 4 = 0 gives r = ±2i, so y_c = C₁ cos 2t + C₂ sin 2t.
  2. The forcing term cos 2t already appears in y_c, so the usual guess A cos 2t + B sin 2t would give zero on the left. Multiply the guess by t: y_p = t(A cos 2t + B sin 2t).
  3. Substituting, y_p″ + 4y_p = −4A sin 2t + 4B cos 2t. Matching with 8 cos 2t gives B = 2 and A = 0, so y_p = 2t sin 2t.
  4. General solution: y = C₁ cos 2t + C₂ sin 2t + 2t sin 2t.
  5. y(0) = C₁ = 1. Differentiating, y′ = −2C₁ sin 2t + 2C₂ cos 2t + 2 sin 2t + 4t cos 2t, so y′(0) = 2C₂ = 0 and C₂ = 0.

Answer: y = cos 2t + 2t sin 2t

The t sin 2t term grows without bound: resonance, because the forcing frequency equals the natural frequency. Exams often ask you to say this in words.

An initial value problem by Laplace transform

Use the Laplace transform to solve y″ + 4y′ + 3y = 6 with y(0) = 1 and y′(0) = 0.

  1. Transform each term, keeping the initial values: L{y″} = s²Y − s·y(0) − y′(0) = s²Y − s, and L{y′} = sY − y(0) = sY − 1. The right side becomes 6/s.
  2. So (s²Y − s) + 4(sY − 1) + 3Y = 6/s, which gives (s² + 4s + 3)Y = 6/s + s + 4.
  3. Factor s² + 4s + 3 = (s + 1)(s + 3) and write Y = (s² + 4s + 6) / [s(s + 1)(s + 3)].
  4. Partial fractions by the cover-up rule: at s = 0 the coefficient is 6/3 = 2; at s = −1 it is (1 − 4 + 6)/((−1)(2)) = −3/2; at s = −3 it is (9 − 12 + 6)/((−3)(−2)) = 1/2.
  5. Y = 2/s − (3/2)/(s + 1) + (1/2)/(s + 3). Invert term by term.
  6. Check: y(0) = 2 − 3/2 + 1/2 = 1, and y′(0) = 3/2 − 3/2 = 0. As t → ∞, y → 2, the constant solution of 3y = 6.

Answer: y(t) = 2 − (3/2)e^(−t) + (1/2)e^(−3t)

Leaving out the −s and −1 from the initial values is the most common Laplace error we see.

Choosing a method

A quick way to decide how to solve an equation

This is the classification routine Ajay gives students in the first week. It settles most exam questions in under a minute.

  • First order and the variables separate: separate and integrate.
  • First order and linear in y: put it in standard form and use the integrating factor.
  • First order, not linear, written as M dx + N dy = 0: test for exactness; if that fails, look for an integrating factor or a substitution (Bernoulli, homogeneous).
  • Second order, linear, constant coefficients: characteristic equation for y_c, then undetermined coefficients if the right side is a polynomial, exponential, sine or cosine; otherwise variation of parameters.
  • Discontinuous or impulsive forcing, or initial conditions at t = 0 with an engineering flavour: the Laplace transform is usually the cleanest route.
  • Several unknown functions coupled together: write the system as x′ = Ax and use eigenvalues.
  • Variable coefficients near an ordinary point: try a power series and find the recurrence.

For the heat and wave equations, separation of variables turns one PDE into two ODEs you already know how to solve.

How sessions work

How online differential equations sessions are organised

Every session is online. Ajay writes by hand on a shared screen and you work on paper or a tablet, so each solution is built line by line. Times are agreed by your time zone when you enquire.

1. Before the first session

Send your course name and code, the syllabus or outline, the textbook or lecture notes you use (for example Boyce and DiPrima, Zill, or Kreyszig for engineers), a recent problem set you found hard and your exam dates.

2. A short diagnostic

Ajay gives you four or five equations and asks only which method you would use and why. Your answers show whether the gap is classification, a particular technique, or the algebra afterwards.

3. The weekly pattern

We follow your lecture schedule: the idea behind the method, one worked example, then equations you solve while Ajay watches and corrects. Practice is set for the days between sessions.

4. Before midterms and finals

Timed practice from past papers in your course's style, a one-page method sheet you write yourself, and a review of every error type you have made so far.

5. After the exam

We look at the marked paper together and decide whether to stop, move on to PDEs or numerical methods, or start the next course early.

Exam run-in

Our usual four-week plan before a differential equations final

This is how we typically use the last month before a final or end-semester exam. It is our usual approach, not a promise of a result, and it changes with your syllabus.

Typical exam run-in
WeekFocusBy the end of the week
1First-order methods and modellingClassify any first-order equation and set up mixing, cooling and growth problems correctly
2Second-order linear equations and vibrationsFind y_c for all three root cases and choose the right trial solution, including resonance
3Laplace transforms and systemsSolve an initial value problem by Laplace, including step functions, and a 2 × 2 system with real or complex eigenvalues
4Series, Fourier series and PDEs (as your course needs), then full papersSit two timed papers and correct them against a marking scheme

Fit

Who these sessions suit, and when another option is better

These sessions suit college students in a first differential equations course or a combined linear algebra and differential equations course, B.Tech students preparing ODEs, Laplace transforms or PDEs for engineering mathematics (including back papers), and Master's students who need the differential equations behind a course or project explained, as teaching only. Ajay holds an M.Tech and has 14+ years teaching maths.

They are not the right choice if you want someone to complete graded work for you. GATE differential equations are taught by another Maths Bodhi tutor, not Ajay, so tell us if GATE is your goal and we will introduce you to that tutor. Home tuition is available in Gurgaon (Gurugram). Students elsewhere in India and abroad learn with us online.

Systems and eigenvalues

If the systems unit is where you are stuck, the eigenvalue work comes from linear algebra.

Linear algebra with Ajay

Academic integrity

We teach the method; your graded work stays yours

Sessions are for learning. We explain, set practice and go through attempts you have made yourself. We do not complete graded assignments or online homework, sit quizzes, tests or exams for anyone, or write lab reports, projects or theses that will be assessed. For a question from graded work, Ajay teaches the method on a comparable equation and you solve your own.

Study guides

Free guides for this course

Worked examples and exam advice from the Maths Bodhi team, topic by topic.

FAQ

Questions students ask about differential equations tutoring

Is differential equations harder than Calculus 2?

Many students find it easier to follow but harder to organise, because there are more methods to choose between. Quick classification removes most of the difficulty.

Which textbook do you use?

Whichever your course uses. Send the chapter list and a problem set and Ajay keeps to its notation and order.

Can you help with Laplace transforms for my B.Tech exam?

Yes. Laplace transforms, inverse transforms, step functions and solving initial value problems are a regular part of our engineering mathematics work.

My course combines linear algebra and differential equations. Is that covered?

Yes. We teach the two together, so eigenvalues, eigenvectors and the solution of x′ = Ax make sense as one story.

I am in the US. When can sessions happen?

IST does not use daylight saving. In US winter, 7 pm Eastern is 5:30 am IST the next day and 7 pm Pacific is 8:30 am IST; times are agreed when you enquire.

How many sessions will I need?

It depends on how far behind you are and when your exam is. Many students book one or two sessions a week through a term, and more in the last few weeks.

Is there a trial class?

You can book a free demo class through the site. Bring one equation you found hard so the demo uses your own course.

Will you solve my online homework or take my test?

No. We teach the methods and review your own attempts, but we never complete graded work or sit assessments for students.

Next step

Tell us about your differential equations course

Send your university, course name or paper code, textbook, a problem you are stuck on and your time zone. Maths Bodhi will check whether Ajay is the right fit and suggest session times.